kSIST FprEN 2882:2022

Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

This document specifies the characteristics for hexagon nuts, with counterbore and captive washer, with a self-locking feature achieved by forming the upper portion out-of-round, in steel, cadmium plated, MoS2 lubricated, classification 1 100 MPa /235 °C .

Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit Aussenkung und Bördelscheibe, aus Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °C

Série aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier, cadmiés, lubrifiés MoS2 - Classification: 1 100 MPa (à température ambiante)/235 °C

Le présent document spécifie les caractéristiques des écrous hexagonaux, avec chambrage et rondelle captive, avec déformation de la partie supérieure du faux-rond pour assurer le freinage, en acier, cadmiés, lubrifiés au MoS2, classification 1 100 MPa/235 °C.

Aeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko, iz jekla, kadmirane, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/235 °C

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Jan-2022
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 28-Sep-2022
• Due Date: 16-Nov-2022
• Completion Date: 29-Sep-2022
• Ref Project: FprEN 2882 - Aerospace series - Nut, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

Relations

• Revised: SIST EN 2882:2009 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• Effective Date: 23-Sep-2020
• Revised: SIST EN 2882:2009 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• Effective Date: 18-Jan-2023
• Revised: SIST EN 2882:2009 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2882:2022
01-januar-2022
Aeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko,
iz jekla, kadmirane, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi
okolice)/235 °C
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer,
in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient
temperature) / 235 °C
Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit Aussenkung und
Bördelscheibe, aus Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa (bei
Raumtemperatur) / 235 °C
Série aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle
captive, en acier, cadmiés, lubrifiés MoS2 - Classification: 1 100 MPa (à température
ambiante)/235 °C
Ta slovenski standard je istoveten z: prEN 2882:2021
ICS:
49.030.30 Matice Nuts
oSIST prEN 2882:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2882:2022

---------------------- Page: 2 ----------------------
oSIST prEN 2882:2022


DRAFT
EUROPEAN STANDARD
prEN 2882
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2021
ICS Will supersede EN 2882:2006
English Version

Aerospace series - Nuts, hexagonal, self-locking, with
counterbore and captive washer, in steel, cadmium plated,
MoS2 lubricated - Classification: 1 100 MPa (at ambient
temperature) / 235 °C
Série aérospatiale - Écrous hexagonaux, à freinage Luft- und Raumfahrt - Sechskantmuttern,
interne, avec chambrage et rondelle captive, en acier, selbstsichernd, mit Aussenkung und Bördelscheibe, aus
cadmiés, lubrifiés MoS2 - Classification: 1 100 MPa (à Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa
température ambiante)/235 °C (bei Raumtemperatur) / 235 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2882:2021:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2882:2022
prEN 2882:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Configuration – Dimensions – Masses. 5
4.2 Materials . 5
4.3 Surface treatment . 5
5 Designation. 8
6 Marking . 8
7 Technical specification . 8
8 Quality management systems . 8
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 2882:2022
prEN 2882:2021 (E)
European foreword
This document (prEN 2882:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe – Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2882:2006.
3

---------------------- Page: 5 ----------------------
oSIST prEN 2882:2022
prEN 2882:2021 (E)
1 Scope
This document specifies th
...