iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60745-2-15:2009/A1:2010

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006/A1:2009)

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006/A1:2009)

Amandma A1:2010 je dodatek k standardu SIST EN 60745-2-15:2009
This clause of Part 1 is applicable, except as follows: : This standard applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades. This standard is not applicable to hedge trimmers with a rotating blade.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-15: Besondere Anforderungen für Heckenscheren (IEC 60745-2-15:2006/A1:2009)

Outils électroportatifs à moteur - Sécurité - Partie 2-15: Règles particulières pour les taille-haies (CEI 60745-2-15:2006/A1:2009)

Električna ročna orodja - Varnost - 2-15. del: Posebne zahteve za škarje za živo mejo - Dopolnilo A1 (IEC 60745-2-15:2006/A1:2009)

Amandma A1:2010 je dodatek k standardu SIST EN 60745-2-15:2009.
Uporablja se ta klavzula prvega dela, razen kot sledi: Ta standard velja za škarje za živo mejo, ki so načrtovane, da jih uporablja en operater za prirezovanje živih meja in grmov, z uporabo enega ali več linearnih recipročnih rezil. Ta standard ne velja za škarje za živo mejo z rotirajočim rezilom.

General Information

Status
Withdrawn
Publication Date
10-Oct-2010
Withdrawal Date
04-Jul-2023
ICS
25.140.20 - Electric tools
65.060.70 - Horticultural equipment
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Jul-2023
Due Date
28-Jul-2023
Completion Date
05-Jul-2023
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Ref Project
EN 60745-2-15:2009/A1:2010 - Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers

Relations

Replaced By
SIST EN 62841-4-2:2019 - Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017/COR1:2018)
Effective Date
30-Jul-2019
Amends
SIST EN 60745-2-15:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-15: Particular requirements for hedge trimmers
Effective Date
01-Nov-2010
Amends
SIST EN 60745-2-15:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-15: Particular requirements for hedge trimmers
Effective Date
28-Jan-2023

Buy Standard

EN 60745-2-15:2009/A1:2010EN 60745-2-15:2009/A1:2010
PreviousNext
Amendment
EN 60745-2-15:2009/A1:2010
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-15:2009/A1:2010
01-november-2010
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DãNDUMH]DåLYR
PHMR'RSROQLOR$ ,(&$
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for
hedge trimmers (IEC 60745-2-15:2006/A1:2009)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-15: Besondere
Anforderungen für Heckenscheren (IEC 60745-2-15:2006/A1:2009)
Outils électroportatifs à moteur - Sécurité - Partie 2-15: Règles particulières pour les
taille-haies (CEI 60745-2-15:2006/A1:2009)
Ta slovenski standard je istoveten z: EN 60745-2-15:2009/A1:2010
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN 60745-2-15:2009/A1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-15:2009/A1:2010

---------------------- Page: 2 ----------------------

SIST EN 60745-2-15:2009/A1:2010

EUROPEAN STANDARD
EN 60745-2-15/A1

NORME EUROPÉENNE
April 2010
EUROPÄISCHE NORM

ICS 25.140.20; 65.060.80


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-15: Particular requirements for hedge trimmers
(IEC 60745-2-15:2006/A1:2009)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge - Sicherheit -
Partie 2-15: Règles particulières Teil 2-15: Besondere Anforderungen
pour les taille-haies für Heckenscheren
(CEI 60745-2-15:2006/A1:2009) (IEC 60745-2-15:2006/A1:2009)




This amendment A1 modifies the European Standard EN 60745-2-15:2009; it was approved by CENELEC on
2010-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-15:2009/A1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-15:2009/A1:2010
EN 60745-2-15:2009/A1:2010 - 2 -
Foreword
The text of document 116/10/FDIS, future amendment 1 to IEC 60745-2-15:2006, prepared by TC 116,
Safety of hand-held motor-operated electric tools,, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as amendment A1 to EN 60745-2-15:2009 on 2010-04-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62841-4-3:2021(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers (IEC 62841-4-3:2020)
EN IEC 62841-4-3:2021

