SIST EN 301 908-16 V4.2.1:2010
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 16: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 16: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive
The present document applies to the following radio equipment types:
User Equipment (also denoted as Mobile Stations or Access Terminals) for Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) compliant with TIA-1121.001 [3]. These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
The present document covers requirements for UMB User Equipment. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 16. del: Harmonizirani EN za IMT-2000, razvito CDMA z več nosilnimi frekvencami (“Multi-Carrier”) pri ultra mobilni širokopasovnosti (UMB) (UE), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Pričujoči dokument velja za naslednje vrste radijske opreme:
uporabniško opremo (označeno tudi kot mobilne postaje ali dostopni terminali) za razviti CDMA z več nosilnimi frekvencami »Multi-Carrier« pri ultramobilni širokopasovnosti, ki je v skladu z TIA-1211.001 [3]. Te vrste radijske opreme so zmožne delovanja v vseh ali katerem koli delu frekvenčnega pasu, kot so navedeni v tabeli 1-1.
Pričujoči dokument zajema zahteve za UMB uporabniško opremo. Pričujoči dokument je namenjen temu, da zajema določbe Direktive 1999/5/EC (direktive R&TTE) [i.2], člena 3.2, ki navaja, da » … je radijska oprema narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«. Poleg pričujočega dokumenta, se ostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 direktive R&TTE [i.2], lahko uporabljajo za opremo znotraj področja uporabe pričujočega dokumenta.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OQL577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 16: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-16 Version 4.2.1SIST EN 301 908-16 V4.2.1:2010en01-maj-2010SIST EN 301 908-16 V4.2.1:2010SLOVENSKI
STANDARD
SIST EN 301 908-16 V4.2.1:2010
ETSI EN 301 908-16 V4.2.1 (2010-03)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Base Stations (BS), Repeaters and User Equipment (UE)for IMT-2000 Third-Generation cellular networks;Part 16: Harmonized EN for IMT-2000,Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE)covering the essential requirementsof article 3.2 of the R&TTE Directive SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)2
Reference DEN/ERM-TFES-002-16 Keywords 3G, 3GPP2, cdma2000, cellular, digital, IMT-2000, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)3 Contents Intellectual Property Rights . 5 Foreword . 5 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 8 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 10 3.3 Abbreviations . 11 4 Technical requirements specifications . 11 4.1 Environmental profile . 11 4.2 Conformance requirements . 12 4.2.1 Introduction. 12 4.2.2 Conducted spurious emissions when transmitting . 12 4.2.2.1 Definition . 12 4.2.2.2 Limits . 12 4.2.2.3 Conformance . 14 4.2.3 Transmitter maximum output power. 14 4.2.3.1 Definition . 14 4.2.3.2 Limits . 14 4.2.3.3 Conformance . 14 4.2.4 Minimum controlled output power . 14 4.2.4.1 Definition . 14 4.2.4.2 Limits . 14 4.2.4.3 Conformance . 14 4.2.5 Conducted spurious emissions when not transmitting . 14 4.2.5.1 Definition . 14 4.2.5.2 Limits . 15 4.2.5.3 Conformance . 15 4.2.6 Receiver Blocking characteristics . 15 4.2.6.1 Definition . 15 4.2.6.2 Limits . 16 4.2.6.3 Conformance . 17 4.2.7 Intermodulation spurious response attenuation . 17 4.2.7.1 Definition . 17 4.2.7.2 Limits . 17 4.2.7.3 Conformance . 18 4.2.8 Receiver Adjacent Channel Selectivity (ACS) . 18 4.2.8.1 Definition . 18 4.2.8.2 Limits . 18 4.2.8.3 Conformance . 19 5 Testing for compliance with technical requirements . 19 5.1 Environmental conditions for testing . 19 5.2 Interpretation of the measurement results . 19 5.3 Essential radio test suites . 20 5.3.1 Conducted spurious emissions when transmitting . 20 5.3.2 Transmitter maximum output power. 20 5.3.3 Minimum controlled output power . 21 5.3.4 Conducted spurious emissions when not transmitting . 21 5.3.5 Receiver Blocking characteristics . 21 5.3.6 Intermodulation spurious response attenuation . 22 SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)4 5.3.7 Receiver Adjacent Channel Selectivity (ACS) . 22 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 24 Annex B (normative): Mobile Station configurations . 26 B.1 Transmission configurations . 26 B.2 Common Procedures . 26 B.2.1 MAC and Physical Layer Configuration . 26 B.2.2 Forward and Reverse Channels and Link Assignment Block (LAB) Assignments . 26 B.2.2.1 Forward Link PER Measurement Test. 26 B.2.2.2 Emissions Test . 27 B.2.3 Session and Test Application Configurations. 27 B.2.3.1 Forward Link PER Measurement . 27 B.2.3.2 Emissions Test . 27 Annex C (normative): Environmental profile . 28 C.1 Introduction . 28 C.2 Temperature and Power Supply Voltage . 28 C.3 High Humidity . 