SIST EN 60454-3-2:2006

Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives

This sheet of IEC 60454-3 contains the requirements for: Polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone.

Selbstklebende Bänder für elektrotechnische Anwendungen -- Teil 3: Bestimmungen für einzelne Materialien -- Blatt 2: Anforderungen für Bänder aus Polyester-Folie mit warmhärtendem oder thermoplastischem Kautschuk oder vernetztem Acryl-Klebstoff

Rubans adhésifs sensibles à la pression à usages électriques -- Partie 3: Spécifications pour matériaux particuliers -- Feuille 2: Exigences pour rubans en polyester avec un adhésif en caoutchouc thermodurcissable, caoutchouc thermoplastique ou en acrylique réticulé

IEC 60454-3-2:2006 contient les exigences relatives aux Rubans en polyester avec un adhésif en caoutchouc thermodurcissable, caoutchouc thermoplastique ou en acrylique réticulé. Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de performances établis. Cependant, il convient que le choix d'un matériau par un utilisateur et pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et non pas fondé sur cette seule spécification. Cette troisième édition de la CEI 60454-3-2 remplace la deuxième édition, parue en 1998, et son contenu est consolidé avec le texte de la CEI 60464-3-3 (1998). Elle constitue une révision technique.
Mots clés: Rubans en polyester avec un adhésif en caoutchouc thermodurcissable, caoutchouc thermoplastique ou en acrylique réticulé

Samolepilni trakovi za uporabo v elektrotehniki – 3. del: Specifikacije za posamezne materiale – List 2: Zahteve za trakove iz poliestra z lepili z gumijastimi duromernimi, gumijastimi plastomernimi ali prepletenimi akrilnimi snovmi (IEC 60454-3-2:2006)

General Information

• Status: Published
• Publication Date: 30-Sep-2006
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IZO - Insulating materials
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2006
• Due Date: 01-Oct-2006
• Completion Date: 01-Oct-2006
• Ref Project: EN 60454-3-2:2006 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives

Relations

• Replaces: SIST EN 60454-3-2:2001 - Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesives
• Effective Date: 01-Dec-2009
• Replaces: SIST EN 60454-3-3:2001 - Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Polyester film tapes with rubber thermoplastic adhesive
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60454-3-2:2001 - Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesives
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60454-3-2:2006

STANDARD
oct 2006
Samolepilni trakovi za uporabo v elektrotehniki – 3. del: Specifikacije za
posamezne materiale – List 2: Zahteve za trakove iz poliestra z lepili z
gumijastimi duromernimi, gumijastimi plastomernimi ali prepletenimi akrilnimi
snovmi (IEC 60454-3-2:2006)
Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications
for individual materials – Sheet 2: Requirements for polyester film tapes with rubber
thermosetting, rubber thermoplastic or acrylic crosslinked adhesives (IEC 60454-3-
2:2006)
ICS 29.035.20 Referenčna številka
SIST EN 60454-3-2:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60454-3-2

NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM

ICS 29.035.20 Supersedes EN 60454-3-2:1998 & EN 60454-3-3:1998


English version


Pressure-sensitive adhesive tapes for electrical purposes
Part 3: Specifications for individual materials
Sheet 2: Requirements for polyester film tapes with rubber thermosetting,
rubber thermoplastic or acrylic crosslinked adhesives
(IEC 60454-3-2:2006)


Rubans adhésifs sensibles à la pression Selbstklebende Bänder
à usages électriques für elektrotechnische Anwendungen
Partie 3: Spécifications Teil 3: Bestimmungen
pour matériaux particuliers für einzelne Materialien
Feuille 2: Exigences pour rubans Blatt 2: Anforderungen für Bänder
en polyester avec un adhésif aus Polyester-Folie mit warmhärtendem
en caoutchouc thermodurcissable, oder thermoplastischem Kautschuk
caoutchouc thermoplastique oder vernetztem Acryl-Klebstoff
ou en acrylique réticulé (IEC 60454-3-2:2006)
(CEI 60454-3-2:2006)


This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60454-3-2:2006 E

---------------------- Page: 2 ----------------------

EN 60454-3-2:2006 - 2 -
Foreword
The text of document 15/251/FDIS, future edition 3 of IEC 60454-3-2, prepared by IEC TC 15, Standards
on specifications for electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60454-3-2 on 2006-02-01.
This European Standard supersedes EN 60454-3-2:1998 and EN 60454-3-3:1998. The revision includes
its consolidation with the text of EN 60454-3-3.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60454-3-2:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60454-3-2:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60426 1973 Test methods for determining - -
electrolytic corrosion with insulating
materials

IEC 60454-1 1992 Specifications for pressure-sensitive EN 60454-1 1994
adhesive tapes for electrical purposes
Part 1: General requirements

IEC 60454-2 1994 Part 2: Methods of test EN 60454-2 1995

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 60454-3-2





Third edition
2006-01


Pressure-sensitive adhesive tapes
for electrical purposes –
Part 3:
Specifications for individual materials –
Sheet 2: Requirements for polyester film tapes
with rubber thermosetting, rubber thermoplastic
or acrylic crosslinked adhesives

 IEC 2006  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale J
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 60454-3-2  IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –

Part 3: Specifications for individual materials –
Sheet 2: Requirements for polyester film tapes
with rubber thermosetting, rubber thermoplastic
or acrylic crosslinked adhesives


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elemen
...