SIST EN 62841-4-2:2019/A11:2022
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
2021-04-12: This prAB includes common mods to EN 62841-4-2:2019/A1 (PR=73662)
DOW=DOR+48 months
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-2: Besondere Anforderungen für Heckenscheren
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-2: Exigences particulières pour les taille-haies
No scope available
Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-2. del: Posebne zahteve za škarje za živo mejo - Dopolnilo A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62841-4-2:2019/A11:2022
01-september-2022
Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost
- 4-2. del: Posebne zahteve za škarje za živo mejo - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 4-2: Besondere Anforderungen für
Heckenscheren
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 4-2: Exigences particulières pour les taille-haies
Ta slovenski standard je istoveten z: EN 62841-4-2:2019/A11:2022
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN 62841-4-2:2019/A11:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62841-4-2:2019/A11:2022
---------------------- Page: 2 ----------------------
SIST EN 62841-4-2:2019/A11:2022
EUROPEAN STANDARD EN 62841-4-2:2019/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2022
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-2: Particular
requirements for hedge trimmers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 4-2: Exigences transportable Werkzeuge und Rasen- und
particulières pour les taille-haies Gartenmaschinen - Sicherheit - Teil 4-2: Besondere
Anforderungen für Heckenscheren
This amendment A11 modifies the European Standard EN 62841-4-2:2019; it was approved by CENELEC on 2022-05-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-4-2:2019/A11:2022 E
---------------------- Page: 3 ----------------------
SIST EN 62841-4-2:2019/A11:2022
EN 62841-4-2:2019/A11:2022 (E)
European foreword
This document (EN 62841-4-2:2019/A11:2022) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-05-30
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2026-05-30
conflicting with this document have to be
withdrawn
This document amends EN 62841-4-2:2019/A1:2022.
EN 62841-4-2:2019/A1:2022 introduces various clarifications and corrections to different clauses, in
particular for the moisture resistance of hedge trimmers. In addition, corrections to the noise test code are
made.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s) see informative Annex ZZ, which is an integral part
of this document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
2
---------------------- Page: 4 ----------------------
SIST EN 62841-4-2:2019/A11:2022
EN 62841-4-2:2019/A11:2022 (E)
1 Modification to Clause 1, “Scope”
Add the following to the existing Clause 1:
“This document covers all significant hazards, hazardous situations or hazardous events relevant for
machines covered by this document.
NOTE Z101 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the
corresponding hazards are either not relevant for machines covered by this document or do not require specific action
by the designer.”
2 Modification to Clause 19, “Mechanical hazards”
Replace the existing Subclause 19.102.2.1 with the following:
“19.102.2.1 The front handle shall be located so that the distance from the nearest cutting edge of the
cutter blade to the rear side of any handle, except for Category 1, is not less than 120 mm as shown in
Figure 108 a) and Figure 108 b).
For Category 1, the shortest distance between the front of the handle grip and the nearest blade tooth
shall be at least 120 mm (see Figure 111). The distances shall be measured along the shortest path from
the front of the handle grip to the nearest cutting edge of the cutter blade.
For all categories in Table 101, if there is a front hand barrier, then the x and x distances in Figure 108 a)
1 2
and Figure 108 b) shall be measured along the shortest path from the backside of the handle, via the edge
of the front hand barrier, to the nearest cutting edge of the cutter blade. The front hand barrier shall not
have any openings with a minor dimension larger than 10 mm.
Compliance is checked by inspection and by measurement.”
3
---------------------- Page: 5 ----------------------
SIST EN 62841-4-2:2019/A11:2022
EN 62841-4-2:2019/A11:2022 (E)
3 Replacement of the Annex ZA, “Normative references to international
publications with their corresponding European publications”
Replace the existing Annex ZA with the following:
“
Annex ZA
(normative)
Normative references to international publications with their
corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Annex ZA of EN 62841-1:2015 is applicable, except as follows:
Publication Year Title EN/HD Year
Addition:
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems – Part 3:
Use of coating, potting or moulding for
protection against pollution
IEC 60664-4 - Insulation coordination for equipment EN 60664-4 2006
within low-voltage systems – Part 4:
Consideration of high-frequency voltage
stress
+ AC 2006
IEC 61672-1 - Electroacoustics – Sound level meters – EN 61672-1 2013
Part 1: Specifications
ISO 354 2003 Acoustics – Me
...
