iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60143-1:2002

(Main)

Series capacitors for power systems -- Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation

Series capacitors for power systems -- Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation

Applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. The series capacitor units and banks are usually intended for high voltage power systems. This standard is applicable to the complete voltage range. Note:For internal fuses for series capacitors, see EN 60595.

Reihenkondensatoren für Starkstromanlagen -- Teil 1: Allgemeines - Betriebsverhalten, Prüfen und Bemessen - Sicherheitsanforderungen - Richtlinie zum Errichten

Condensateurs série destinés à être installés sur des réseaux -- Partie 1: Généralités - Caractéristiques fonctionnelles, essais et valeurs assignées - Règles de sécurité - Guide d'installation et d'exploitation

S'applique aux condensateurs unitaires et aux batteries de condensateurs destinés à être raccordés en série sur une ligne de transport ou de distribution d'énergie faisant partie d'un réseau alternatif de fréquence comprise entre 15 Hz et 60 Hz. Les condensateurs série et les batteries de condensateurs série sont habituellement destinés aux réseaux d'énergie à haute tension. Cette norme s'applique à toute la gamme de tensions. Pour les fusibles internes de condensateurs en série voir la EN 60595.

Series capacitors for power systems - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation

General Information

Status
Withdrawn
Publication Date
30-Apr-2002
Withdrawal Date
23-Oct-2016
ICS
31.060.70 - Power capacitors
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
24-Oct-2016
Due Date
16-Nov-2016
Completion Date
24-Oct-2016
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60143-1:1993 - Series capacitors for power systems - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation

Relations

Replaced By
SIST EN 60143-1:2004 - Series capacitors for power systems -- Part 1: General
Effective Date
06-May-2014
Replaced By
SIST EN 60143-1:2004 - Series capacitors for power systems -- Part 1: General
Effective Date
29-Jan-2023
Replaced By
SIST EN 60143-1:2004 - Series capacitors for power systems -- Part 1: General
Effective Date
07-Jun-2022

Buy Standard

EN 60143-1:2002EN 60143-1:2002
PreviousNext
Standard
EN 60143-1:2002
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60143-1:2002
01-maj-2002
Series capacitors for power systems - Part 1: General - Performance, testing and
rating - Safety requirements - Guide for installation
Series capacitors for power systems -- Part 1: General - Performance, testing and rating
- Safety requirements - Guide for installation
Reihenkondensatoren für Starkstromanlagen -- Teil 1: Allgemeines - Betriebsverhalten,
Prüfen und Bemessen - Sicherheitsanforderungen - Richtlinie zum Errichten
Condensateurs série destinés à être installés sur des réseaux -- Partie 1: Généralités -
Caractéristiques fonctionnelles, essais et valeurs assignées - Règles de sécurité - Guide
d'installation et d'exploitation
Ta slovenski standard je istoveten z: EN 60143-1:1993
ICS:
31.060.70 0RþQRVWQLNRQGHQ]DWRUML Power capacitors
SIST EN 60143-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 2 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 3 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 4 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 5 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 6 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 7 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 8 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 9 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 10 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 11 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 12 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 13 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 14 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 15 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 16 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 17 ----------------------

SIST EN 60143-1:2002

---------------------- Page: 18 ----------------------

SIST EN 60143-1:2002

-----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62146-2:2023(Main)
Capacitors for high‑voltage alternating current circuit‑breakers - Part 2: TRV capacitors (IEC 62146-2:2023)
EN IEC 62146-2:2023

IEC 62146-2:2023 is applicable to TRV capacitors used on high-voltage alternating current circuit-breakers with rated voltages above 100 kV with 50 Hz or 60 Hz.
TRV capacitors are installed phase to earth, either in parallel to the bushing on dead tank circuit-breakers, or immersed inside the circuit-breaker, or freestanding close to the circuit-breaker. Their function is to limit the transient recovery voltage (TRV) and the rate of rise of recovery voltage (RRRV) on the circuit-breaker. Capacitors in compliance with this document can be used as TRV capacitor.
This document applies to TRV capacitors falling into one or both of the following categories for:
- mounting on or close to air insulated switchgear (AIS) dead tank and live tank circuit-breakers, or
- mounting on gas insulated switchgear (GIS) circuit-breakers.
The testing for each of the above applications is in some cases different.
This document does not apply to grading capacitors installed in parallel to the chambers of the circuit-breaker, which are specified in IEC 62146-1.
This document does not apply to capacitors not directly associated with high-voltage alternating current circuit-breakers.
The object of this document is:
- to define uniform rules regarding performances, testing and rating
- to define specific safety rules
- to provide a guidance for installation and operation
The TRV capacitor is a sub-component for the circuit-breaker and is specified in accordance with the circuit-breaker specifications according to IEC 62271-1, IEC 62271-100, and if applicable to IEC 62271-203.
TRV capacitors are commonly built with composite or ceramic housings (insulators). Those insulators follow IEC 61462 or IEC 62155. Other housings can be used if they can sustain applicable type tests according to IEC 61462 and IEC 62155.
This International Standard is to be used in conjunction with IEC 62146-1:2013 and IEC 62146-1:2013/AMD1:2016.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63210:2021(Main)
Shunt power capacitors of the self-healing type for AC systems having a rated voltage above 1 000 V (IEC 63210:2021)
EN IEC 63210:2021

