SIST EN 302 213 V1.1.2:2006

• Abstract:

  The present document provides the ETSI endorsement of the ITU-T Bearer Independent Call Control (BICC) Capability Set 2 protocol Recommendations Q.1902.1 [1], Q.1902.2 [2], Q.1902.3 [3], Q.1902.4 [4], Q.1902.5 [5], Q.1902.6 [6], Q.765.5 [7] Amendment 1 [8],Q.1912.1 [9], Q.1912.2 [10], Q.1912.3 [11], Q.1912.4 [12], Q.1922.2 [13], Q.1950 [14], Q.1970 [15], Q.1990 [16], Q.2150.0 [17], Q.2150.1 [18], Q.2150.2 [19], Q.2150.3 [20]. Formats, codes and procedures marked for national use or as network option are included for informative purposes for the international interface specification. If these items so marked are supported within a national network and operator's network, then it is proposed that they shall be supported in this manner.

• Status: Published
• Publication Date: 28-Feb-2006
• ICS: 33.040.35 - Telephone networks
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2006
• Due Date: 01-Mar-2006
• Completion Date: 01-Mar-2006
• Ref Project: ETSI EN 302 213 V1.1.2 (2004-01) - Services and Protocols for Advanced Networks (SPAN); Bearer Independent Call Control (BICC) Capability Set 2 (CS2); Protocol specification [ITU-T Recommendations Q.1902.1, Q.1902.2, Q.1902.3, Q.1902.4, Q.1902.5, Q.1902.6, Q.765.5 Amendment 1, Q.1912.1, Q.1912.2, Q.1912.3, Q.1912.4, Q.1922.2, Q.1950, Q.1970, Q.1990, Q.2150.0, Q.2150.1, Q.2150.2, Q.2150.3, modified]

SIST EN 302 213 V1.1.2:2006 is the Slovenian adoption of ETSI EN 302 213 V1.1.2, from ETSI. It specifies the ETSI endorsement of the ITU-T Bearer Independent Call Control (BICC) Capability Set 2 (CS2) protocol recommendations, so implementers know which BICC CS2 functions, messages, and interworking rules apply on the international interface.

What does SIST EN 302 213 V1.1.2:2006 specify?

SIST EN 302 213 V1.1.2:2006 is an endorsement document, not a standalone protocol design. It says which ITU-T BICC CS2 Recommendations are accepted for ETSI use, where ETSI modifies them, and which items are only informative when marked for national use or as a network option.

The document is organized into the usual front matter, scope, references, definitions and abbreviations, and the endorsement notice in Clause 4. It also includes two informative annexes.

Annex	What it covers
Annex ZA	Coding of the compatibility information for basic call procedures
Annex ZB	Bibliography

Clause 3 states that the terms, definitions and abbreviations from the referenced Recommendations [1] to [20] apply. Clause 4 then walks through each endorsed ITU-T Recommendation and lists the ETSI modifications.

What are the key requirements of SIST EN 302 213 V1.1.2:2006?

SIST EN 302 213 V1.1.2:2006 defines the ETSI profile for BICC CS2 by combining the ITU-T base Recommendations with ETSI-specific reference substitutions and exceptions. In practice, this tells an operator or vendor what to implement for BICC CS2 interoperability and what items remain outside the ETSI international interface profile.

Core endorsement and profile selection

Clause 4.1 endorses Q.1902.1 and replaces many of its internal references with ETSI standards such as EN 300 356-1, EN 300 356-2, EN 300 485, EN 301 069-1, EN 302 097, EN 301 848-1 and EN 301 140-1. The clause also gives two ETSI tables of required and not required basic call functions and generic signalling services. That matters because it defines the ETSI-usable subset of BICC CS2 instead of leaving every ITU-T option open.