This clause of Part 1 is applicable, except as follows:
Addition:
This document applies to the design of pedestrian controlled walk-behind
– cylinder lawnmowers;
and
– rotary lawnmowers equipped with
– metallic cutting means; and/or
– rigid non-metallic cutting means; and/or
– non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to
achieve cutting, and have a kinetic energy for each single cutting element of greater than 10 J.
NOTE 101 Machines that have non-metallic cutting means and a kinetic energy for each single cutting element
of less than or equal to 10 J are considered to be lawn trimmers.
This document does not apply to
– robotic lawnmowers;
– remote-controlled lawnmowers;
– flail mowers or flail-type attachments;
– scissors type lawnmowers;
– grassland mowers;
– sickle bar mowers;
– towed/semi-mounted grass-cutting machines;
– scrub-clearing machines;
– lawn trimmers and lawn edge trimmers;
– lawn edgers;
– grass trimmers;
– brush cutters;
– brush saws;
– agricultural mowers;
– trailing seat/sulky units;
– ride-on machines;
– non-powered lawnmowers;
– combustion engine powered lawnmowers;
– hybrid and fuel cell powered machines and associated charging systems; and
– garden tractors or their attachments.
NOTE 102 Robotic lawnmowers are covered by IEC 60335-2-107, and will be covered by a future part of IEC 62841.
NOTE 103 Lawn trimmers and lawn edge trimmers are covered by IEC 60335-2-91.
NOTE 104 Lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws will be covered by a future part of IEC 62841.
NOTE 105 Lawn edgers will be covered by a future part of IEC 62841.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-3:2021/A11:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
EN IEC 62841-4-3:2021/A11:2021

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2020-07-15: common mod, no xml

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-4-2:2019(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017/COR1:2018)
EN 62841-4-2:2019

IEC 62841-4-2:2017 applies to hand-held hedge trimmers which are designed for use by one operator for trimming hedges and bushes, including extended-reach hedge trimmers with a maximum length of 3,5 m. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This standard is not applicable to hedge trimmers with a rotating blade. This standard is not applicable to scissors type grass shears. This Part 4-2 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-1:2015(Main)
Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General requirements
EN 62841-1:2015

This standard deals with the safety of electric motor-operated or magnetically driven: - hand-held tools (IEC 62841-2); - transportable tools (IEC 62841-3); - lawn and garden machinery (IEC 62841-4). The above listed categories are hereinafter referred to as “tools” or “machines”. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Tools with electric heating elements are within the scope of this standard. Requirements for motors not isolated from the supply, and having basic insulation not designed for the rated voltage of the tools, are given in Annex B. Requirements for rechargeable battery-powered motor-operated or magnetically driven tools and the battery packs for such tools are given in Annex K. Requirements for such tools that are also operated and/or charged directly from the mains or a non-isolated source are given in Annex L. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.

  • Standard
    186 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-1:2015/AC:2015(Corrigendum)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
EN 62841-1:2015/AC:2015

IEC corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-7:2022/AC:2023(Corrigendum)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators (IEC 62841-4-7:2022/COR1:2023)
EN IEC 62841-4-7:2022/AC:2023-05
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-7:2022(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
EN IEC 62841-4-7:2022

IEC 62841-1:2014, Clause 1 is applicable, except as follows:
Addition:
This document applies to pedestrian controlled walk-behind lawn scarifiers and lawn aerators
which are designed for regenerating lawns by combing out materials such as grass, thatch and
moss or cutting vertically into the lawn face using
– metallic tines; and/or
– rigid non-metallic tines
which rotate about a horizontal axis.
This document does not apply to
– pedestrian controlled walk-behind lawnmowers;
– towed/semi-mounted lawn scarifiers and lawn aerators;
– ride-on machines;
– non-powered lawn scarifiers and lawn aerators;
– combustion engine powered lawn scarifiers and lawn aerators;
– plug aerators (corers);
– hybrid and fuel cell powered machines and associated charging systems; and
– garden tractors or their attachments.
NOTE 101 Pedestrian controlled walk-behind lawnmowers are covered by IEC 62841-4-3.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-7:2022/A11:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
EN IEC 62841-4-7:2022/A11:2022

No scope available

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-4-2:2019/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
EN 62841-4-2:2019/A1:2022

No scope available

  • Amendment
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-4-2:2019/A11:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
EN 62841-4-2:2019/A11:2022

2021-04-12: This prAB includes common mods to EN 62841-4-2:2019/A1 (PR=73662)
DOW=DOR+48 months

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day