SLOVENSKI STANDARD
SIST EN 62841-4-2:2019/oprAA:2021
01-julij-2021
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
2. del: Posebne zahteve za škarje za živo mejo - Dopolnilo AA
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 4-2: Besondere Anforderungen für
Heckenscheren
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 4-2: Exigences particulières pour les taille-haies
Ta slovenski standard je istoveten z: EN 62841-4-2:2019/prAA
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN 62841-4-2:2019/oprAA:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62841-4-2:2019/oprAA:2021
---------------------- Page: 2 ----------------------
SIST EN 62841-4-2:2019/oprAA:2021
EUROPEAN STANDARD DRAFT
EN 62841-4-2:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
April 2021
ICS
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-2: Particular
requirements for hedge trimmers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 4-2: Exigences transportable Werkzeuge und Rasen- und
particulières pour les taille-haies Gartenmaschinen - Sicherheit - Teil 4-2: Besondere
Anforderungen für Heckenscheren
This draft amendment prAA, if approved, will modify the European Standard EN 62841-4-2:2019; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2021-07-23.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 73807 Ref. No. EN 62841-4-2:2019/prAA E
---------------------- Page: 3 ----------------------
SIST EN 62841-4-2:2019/oprAA:2021
EN 62841-4-2:2019/prAA:2021 (E)
1 European foreword
2 This document (EN 62841-4-2:2019/prAA:2021) has been prepared by CLC/TC 116 “Safety and
3 environmental aspects of motor-operated electric tools”.
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 48 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6 This document will amend EN IEC 62841-4-2:2018/prA1:2021.
7 This document has been prepared under a mandate given to CENELEC by the European Commission and
8 the European Free Trade Association, and supports essential requirements of EU Directive(s).
9 For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
10 document.
2
---------------------- Page: 4 ----------------------
SIST EN 62841-4-2:2019/oprAA:2021
EN 62841-4-2:2019/prAA:2021 (E)
11 1 Modification to Clause 1, “Scope”
12 Add the following to the existing Clause 1:
13 “This document covers all significant hazards, hazardous situations or hazardous events relevant for
14 machines covered by this document.
15 NOTE Z101 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the
16 corresponding hazards are either not relevant for machines covered by this document or do not require specific action
17 by the designer.”
18 2 Modification to Clause 19, “Mechanical hazards”
19 Replace the existing Subclause 19.102.2.1 with the following:
20 “19.102.2.1 The front handle shall be located so that the distance from the nearest cutting edge of the
21 cutter blade to the rear side of any handle, except for Category 1, is not less than 120 mm as shown in
22 Figure 108.
23 For Category 1, the shortest distance between the front of the handle grip and the nearest blade tooth
24 shall be at least 120 mm (see Figure 111). The distances shall be measured along the shortest path from
25 the front of the handle grip to the nearest cutting edge of the cutter blade.
26 For all categories in Table 101, if there is a front hand barrier, then the x and x distances in Figure 108
1 2
27 shall be measured along the shortest path from the backside of the handle, via the edge of the front hand
28 barrier, to the nearest cutting edge of the cutter blade. The front hand barrier shall not have any openings
29 with a minor dimension larger than 10 mm.
30 Compliance is checked by inspection and by measurement.”
31 3 Replacement of the Annex ZA, “Normative references to international
32 publications with their corresponding European publications”
33 Replace the existing Annex ZA with the following:
34 “Annex ZA
35 (normative)
36
37 Normative references to international publications with their corresponding European
38 publications
39 The following documents are referred to in the text in such a way that some or all of their content constitutes
40 requirements of this document. For dated references, only the edition cited applies. For undated references,
41 the latest edition of the referenced document (including any amendments) applies.
42 NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the
43 relevant EN/HD applies.
44 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
45 here: www.cenelec.eu.
46 Annex ZA of EN 62841-1:2015 is applicable, except as follows:
Publication Year Title EN/HD Year
Addition:
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems - Part 3: Use
3
---------------------- Page: 5 ----------------------
SIST EN 62841-4-2:2019/oprAA:2021
EN 62841-4-2:2019/prAA:2021 (E)
Publication Year Title EN/HD Year
of coating, potting or moulding for
protection against pollution
IEC 60664-4 - Insulation coordination for equipment EN 60664-4 2006
within low-voltage systems - Part 4:
Consideration of high-frequency voltage
stress
IEC 61672-1 - Electroacoustics – Sound level meters – EN 61672-1 2013
Part 1: Specification
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.