Call control functions and signaling behavior

The basic call tables in Clause 4.1 show support for speech, 3,1 kHz audio, 64 kbit/s unrestricted, multirate connection types, en-bloc and overlap address signaling, continuity indication, forward transfer, compatibility procedures, simple segmentation, tones and announcements, propagation delay determination, simplified echo control, automatic repeat attempt, blocking and unblocking, reset, congestion control, INAP interaction, hop counter, collect call, geodetic location, codec negotiation and modification, joint BIWF support, global call reference, and out-of-band transport of DTMF tones and information. Items such as Nx64 kbit/s connection types, transit network selection, CIC group query, unequipped CIC, carrier selection information, Hard-to Reach, MWI, ITCC, REV and NP are marked not required for ETSI use. For a reader, this is the practical checklist for feature support.

Message and parameter handling

Clause 4.2 and Clause 4.3 adapt the message and format Recommendations. Q.1902.2 keeps BICC CS2 in scope and removes specific ISUP wording, while Q.1902.3 tightens how peer-to-peer protocol checks are applied. Q.1902.3 also adds a rule that BICC number lengths on the international interface are limited by E.164, while national networks may extend them internally if gateways only pass E.164 lengths to the international network. This is important for numbering plans and gateway design.

Clause 4.3 also adjusts the calling party number treatment, the carrier selection information reference, and the transmission medium requirement codes. In practice, these updates control how implementations encode parameters and which values are valid on the wire.

Basic call procedures and gateway rules

Clause 4.4 modifies Q.1902.4 and adds several operational rules. The number of digits supported in a call is independent of whether en bloc or overlap operation is used. Outgoing selection is limited to the specified connection types, including speech, 3,1 kHz audio, 64 kbit/s unrestricted and preferred, 2 × 64 kbit/s unrestricted, 384 kbit/s, 1 536 kbit/s, 1 920 kbit/s and Nx64 kbit/s unrestricted for N = 2 to 30.

The same clause says an outgoing gateway and an incoming gateway shall set the Temporary Alternative Routing (TAR) indicator to 0, regardless of the value received from the neighboring network. It also states that Hard to Reach is not supported, and it gives a national option for handling signaling transport out-of-service and in-service indications. That matters because it fixes gateway behavior during routing and transport transitions.

Interworking and transport support

Clause 4.10 says interworking with network signaling systems such as R1, R2, C5 and TUP is not supported in Q.1912.2. Clause 4.11 and Clause 4.12 cover interworking with H.323 and DSS2, and Clause 4.13 covers interaction with INAP CS2. Clauses 4.14 to 4.20 then connect BICC CS2 to bearer control and transport Recommendations Q.1950, Q.1970, Q.1990 and Q.2150.0 to Q.2150.3. For implementers, these clauses identify the companion protocols used when BICC has to talk to IP, ATM, SS7 or multimedia systems.

Annexes and implementation support

Clause 4.4 assigns normative status to Annex A and Annex D, while Annex B, Annex C and Annex E are informative. Clause 4.18, 4.19 and 4.20 also identify informative appendices for PICS and protocol examples. That tells a test or certification team where to find the conformance material versus background guidance.

What terms does SIST EN 302 213 V1.1.2:2006 define?

• BICC - Bearer Independent Call Control, the call control protocol family used here for bearer-independent interworking.
• CS2 - Capability Set 2, the specific BICC feature set endorsed by this standard.
• APM - Application Transport Mechanism, the signaling method used to carry application information.
• STC - Signalling Transport Converter, the sublayer used with transport services such as MTP3, MTP3b, SSCOP/SSCOPMCE or SCTP.
• INAP - Intelligent Network Application Protocol, used for interaction with intelligent network services.
• BIWF - Bearer InterWorking Function, referenced in the basic call tables for codec negotiation and bearer handling.
• PICS - Protocol Implementation Conformance Statement, the conformance proforma used to describe implementation support.
• TAR - Temporary Alternative Routing, a routing indicator that gateways set to 0 in the ETSI rules.