This document is applicable to both self-healing capacitor units and self-healing capacitor banks
intended to be used, particularly, for power-factor correction of AC power systems having a
rated voltage above 1 000 V and fundamental frequencies of 15 Hz to 60 Hz.
The following capacitors are excluded from this document:
– shunt power capacitors of the self-healing type for AC systems having a rated voltage up to
and including 1 000 V (IEC 60831-1, -2);
– shunt power capacitors of the non-self-healing type for AC systems having a rated voltage
up to and including 1 000 V (IEC 60931-1, -2 and -3);
– shunt capacitors of the non-self-healing type for AC power systems having a rated voltage
above 1 000 V (IEC 60871-1, -2, -3 and -4);
– capacitors for inductive heat-generating plants operating at frequencies between 40 Hz and
24 000 Hz (IEC 60110-1 and -2);
– series capacitors (IEC 60143-1, -2, -3 and -4);
– AC motor capacitors (IEC 60252-1 and -2);
– coupling capacitors and capacitor dividers (IEC 60358-1, -2, -3, -4);
– capacitors for power electronic circuits (IEC 61071);
– small AC capacitors to be used for fluorescent and discharge lamps (IEC 61048 and
IEC 61049);
– capacitors for suppression of radio interference;
– capacitors intended to be used in various types of electrical equipment, and thus considered
as components;
– capacitors intended for use with DC voltage superimposed on the AC voltage.
Requirements for accessories such as insulators, switches, instrument transformers and
external fuses are given in the relevant IEC standards and are not covered by the scope of this
document.
The object of this document is to:
a) formulate uniform rules regarding performances, testing and rating;
b) formulate specific safety rules;
c) provide a guide for installation and operation.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60143-1:2015/AC:2017(Corrigendum)
Series capacitors for power systems - Part 1: General (IEC 60143-1:2015/COR1:2017)
EN 60143-1:2015/AC:2017-05
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62146-1:2014/A1:2016(Amendment)
Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013/A1:2016)
EN 62146-1:2014/A1:2016
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60143-3:2015(Main)
Series capacitors for power systems - Part 3: Internal fuses
EN 60143-3:2015

This part of IEC 60143 applies to internal fuses designed to isolate faulty capacitor elements,
to allow operation of the remaining parts of that capacitor unit and the bank in which the
capacitor unit is connected. Such fuses are not a substitute for a switching device such as a
circuit-breaker, or for external protection of the capacitor bank, or any part thereof.
The object of this part of IEC 60143 is:
– to formulate requirements regarding performance and testing;
– to provide a guide for coordination of fuse and bank protection.
NOTE External fuses for series capacitors are treated in IEC 60143-1:2004, Annex A: "Test requirements and
application guide for external fuses and units to be externally fused".

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60143-1:2015(Main)
Series capacitors for power systems - Part 1: General
EN 60143-1:2015

This part of IEC 60143 applies both to capacitor units and capacitor banks intended to be
used connected in series with an a.c. transmission or distribution line or circuit forming part
of an a.c. power system having a frequency of 15 Hz to 60 Hz.
The primary focus of this standard is on transmission application.
The series capacitor units and banks are usually intended for high-voltage power systems.
This standard is applicable to the complete voltage range.
This standard does not apply to capacitors of the self-healing metallized dielectric type.
The following capacitors, even if connected in series with a circuit, are excluded from this
standard:
– capacitors for inductive heat-generating plants (IEC 60110-1);
– capacitors for motor applications and the like (IEC 60252 (all parts));
– capacitors to be used in power electronics circuits (IEC 61071);
– capacitors for discharge lamps (IEC 61048 and IEC 61049).
For standard types of accessories such as insulators, switches, instrument transformers,
external fuses, etc. see the pertinent IEC standard.
NOTE 1 Additional requirements for capacitors to be protected by internal fuses, as well as the requirements for
internal fuses, are found in IEC 60143-3. See also Annex C.
NOTE 2 Additional requirements for capacitors to be protected by external fuses, as well as the requirements for
external fuses, are found in Annex A and Annex C.
NOTE 3 A separate standard for series capacitor accessories (spark-gaps, varistors, discharge reactors, currentlimiting
damping reactors, damping resistors, circuit-breakers, etc.), IEC 60143-2, has been revised and was
completed in 2012. A separate standard for internal fuses for series capacitors, IEC 60143-3 has been revised and
was completed in 2013.
NOTE 4 Some information regarding fuseless capacitor units and fuseless capacitor banks is found in Annex C.
The object of this standard is:
– to formulate uniform rules regarding performance, testing and rating;
– to formulate specific safety rules;
– to serve as a guide for installation and operation.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60831-1:2015/AC:2015(Corrigendum)
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
EN 60831-1:2014/AC:2014
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60831-1:2015(Main)
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
EN 60831-1:2014