28 C.4 Vibration Stability . 28 C.5 Shock Stability . 28 Annex D (normative): Standard Test Conditions . 29 D.1 Standard Equipment . 29 D.1.1 Basic Equipment . 29 D.1.2 Associated Equipment . 29 D.2 Standard Environmental Test Conditions . 29 D.3 Standard Conditions for the Primary Power Supply . 29 D.3.1 General . 29 D.3.2 Standard DC Test Voltage from Accumulator Batteries . 29 D.3.3 Standard AC Voltage and Frequency . 30 D.4 Standard Test Equipment . 30 D.4.1 Access Network Simulator . 30 D.4.2 AWGN Generator. 30 D.4.3 CW Generator . 30 D.4.4 Spectrum Analyzer . 31 D.4.5 Average Power Meter . 32 D.5 Functional System Setups . 32 D.5.1 Functional Block Diagrams . 32 D.6 Error Rates Measurement . 34 D.6.1 Forward Traffic Channel PER . 34 D.7 Confidence Interval . 35 D.7.1 Confidence Level of Error Rate . 35 D.7.2 Confidence level of Detection Time . 37 Annex E (informative): The EN title in the official languages . 38 Annex F (informative): Bibliography . 39 History . 40
SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A. The present document is part 16 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below: Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)6 Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 13: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 14: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 15: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 16: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 17: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 19 February 2010 Date of latest announcement of this EN (doa): 31 May 2010 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2010 Date of withdrawal of any conflicting National Standard (dow): 30 November 2011
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)7 1 Scope The present document applies to the following radio equipment types: • User Equipment (also denoted as Mobile Stations or Access Terminals) for Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) compliant with TIA-1121.001 [3]. These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: UMB mobile station operating bands Band Class (BC) Direction of transmission UMB mobile station operating bands 6 Transmit
1 920 MHz to 1 980 MHz
Receive
2 110 MHz to 2 170 MHz 8 Transmit 1 710 MHz to 1 785 MHz
Receive
1 805 MHz to 1 880 MHz 9 Transmit
880 MHz to 915 MHz
Receive
925 MHz to 960 MHz 13 Transmit
2 500 MHz to 2 570 MHz
Receive
2 620 MHz to 2 690 MHz
The present document covers requirements for UMB User Equipment. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2, which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)8 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI EN 301 908-1 (V4.1.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering the essential requirements of article 3.2 of the R&TTE Directive". [2] 3GPP2 C.S0089-0 Version 1.0, (March 2009): "Recommended Minimum Performance Standards for cdma2000 Ultra Mobile Broadband Access Terminal" (to be published as TIA-1171). NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0089_v1.0_AT_MPS_for_UMB-090402.pdf. [3] TIA-1121.001 (December 2007): "Physical Layer for Ultra Mobile Broadband (UMB) Air Interface Specification". [4] 3GPP2 C.S0090-0 Version 1.0, (March 2009): "Test Application Specification for cdma2000 Ultra Mobile Broadband (UMB)" (to be published as TIA-1172). NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0090-0_v1.0_TAS_for_UMB-090402.pdf. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. [i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.3] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive". 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: access network: network equipment providing data connectivity between a packet switched data network (typically the Internet) and the access terminals NOTE: Connectivity is typically provided at the Link Layer (PPP). An access network is equivalent to a Base Station in TIA-1121.001 [3]. In the context of transmitter testing, an access network applies to operation with a single carrier and single sector active only. access terminal: device providing data connectivity to a user NOTE: An access terminal may be connected to a computing device such as a laptop personal computer or may be self-contained data device such as a personal digital assistant. ACK channel: used by the access terminal to inform the access network whether a data packet transmitted on the Forward Traffic Channel has been received successfully or not SIST EN 301 908-16 V4.2.1:2010
ETSI ETSI EN 301 908-16 V4.2.1 (2010-03)9 active set: set of pilots assigned to a particular access terminal adjacent channel leakage power ratio: ratio of the on-channel transmit power to the power measured in one of the adjacent channels with no active channel in the adjacent channel band class: set of frequency channels and a numbering scheme for these channels code division multiple access: technique for sp
...