Who uses SIST EN 302 213 V1.1.2:2006?

SIST EN 302 213 V1.1.2:2006 is used by telecom network operators, switch and softswitch vendors, signaling gateway designers, and interoperability test labs. They use it when implementing BICC CS2, choosing supported call-control options, mapping ETSI references to ITU-T recommendations, and checking how BICC interacts with ISUP, H.323, DSS2, INAP, and transport networks. Quality managers and buyers use it to confirm whether a product claims the ETSI BICC CS2 profile or a broader ITU-T profile.

Which standards are used with SIST EN 302 213 V1.1.2:2006?

The main companion standards are the ITU-T BICC CS2 recommendations Q.1902.1 to Q.1902.6, which define the protocol set itself, and Q.765.5 plus Amendment 1, which cover the application transport mechanism for BICC. Q.1912.1 to Q.1912.4 provide interworking with SS7 ISUP, selected signaling systems, H.323 and DSS2. Q.1922.2 covers interaction with INAP CS2, while Q.1950, Q.1970 and Q.1990 cover bearer control, IP bearer control and bearer control tunnelling. Q.2150.0 to Q.2150.3 define the generic signaling transport service and the transport converters for MTP3/MTP3b, SSCOP/SSCOPMCE and SCTP.

The ETSI references used to replace ITU-T references include EN 300 356-1 and EN 300 356-2 for ISUP material, EN 300 485 for cause and location usage, EN 301 069-1 for the application transport mechanism, EN 301 848-1 for BICC CS1, EN 300 008-1 for MTP, EN 301 004-1 for MTP level 3 on B-ISDN, EN 300 436-1 for SSCOP, EN 300 403-1 and EN 300 403-2 for DSS1, EN 300 899-1 for ISUP and DSS1 interworking, EN 301 140-1 for INAP CS2, EN 301 464 for ISUP and INAP interaction, and RFC 2327 for SDP.

What does the SIST EN 302 213 V1.1.2:2006 document contain?

The document contains endorsement tables that map ITU-T references to ETSI replacements, plus exception notes that change specific paragraphs and parameter meanings. It also contains tables for basic call functions, generic signaling procedures, supplementary services, and additional functions, each marked as required, not required, or national-use only for the ETSI profile.

It also contains annexes and appendices that support implementation work: compatibility coding, timers, start-up procedures, test calls, reuse of idle bearers, structured AAL1 bearer use, message flow examples, generic BCF functions, and PICS proformas. In practice, those parts are the places to look for implementation, testing, and conformance support rather than for a new protocol definition.

SLOVENSKI STANDARD
01-marec-2006
6WRULWYHLQSURWRNROL]DQDSUHGQDRPUHåMD63$1±'UXJLQDERU]PRåQRVWL]D
NUPLOMHQMHRGQRVLOFDQHRGYLVQHJDNOLFD%,&&LQWHOLJHQWQHJDRPUHåMD&6±
46SHFLILNDFLMDSURWRNROD>,787SULSRURþLOD444
44
44GRSROQLOR44444
4
44444VSUHPHQMHQ@
Services and Protocols for Advanced Networks (SPAN); Bearer Independent Call Control
(BICC) Capability Set 2 (CS2); Protocol specification [ITU-T Recommendations
Q.1902.1, Q.1902.2, Q.1902.3, Q.1902.4, Q.1902.5, Q.1902.6, Q.765.5 Amendment 1,
Q.1912.1, Q.1912.2, Q.1912.3, Q.1912.4, Q.1922.2, Q.1950, Q.1970, Q.1990, Q.2150.0,
Q.2150.1, Q.2150.2, Q.2150.3, modified]
Ta slovenski standard je istoveten z: EN 302 213 Version 1.1.2
ICS:
33.040.35 Telefonska omrežja Telephone networks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

European Standard (Telecommunications series)