This part of the IEC 60831 series is applicable to both capacitor units and capacitor banks
intended to be used, particularly, for power-factor correction of a.c. power systems having a
rated voltage up to and including 1 000 V and frequencies of 15 Hz to 60 Hz.
This part of IEC 60831 also applies to capacitors intended for use in power filter circuits.
Additional definitions, requirements, and tests for power filter capacitors are given in Annex A.
The following capacitors are excluded from this part of IEC 60831:
– Shunt power capacitors of the non-self-healing type for a.c. systems having a rated
voltage up to and including 1 000 V (IEC 60931-, -2 and -3).
– Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V
(IEC 60871-1, -2, -3 and -4).
– Capacitors for inductive heat-generating plants operating at frequencies between 40 Hz
and 24 000 Hz (IEC 60110-1 and -2)
– Series capacitors (IEC60143-1, -2, -3 and -4)
– AC motor capacitors (IEC 60252-1 and -2)
– Coupling capacitors and capacitor dividers (IEC 60358-1)
– Capacitors for power electronic circuits (IEC 61071).
– Small a.c. capacitors to be used for fluorescent and discharge lamps (IEC 61048 and
IEC 61049).
– Capacitors for suppression of radio interference (under consideration).
– Capacitors intended to be used in various types of electrical equipment, and thus
considered as components.
– Capacitors intended for use with d.c. voltage superimposed on the a.c. voltage.
Accessories such as insulators, switches, instrument transformers, fuses, etc., should be in
accordance with the relevant IEC standards and are not covered by the scope of this part of
IEC 60831.
The object of this part of IEC 60831 is to:
a) formulate uniform rules regarding performances, testing and rating;
b) formulate specific safety rules;
c) provide a guide for installation and operation.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60871-1:2014(Main)
Shunt capacitors for A.C. power systems having a rated voltage above 1000 V - Part 1: General
EN 60871-1:2014

EN IEC 60871-1 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60 Hz. This part of IEC 60871 also applies to capacitors intended for use in power filter circuits. Additional definitions, requirements and tests for filter capacitors are given in Annex B. Additional requirements for capacitors protected by internal fuses as well as requirements for the internal fuses are given in IEC 60871-4. Requirements for capacitors to be protected by external fuses, as well as requirements for the same, are given in Annex C. This standard does not apply to capacitors of the self-healing metallized dielectric type. The following capacitors are excluded from this part of IEC 60871: - capacitors for inductive heat-generating plants operating at frequencies between 40 Hz and 24 000 Hz (IEC 60110-1); - series capacitors for power systems (see the IEC 60143 series); - capacitors for motor applications and the like (see the IEC 60252 series); - coupling capacitors and capacitor dividers (IEC 60358); - shunt capacitors for a.c. power systems having rated voltage up to and including 1 000 V (see the IEC 60831 and IEC 60931 series); - small a.c. capacitors to be used for fluorescent and discharge lamps (IEC 61048 and IEC 61049); - capacitors to be used in power electronic circuits (IEC 61071); - capacitors for microwave ovens (IEC 61270-1); - capacitors for suppression of radio interference; - capacitors intended for use with a.c. voltage superimposed on d.c. voltage. Accessories such as insulators, switches, instrument transformers, external fuses, etc. are in accordance with the relevant IEC standards. The object of this part of IEC 60871 is as follows: a) to formulate uniform rules regarding the performance and rating of units and banks, and the testing of units; b) to formulate specific safety rules; c) to provide a guide for installation and operation.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60871-4:2014(Main)
Shunt capacitors for A.C. power systems having a rated voltage above 1000 V - Part 4: Internal fuses
EN 60871-4:2014

EN IEC 60871-4 applies to internal fuses which are designed to isolate faulty capacitor elements, in order to allow operation of the remaining parts of that capacitor unit and the bank in which the capacitor unit is connected. Such fuses are not a substitute for a switching device such as a circuit-breaker, or for external protection of the capacitor bank or any part thereof. The object of this part of IEC 60871 is to formulate requirements regarding performance and testing and to provide a guide for coordination of fuse protection.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day