ETSI EN 301 908-16 V4.2.1 (2010-03)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE)
for IMT-2000 Third-Generation cellular networks;
Part 16: Harmonized EN for IMT-2000,
Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE)
covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-16 V4.2.1 (2010-03)
Reference
DEN/ERM-TFES-002-16
Keywords
3G, 3GPP2, cdma2000, cellular, digital, IMT-
2000, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-16 V4.2.1 (2010-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 12
4.2.1 Introduction. 12
4.2.2 Conducted spurious emissions when transmitting . 12
4.2.2.1 Definition . 12
4.2.2.2 Limits . 12
4.2.2.3 Conformance . 14
4.2.3 Transmitter maximum output power. 14
4.2.3.1 Definition . 14
4.2.3.2 Limits . 14
4.2.3.3 Conformance . 14
4.2.4 Minimum controlled output power . 14
4.2.4.1 Definition . 14
4.2.4.2 Limits . 14
4.2.4.3 Conformance . 14
4.2.5 Conducted spurious emissions when not transmitting . 14
4.2.5.1 Definition . 14
4.2.5.2 Limits . 15
4.2.5.3 Conformance . 15
4.2.6 Receiver Blocking characteristics . 15
4.2.6.1 Definition . 15
4.2.6.2 Limits . 16
4.2.6.3 Conformance . 17
4.2.7 Intermodulation spurious response attenuation . 17
4.2.7.1 Definition . 17
4.2.7.2 Limits . 17
4.2.7.3 Conformance . 18
4.2.8 Receiver Adjacent Channel Selectivity (ACS) . 18
4.2.8.1 Definition . 18
4.2.8.2 Limits . 18
4.2.8.3 Conformance . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Interpretation of the measurement results . 19
5.3 Essential radio test suites . 20
5.3.1 Conducted spurious emissions when transmitting . 20
5.3.2 Transmitter maximum output power. 20
5.3.3 Minimum controlled output power . 21
5.3.4 Conducted spurious emissions when not transmitting . 21
5.3.5 Receiver Blocking characteristics . 21
5.3.6 Intermodulation spurious response attenuation . 22
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-16 V4.2.1 (2010-03)
5.3.7 Receiver Adjacent Channel Selectivity (ACS) . 22
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 24
Annex B (normative): Mobile Station configurations . 26
B.1 Transmission configurations . 26
B.2 Common Procedures . 26
B.2.1 MAC and Physical Layer Configuration . 26
B.2.2 Forward and Reverse Channels and Link Assignment Block (LAB) Assignments . 26
B.2.2.1 Forward Link PER Measurement Test. 26
B.2.2.2 Emissions Test . 27
B.2.3 Session and Test Application Configurations. 27
B.2.3.1 Forward Link PER Measurement . 27
B.2.3.2 Emissions Test . 27
Annex C (normative): Environmental profile . 28
C.1 Introduction . 28
C.2 Temperature and Power Supply Voltage . 28
C.3 High Humidity . 28
C.4 Vibration Stability . 28
C.5 Shock Stability . 28
Annex D (normative): Standard Test Conditions . 29
D.1 Standard Equipment . . 29
D.1.1 Basic Equipment . 29
D.1.2 Associated Equipment . 29
D.2 Standard Environmental Test Conditions . 29
D.3 Standard Conditions for the Primary Power Supply . 29
D.3.1 General . 29
D.3.2 Standard DC Test Voltage from Accumulator Batteries . 29
D.3.3 Standard AC Voltage and Frequency . 30
D.4 Standard Test Equipment . 30
D.4.1 Access Network Simulator . 30
D.4.2 AWGN Generator. 30
D.4.3 CW Generator . 30
D.4.4 Spectrum Analyzer . 31
D.4.5 Average Power Meter . 32
D.5 Functional System Setups . 32
D.5.1 Functional Block Diagrams . 32
D.6 Error Rates Measurement . 34
D.6.1 Forward Traffic Channel PER . 34
D.7 Confidence Interval . 35
D.7.1 Confidence Level of Error Rate . 35
D.7.2 Confidence level of Detection Time . 37
Annex E (informative): The EN title in the official languages . 38
Annex F (informative): Bibliography . 39
History . 40
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-16 V4.2.1 (2010-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
The present document is part 16 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (UE) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (BS) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE
Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE
Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (UE) covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (BS) covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 908-16 V4.2.1 (2010-03)
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (Repeaters)
covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 13: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (UE) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 14: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (BS) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 15: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD
Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 16: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB)
(UE) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 17: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS)
covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 19 February 2010
Date of latest announcement of this EN (doa): 31 May 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2010
Date of withdrawal of any conflicting National Standard (dow): 30 November 2011
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 908-16 V4.2.1 (2010-03)
1 Scope
The present document applies to the following radio equipment types:
• User Equipment (also denoted as Mobile Stations or Access Terminals) for Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) compliant with TIA-1121.001 [3].
