SIST EN 4263:2014

Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa

This standard specifies the requirements relating to:
Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20)
As forged
Forging stock
a or D  200 mm
690 MPa  Rm  960 MPa
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA4901 (X12CrNiCoMoW21-20) - Nicht wärmebehandelt — Schmiedevormaterial - a oder D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa

Diese Norm legt die Anforderungen an
Hochwarmfeste Legierung FE-PA4901 (X12CrNiCoMoW21-20) Nicht wärmebehandelt Schmiedevormaterial a oder D ≤ 200 mm 690 MPa ≤ Rm ≤ 960 MPa
zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud FE-PA4901 (X12CrNiCoMoW21-20) - Non traité - Produits destinés à la forge - a ou D ≤ 200mm - 690 MPa ≤ Rm ≤ 960MPa

Cette Norme européenne spécifie les exigences relatives à :
Alliage résistant à chaud FE-PA4901 (X12CrNiCoMoW21-20)
Non traité
Produits destinés à la forge
a ou D  200 mm
690 MPa  Rm  960 MPa
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina FE-PA4901 (X12CrNiCoMoW21-20) - Toplotno neobdelana (nekovana) - Kovni material - a ali D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa

General Information

• Status: Published
• Publication Date: 10-Feb-2014
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Dec-2013
• Due Date: 27-Feb-2014
• Completion Date: 11-Feb-2014
• Ref Project: EN 4263:2013 - Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa

Relations

• Revised: SIST EN 4163:2010 - Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - 1100 MPa (at ambient temperature)/235 °C
• Effective Date: 01-Mar-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 4263:2013SIST EN 4263:2014en01-marec-2014SIST EN 4263:2014SLOVENSKI
STANDARD



SIST EN 4263:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4263
July 2013 ICS 49.025.01 English Version
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa
Série aérospatiale - Alliage résistant à chaud FE-PA4901 (X12CrNiCoMoW21-20) - Non traité - Produits destinés à la forge - a ou D ≤ 200mm - 690 MPa ≤ Rm ≤ 960MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA4901 (X12CrNiCoMoW21-20) - Nicht wärmebehandelt - Schmiedevormaterial - a oder D ≤ 200 mm - 690 MPa ≤ Rm≤ 960 MPa This European Standard was approved by CEN on 8 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4263:2013: ESIST EN 4263:2014



EN 4263:2013 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5
SIST EN 4263:2014



EN 4263:2013 (E) 3 Foreword This document (EN 4263:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CE
...