Services and Protocols for Advanced Networks (SPAN);
Bearer Independent Call Control (BICC) Capability Set 2 (CS2);
Protocol specification
[ITU-T Recommendations Q.1902.1, Q.1902.2, Q.1902.3, Q.1902.4, Q.1902.5, Q.1902.6,
Q.765.5 Amendment 1, Q.1912.1, Q.1912.2, Q.1912.3, Q.1912.4, Q.1922.2, Q.1950, Q.1970,
Q.1990, Q.2150.0, Q.2150.1, Q.2150.2, Q.2150.3, modified]

2 ETSI EN 302 213 V1.1.2 (2004-01)

Reference
DEN/SPAN-130261
Keywords
APM, ATM, BICC, CS2, endorsement,
interworking, IP, ISDN, SS7
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2004.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 302 213 V1.1.2 (2004-01)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Definitions and abbreviations.8
4 Endorsement notice.9
4.1 Q.1902.1.9
4.2 Q.1902.2.12
4.3 Q.1902.3.12
4.4 Q.1902.4.15
4.5 Q.1902.5.16
4.6 Q.1902.6.16
4.7 Q.765.5.16
4.8 Q.765.5 Amendment 1 .17
4.9 Q.1912.1.17
4.10 Q.1912.2.18
4.11 Q.1912.3.19
4.12 Q.1912.4.20
4.13 Q.1922.2.20
4.14 Q.1950.21
4.15 Q.1970.21
4.16 Q.1990.22
4.17 Q.2150.0.22
4.18 Q.2150.1.22
4.19 Q.2150.2.22
4.20 Q.2150.3.23
Annex ZA (informative): Coding of the compatibility information for basic call procedures.24
Annex ZB (informative): Bibliography.25
History .26

ETSI
4 ETSI EN 302 213 V1.1.2 (2004-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).

National transposition dates
Date of adoption of this EN: 19 December 2003
Date of latest announcement of this EN (doa): 31 March 2004
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2004
Date of withdrawal of any conflicting National Standard (dow): 30 September 2004