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
Table 1-1: UMB mobile station operating bands
Band Class (BC) Direction of transmission UMB mobile station operating
bands
Transmit 1 920 MHz to 1 980 MHz
6
Receive 2 110 MHz to 2 170 MHz
Transmit 1 710 MHz to 1 785 MHz
8
Receive 1 805 MHz to 1 880 MHz
Transmit 880 MHz to 915 MHz
9
Receive 925 MHz to 960 MHz
Transmit 2 500 MHz to 2 570 MHz
13
Receive 2 620 MHz to 2 690 MHz
The present document covers requirements for UMB User Equipment.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 301 908-16 V4.2.1 (2010-03)
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 908-1 (V4.1.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular
networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements,
covering the essential requirements of article 3.2 of the R&TTE Directive".
[2] 3GPP2 C.S0089-0 Version 1.0, (March 2009): "Recommended Minimum Performance Standards
for cdma2000 Ultra Mobile Broadband Access Terminal" (to be published as TIA-1171).
NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0089_v1.0_AT_MPS_for_UMB-090402.pdf.
[3] TIA-1121.001 (December 2007): "Physical Layer for Ultra Mobile Broadband (UMB) Air
Interface Specification".
[4] 3GPP2 C.S0090-0 Version 1.0, (March 2009): "Test Application Specification for cdma2000 Ultra
Mobile Broadband (UMB)" (to be published as TIA-1172).
NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0090-0_v1.0_TAS_for_UMB-090402.pdf.
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.3] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of candidate Harmonized Standards for application under the R&TTE Directive".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: network equipment providing data connectivity between a packet switched data network (typically the
Internet) and the access terminals
NOTE: Connectivity is typically provided at the Link Layer (PPP). An access network is equivalent to a Base
Station in TIA-1121.001 [3]. In the context of transmitter testing, an access network applies to operation
with a single carrier and single sector active only.
access terminal: device providing data connectivity to a user
NOTE: An access terminal may be connected to a computing device such as a laptop personal computer or may
be self-contained data device such as a personal digital assistant.
ACK channel: used by the access terminal to inform the access network whether a data packet transmitted on the
Forward Traffic Channel has been received successfully or not
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 301 908-16 V4.2.1 (2010-03)
active set: set of pilots assigned to a particular access terminal
adjacent channel leakage power ratio: ratio of the on-channel transmit power to the power measured in one of the
adjacent channels with no active channel in the adjacent channel
band class: set of frequency channels and a numbering scheme for these channels
code division multiple access: technique for spread-spectrum multiple-access digital communications that creates
channels through the use of unique code sequences
control channel: portion of the Forward Channel that carries control information
effective isotropic radiated power: product of the power supplied to the antenna
...
Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE)
for IMT-2000 Third-Generation cellular networks;
Part 16: Harmonized EN for IMT-2000,
Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE)
covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
Reference
DEN/ERM-TFES-002-16
Keywords
3G, 3GPP2, cdma2000, cellular, digital,
IMT-2000, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 12
4.2.1 Introduction. 12
4.2.2 Conducted spurious emissions when transmitting . 12
4.2.2.1 Definition . 12
4.2.2.2 Limits . 12
4.2.2.3 Conformance . 14
4.2.3 Transmitter maximum output power. 14
4.2.3.1 Definition . 14
4.2.3.2 Limits . 14
4.2.3.3 Conformance . 14
4.2.4 Minimum controlled output power . 14
4.2.4.1 Definition . 14
4.2.4.2 Limits . 14
4.2.4.3 Conformance . 14
4.2.5 Conducted spurious emissions when not transmitting . 14
4.2.5.1 Definition . 14
4.2.5.2 Limits . 15
4.2.5.3 Conformance . 15
4.2.6 Receiver Blocking characteristics . 15
4.2.6.1 Definition . 15
4.2.6.2 Limits . 16
4.2.6.3 Conformance . 17
4.2.7 Intermodulation spurious response attenuation . 17
4.2.7.1 Definition . 17
4.2.7.2 Limits . 17
4.2.7.3 Conformance . 18
4.2.8 Receiver Adjacent Channel Selectivity (ACS) . 18
4.2.8.1 Definition . 18
4.2.8.2 Limits . 18
4.2.8.3 Conformance . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Interpretation of the measurement results . 19
5.3 Essential radio test suites . 20
5.3.1 Conducted spurious emissions when transmitting . 20
5.3.2 Transmitter maximum output power. 20
5.3.3 Minimum controlled output power . 21
5.3.4 Conducted spurious emissions when not transmitting . 21
5.3.5 Receiver Blocking characteristics . 21
5.3.6 Intermodulation spurious response attenuation . 22
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
5.3.7 Receiver Adjacent Channel Selectivity (ACS) . 22
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 24
