EN 60745-2-15:2009/A1:2010

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers

Amandma A1:2010 je dodatek k standardu SIST EN 60745-2-15:2009
This clause of Part 1 is applicable, except as follows: : This standard applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades. This standard is not applicable to hedge trimmers with a rotating blade.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-15: Besondere Anforderungen für Heckenscheren

Outils électroportatifs à moteur - Sécurité - Partie 2-15: Règles particulières pour les taille-haies

Električna ročna orodja - Varnost - 2-15. del: Posebne zahteve za škarje za živo mejo - Dopolnilo A1 (IEC 60745-2-15:2006/A1:2009)

Amandma A1:2010 je dodatek k standardu SIST EN 60745-2-15:2009.
Uporablja se ta klavzula prvega dela, razen kot sledi: Ta standard velja za škarje za živo mejo, ki so načrtovane, da jih uporablja en operater za prirezovanje živih meja in grmov, z uporabo enega ali več linearnih recipročnih rezil. Ta standard ne velja za škarje za živo mejo z rotirajočim rezilom.

General Information

• Status: Withdrawn
• Publication Date: 15-Apr-2010
• Withdrawal Date: 31-Mar-2013
• ICS: 25.140.20 - Electric tools
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Jun-2023
• Completion Date: 28-Jun-2023
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 60745-2-15:2009/A1:2010 - Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006/A1:2009)

Relations

• Replaced By: EN 62841-4-2:2019 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
• Effective Date: 30-Jul-2019
• Amends: EN 60745-2-15:2009 - Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2010
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DãNDUMH]DåLYR
PHMR'RSROQLOR$,(&$
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for
hedge trimmers (IEC 60745-2-15:2006/A1:2009)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-15: Besondere
Anforderungen für Heckenscheren (IEC 60745-2-15:2006/A1:2009)
Outils électroportatifs à moteur - Sécurité - Partie 2-15: Règles particulières pour les
taille-haies (CEI 60745-2-15:2006/A1:2009)
Ta slovenski standard je istoveten z: EN 60745-2-15:2009/A1:2010
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60745-2-15/A1
NORME EUROPÉENNE
April 2010
EUROPÄISCHE NORM
ICS 25.140.20; 65.060.80
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-15: Particular requirements for hedge trimmers
(IEC 60745-2-15:2006/A1:2009)
Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge - Sicherheit -
Partie 2-15: Règles particulières Teil 2-15: Besondere Anforderungen
pour les taille-haies für Heckenscheren
(CEI 60745-2-15:2006/A1:2009) (IEC 60745-2-15:2006/A1:2009)

This amendment A1 modifies the European Standard EN 60745-2-15:2009; it was approved by CENELEC on
2010-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-15:2009/A1:2010 E

Foreword
The text of document 116/10/FDIS, future amendment 1 to IEC 60745-2-15:2006, prepared by TC 116,
Safety of hand-held motor-operated electric tools,, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as amendment A1 to EN 60745-2-15:2009 on 2010-04-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following
...