ETSI
5 ETSI EN 302 213 V1.1.2 (2004-01)
1 Scope
The present document provides the ETSI endorsement of the ITU-T Bearer Independent Call Control (BICC) Capability
Set 2 protocol Recommendations Q.1902.1 [1], Q.1902.2 [2], Q.1902.3 [3], Q.1902.4 [4], Q.1902.5 [5], Q.1902.6 [6],
Q.765.5 [7] Amendment 1 [8],Q.1912.1 [9], Q.1912.2 [10], Q.1912.3 [11], Q.1912.4 [12], Q.1922.2 [13], Q.1950 [14],
Q.1970 [15], Q.1990 [16], Q.2150.0 [17], Q.2150.1 [18], Q.2150.2 [19], Q.2150.3 [20].
Formats, codes and procedures marked for national use or as network option are included for informative purposes for
the international interface specification. If these items so marked are supported within a national network and operator's
network, then it is proposed that they shall be supported in this manner.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ITU-T Recommendation Q.1902.1: "Bearer Independent Call Control protocol (Capability Set 2):
Functional description".
[2] ITU-T Recommendation Q.1902.2: "Bearer Independent Call Control protocol (Capability Set 2)
and Signalling System No. 7 ISDN user part: General functions of messages and parameters".
[3] ITU-T Recommendation Q.1902.3: "Bearer Independent Call Control protocol (Capability Set 2)
and Signalling System No. 7 ISDN user part: Formats and codes".
[4] ITU-T Recommendation Q.1902.4: "Bearer Independent Call Control protocol (Capability Set 2):
Basic call procedures".
[5] ITU-T Recommendation Q.1902.5: "Bearer Independent Call Control protocol (Capability Set 2):
Exceptions to the application transport mechanism in the context of BICC".
[6] ITU-T Recommendation Q.1902.6: "Bearer Independent Call Control protocol (Capability Set 2):
Generic signalling procedures for the support of the ISDN user part supplementary services and
for bearer redirection".
[7] ITU-T Recommendation Q.765.5: "Signalling system No. 7 - Application transport mechanism:
Bearer Independent Call Control (BICC)".
[8] ITU-T Recommendation Q.765.5 Amendment 1: "Bearer Independent Call Control Capability
Set 2".
[9] ITU-T Recommendation Q.1912.1: "Interworking between Signalling System No. 7 ISDN user
part and the Bearer Independent Call Control protocol".
[10] ITU-T Recommendation Q.1912.2: "Interworking between selected signalling systems (PSTN
access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol".
[11] ITU-T Recommendation Q.1912.3: "Interworking between H.323 and the Bearer Independent Call
Control protocol".
ETSI
6 ETSI EN 302 213 V1.1.2 (2004-01)
[12] ITU-T Recommendation Q.1912.4: "Interworking between Digital Subscriber Signalling System
No. 2 and the Bearer Independent Call Control protocol".
[13] ITU-T Recommendation Q.1922.2: "Interaction between the Intelligent Network application
protocol Capability set 2 and the Bearer independent call control protocol".
[14] ITU-T Recommendation Q.1950: "Bearer independent call bearer control protocol".
[15] ITU-T Recommendation Q.1970: "BICC IP Bearer control protocol".
[16] ITU-T Recommendation Q.1990: "BICC Bearer Control Tunnelling Protocol".
[17] ITU-T Recommendation Q.2150.0: "Generic signalling transport service".
[18] ITU-T Recommendation Q.2150.1: "Signalling Transport Converter on MTP3 and MTP3b".
[19] ITU-T Recommendation Q.2150.2: "Signalling transport converter on SSCOP and SSCOPMCE".
[20] ITU-T Recommendation Q.2150.3: "Signalling transport converter on SCTP".
[21] ETSI EN 301 069-1: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
ISDN User Part (ISUP); Application transport mechanism; Part 1: Protocol specification
[ITU-T Recommendation Q.765, modified]".
[22] ETSI EN 300 485: "Integrated Services Digital Network (ISDN); Definition and usage of cause
and location in Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7
(SS7) ISDN User Part (ISUP) [ITU-T Recommendation Q.850 (1998) with addendum modified]".
[23] ETSI EN 300 356-2: "Integrated Services Digital Network (ISDN); Signalling System No. 7
(SS7); ISDN User Part (ISUP) version 4 for the international interface; Part 2: ISDN
supplementary service [ITU-T Recommendation Q.730 (1999) modified]".
[24] ETSI EN 300 356-1: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
ISDN User Part (ISUP) version 4 for the international interface; Part 1: Basic services
[ITU-T Recommendations Q.761 to Q.764 (1999) modified]".
[25] ETSI EN 302 097: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
ISDN User Part (ISUP); Enhancement for support of Number Portability (NP) [ITU-T
Recommendation Q.769.1 (2000), modified]".
[26] ETSI EN 301 848-1: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
Bearer Independent Call Control (BICC); Signalling procedures in an ATM/IP/. backbone
network; Capability Set 1 (CS1); Part 1: Protocol specification [ITU-T Recommendations Q.1901
and Q.765.5, modified]".
[27] ETSI EN 300 008-1: "Integrated Services Digital Network (ISDN); Signalling System No.7;
Message Transfer Part (MTP) to support international interconnection; Part 1: Protocol
specification [ITU-T Recommendations Q.701, Q.702, Q.703, Q.704, Q.705, Q.706, Q.707 and
Q.708 modified]".
[28] ETSI EN 301 004-1: "Broadband Integrated Services Digital Network (B-ISDN); Signalling
System No.7; Message Transfer Part (MTP) level 3 functions and messages to support
international interconnection; Part 1: Protocol specification [ITU-T Recommendation Q.2210
(1996), modified]".
[29] ETSI EN 300 436-1: "Broadband Integrated Services Digital Network (B-ISDN); Signalling ATM
Adaptation Layer (SAAL); Service Specific Connection Oriented Protocol (SSCOP);
Part 1: Protocol specification [ITU-T Recommendation Q.2110, modified]".
[30] ETSI EN 301 062-1: "Integrated Services Digital Network (ISDN); Signalling System No.7;
Support of Virtual Private Network (VPN) applications with Private network Q reference point
Signalling System number 1 (PSS1) information flows; Part 1: Protocol specification
[ITU-T Recommendations Q.765.1 and Q.699.1, modified]".
[31] ETSI ETS 300 374-1: "Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1); Core
Intelligent Network Application Protocol (INAP); Part 1: Protocol specification".
ETSI
7 ETSI EN 302 213 V1.1.2 (2004-01)
[32] ETSI EN 301 140-1: "Intelligent Network (IN); Intelligent Network Application Protocol (INAP);
Capability Set 2 (CS2); Part 1: Protocol specification".
[33] ETSI ETS 300 656: "Broadband Integrated Services Digital Network (B-ISDN); Signalling
System No.7; B-ISDN User Part (B-ISUP) Capability Set 1 (CS1); Basic services
[ITU-T Recommendations Q.2761 to Q.2764 (1995), modified]".
[34] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[35] ETSI EN 300 403-2: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 2: Specification and Description Language (SDL) diagrams".
[36] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[37] ETSI EN 300 121: "Integrated Services Digital Network (ISDN); Application of the ISDN User
Part (ISUP) of ITU-T Signalling System No. 7 (SS7) for international ISDN interconnections
(ISUP version 1) Amendment 1: International Emergency Preference Scheme (IEPS) service
[ITU-T Recommendation Q.767 Amendment 1 (2002), modified]".
[38] ETSI EN 300 356 (all parts): "Integrated Services Digital Network (ISDN); Signalling System
No.7 (SS7); ISDN User Part (ISUP) version 4 for the international interface".
[39] ETSI EN 301 850-1: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
ISDN User Part (ISUP); Application transport mechanism; Support of the generic addressing and
transport protocol; Part 1: Protocol specification [ITU-T Recommendation Q.765.4, modified)".
[40] ETSI EN 300 899-1: "Integrated Services Digital Network (ISDN); Signalling System No.7;
Interworking between ISDN User Part (ISUP) version 2 and Digital Subscriber Signalling System
No. one (DSS1); Part 1: Protocol specification [ITU-T Recommendation Q.699, modified]".
[41] ETSI TS 101 341: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Protocol Implementation Conformance Statement (PICS) proforma for the support of
supplementary services in H.323; Support of H.450.2: Call transfer supplementary services for
H.323".
[42] ETSI TS 101 342: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Protocol Implementation Conformance Statement (PICS) proforma for the support of
supplementary services in H.323; Support of H.450.3: Call diversion supplementary services for
H.323".
[43] ETSI ETS 300 495: "Broadband Integrated Services Digital Network (B-ISDN); Signalling
System No.7; Interworking between Broadband ISDN User Part (B-ISUP) and Digital Subscriber
Signalling System No. two (DSS2) [ITU-T Recommendation Q.2650 (1995), modified]".
[44] ETSI ETS 300 496: "Broadband Integrated Services Digital Network (B-ISDN); Signalling
System No.7; Interworking between Broadband ISDN User Part (B-ISUP) and narrowband ISDN
User Part (ISUP) [ITU-T Recommendation Q.2660 (1995), modified]".
[45] ETSI ETS 300 657: "Broadband Integrated Services Digital Network (B-ISDN); Signalling
System No.7; B-ISDN User Part (B-ISUP) Capability Set 1 (CS1); Supplementary services
[ITU-T Recommendation Q.2730 (1995), modified]".
[46] ETSI EN 300 443-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3
specification for basic call/bearer control; Part 1: Protocol specification [ITU-T Recommendation
Q.2931 (1995), modified]".
[47] ETSI ETS 300 796-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Generic functional protocol; Core aspects;
Part 1: Protocol specification [ITU-T Recommendation Q.2932.1 (1996), modified]".
ETSI
8 ETSI EN 302 213 V1.1.2 (2004-01)
[48] ETSI ETS 300 661-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Direct Dialling In (DDI) supplementary
service; Part 1: Protocol specification [ITU-T Recommendation Q.2951, clause 1 (1995),
modified]".
[49] ETSI ETS 300 662-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Multiple Subscriber Number (MSN)
supplementary service; Part 1: Protocol specification [ITU-T Recommendation Q.2951, clause 2
(1995), modified]".
[50] ETSI ETS 300 663-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Calling Line Identification Presentation
(CLIP) supplementary service; Part 1: Protocol specification [ITU-T Recommendation Q.2951,
clause 3 (1995), modified]".
[51] ETSI ETS 300 664-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Calling Line Identification Restriction
(CLIR) supplementary service; Part 1: Protocol specification [ITU-T Recommendation Q.2951,
clause 4 (1995), modified]".
[52] ETSI ETS 300 665-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Connected Line Identification
Presentation (COLP) supplementary service; Part 1: Protocol specification
[ITU-T Recommendation Q.2951, clause 5 (1995), modified]".
[53] ETSI ETS 300 666-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Connected Line Identification Restriction
(COLR) supplementary service; Part 1: Protocol specification [ITU-T Recommendation Q.2951,
clause 6 (1995), modified]".
[54] ETSI ETS 300 667-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Subaddressing (SUB) supplementary
service; Part 1: Protocol specification [ITU-T Recommendation Q.2951, clause 8 (1995),
modified]".
[55] ETSI EN 301 485-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; Support of ATM end system addressing
format by Number identification supplementary services; Part 1: Protocol specification
[ITU-T Recommendation Q.2951.9 (1999) modified]".
[56] ETSI ETS 300 668-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital
Subscriber Signalling System No. two (DSS2) protocol; User-to-User Signalling (UUS)
supplementary service; Part 1: Protocol specification [ITU-T Recommendation Q.2957, clause 1
(1995), modified]".
[57] ETSI EN 301 464: " Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
ISDN User Part (ISUP) version 4 interactions with the Intelligent Network Application Part
(INAP); Part 1: Protocol specification [ITU-T Recommendation Q.1601 (1999), modified]".
[58] IETF RFC 2327: "SDP: Session Description Protocol".
3 Definitions and abbreviations
For the purposes of the present document, the terms, definitions and abbreviations given in the reference specifications
[1] to [20] apply.
ETSI
9 ETSI EN 302 213 V1.1.2 (2004-01)
4 Endorsement notice
4.1 Q.1902.1
The elements of ITU-T Recommendation Q.1902.1 [1] apply, with the following modifications.
1) Replace references as shown below
Reference in ITU-T Recommendation Q.1902.1 [1] Modified reference
ITU-T Recommendation Q.850 EN 300 485 [22]
ITU-T Recommendation Q.730 EN 300 356-2 [23]
ITU-T Recommendation Q.761 EN 300 356-1 [24]
ITU-T Recommendation Q.762 EN 300 356-1 [24]
ITU-T Recommendation Q.763 EN 300 356-1 [24]
ITU-T Recommendation Q.764 EN 300 356-1 [24]
ITU-T Recommendation Q.765 EN 301 069-1 [21]
ITU-T Recommendation Q.769.1 EN 302 097 [25]
ITU-T Recommendation Q.1901 EN 301 848-1 [26]
ITU-T Recommendation Q.1902.2 ITU-T Recommendation Q.1902.2 [2] as modified by the
present document
ITU-T Recommendation Q.1902.3 ITU-T Recommendation Q.1902.3 [3] as modified by the
present document
ITU-T Recommendation Q.1902.4 ITU-T Recommendation Q.1902.4 [4] as modified by the
present document
ITU-T Recommendation Q.1902.5 ITU-T Recommendation Q.1902.5 [5] as modified by the
present document
ITU-T Recommendation Q.1902.6 ITU-T Recommendation Q.1902.6 [6] as modified by the
present document
ITU-T Recommendation Q.1912.1 ITU-T Recommendation Q.1912.1 [9] as modified by the
present document
ITU-T Recommendation Q.701 EN 300 008-1 [27]
ITU-T Recommendation Q.704 EN 300 008-1 [27]
ITU-T Recommendation Q.2210 EN 301 004-1 [28]
ITU-T Recommendation Q.2110 EN 300 436-1 [29]
ITU-T Recommendation Q.2111 FFS (For Further Study) (SSCOPMCE)
ITU-T Recommendation Q.765.1 EN 301 062-1 [30]
ITU-T Recommendation Q.765.4 EN 301 850-1 [39] (APM user GAT)
ITU-T Recommendation Q.765.5 ITU-T Recommendation Q.765.5 [7] as modified by the
present document
ITU-T Recommendation Q.765.5 Amd. 1 ITU-T Recommendation Q.765.5 Amendment 1 [8] as
modified by the present document
ITU-T Recommendation Q.1218 ETS 300 374-1 [31]
ITU-T Recommendation Q.1228 EN 301 140-1 [32]
ITU-T Recommendation Q.2150.0 ITU-T Recommendation Q.2150.0 [17] as modified by the
present document
ITU-T Recommendation E.412 FFS (For Further Study) (Network management controls)
ITU-T Recommendation Q.703 EN 300 008-1 [27]
ITU-T Recommendation Q.2763 ETS 300 656 [33]
ITU-T Recommendation G.711 FFS (For Further Study) (PCM)
ITU-T Recommendation Q.115 FFS (For Further Study) (Echo control logic)
ITU-T Recommendation Q.542 FFS (For Further Study) (Operations and maintenance)
ITU-T Recommendation Q.706 EN 300 008-1 [27]
ITU-T Recommendation Q.931 EN 300 403-1 [34] and EN 300 403-2 [35]
ITU-T Recommendation Q.932 EN 300 196-1 [36]
ITU-T Recommendation G.732 FFS (For Further Study) (Characteristics of 2 048 kbits/s
PCM)
ITU-T Recommendation G.744 FFS (For Further Study) (Second order 8 448 kbit/s PCM)
ITU-T Recommendation Q.1950 ITU-T Recommendation Q.1950 [14] as modified by the
present document
ITU-T Recommendation Q.1990 ITU-T Recommendation Q.1990 [16] as modified by the
present document
ITU-T Recommendation Q.2150.1 ITU-T Recommendation Q.2150.1 [18] as modified by the
present document
ETSI
10 ETSI EN 302 213 V1.1.2 (2004-01)
2) Replace Table 1/Q.1902.1 by the following table
Basic Call
National International International
Function/service use according use according use according
to ITU-T to ITU-T to ETSI
Speech/3,1 kHz audio + + +
64 kbit/s unrestricted + + +
Multirate connection types (note 1) + + +
Nx64 kbit/s connection types + + -
En-bloc address signalling + + +
Overlap address signalling + + +
Transit network selection + - -
Continuity indication + + +
Forward transfer - + +
Signalling procedures for connection type allowing fallback +
+ +
capability
Compatibility procedure (BICC and BAT APM user application) + + +
Simple segmentation + + +
Tones and announcements + + +
Propagation delay determination procedure + + +
Simplified echo control signalling procedures + + +
Automatic repeat attempt + + +
Blocking and unblocking + + +
CIC group query + - -
Dual seizure + + +
Reset + + +
Receipt of unreasonable signalling information + + +
Access delivery informatio
...