Annex B (normative): Mobile Station configurations . 26
B.1 Transmission configurations . 26
B.2 Common Procedures . 26
B.2.1 MAC and Physical Layer Configuration . 26
B.2.2 Forward and Reverse Channels and Link Assignment Block (LAB) Assignments . 26
B.2.2.1 Forward Link PER Measurement Test. 26
B.2.2.2 Emissions Test . 27
B.2.3 Session and Test Application Configurations. 27
B.2.3.1 Forward Link PER Measurement . 27
B.2.3.2 Emissions Test . 27
Annex C (normative): Environmental profile . 28
C.1 Introduction . 28
C.2 Temperature and Power Supply Voltage . 28
C.3 High Humidity . 28
C.4 Vibration Stability . 28
C.5 Shock Stability . 28
Annex D (normative): Standard Test Conditions . 29
D.1 Standard Equipment . . 29
D.1.1 Basic Equipment . 29
D.1.2 Associated Equipment . 29
D.2 Standard Environmental Test Conditions . 29
D.3 Standard Conditions for the Primary Power Supply . 29
D.3.1 General . 29
D.3.2 Standard DC Test Voltage from Accumulator Batteries . 29
D.3.3 Standard AC Voltage and Frequency . 30
D.4 Standard Test Equipment . 30
D.4.1 Access Network Simulator . 30
D.4.2 AWGN Generator. 30
D.4.3 CW Generator . 30
D.4.4 Spectrum Analyzer . 31
D.4.5 Average Power Meter . 32
D.5 Functional System Setups . 32
D.5.1 Functional Block Diagrams . 32
D.6 Error Rates Measurement . 34
D.6.1 Forward Traffic Channel PER . 34
D.7 Confidence Interval . 35
D.7.1 Confidence Level of Error Rate . 35
D.7.2 Confidence level of Detection Time . 37
Annex E (informative): The EN title in the official languages . 38
Annex F (informative): Bibliography . 39
History . 40
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
The present document is part 16 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (UE) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (BS) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE
Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE
Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (UE) covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (BS) covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (Repeaters)
covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 13: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (UE) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 14: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (BS) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 15: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD
Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 16: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB)
(UE) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 17: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS)
covering the essential requirements of article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
1 Scope
The present document applies to the following radio equipment types:
• User Equipment (also denoted as Mobile Stations or Access Terminals) for Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) compliant with TIA-1121.001 [3].
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
Table 1-1: UMB mobile station operating bands
Band Class (BC) Direction of transmission UMB mobile station operating
bands
Transmit 1 920 MHz to 1 980 MHz
6
Receive 2 110 MHz to 2 170 MHz
Transmit 1 710 MHz to 1 785 MHz
8
Receive 1 805 MHz to 1 880 MHz
Transmit 880 MHz to 915 MHz
9
Receive 925 MHz to 960 MHz
Transmit 2 500 MHz to 2 570 MHz
13
Receive 2 620 MHz to 2 690 MHz
The present document covers requirements for UMB User Equipment.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 908-1 (V4.1.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular
networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements,
covering the essential requirements of article 3.2 of the R&TTE Directive".
[2] 3GPP2 C.S0089-0 Version 1.0, (March 2009): "Recommended Minimum Performance Standards
for cdma2000 Ultra Mobile Broadband Access Terminal" (to be published as TIA-1171).
NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0089_v1.0_AT_MPS_for_UMB-090402.pdf.
[3] TIA-1121.001 (December 2007): "Physical Layer for Ultra Mobile Broadband (UMB) Air
Interface Specification".
[4] 3GPP2 C.S0090-0 Version 1.0, (March 2009): "Test Application Specification for cdma2000 Ultra
Mobile Broadband (UMB)" (to be published as TIA-1172).
NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0090-0_v1.0_TAS_for_UMB-090402.pdf.
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.3] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of candidate Harmonized Standards for application under the R&TTE Directive".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: network equipment providing data connectivity between a packet switched data network (typically the
Internet) and the access terminals
NOTE: Connectivity is typically provided at the Link Layer (PPP). An access network is equivalent to a Base
Station in TIA-1121.001 [3]. In the context of transmitter testing, an access network applies to operation
with a single carrier and single sector active only.
access terminal: device providing data connectivity to a user
NOTE: An access terminal may be connected to a computing device such as a laptop personal computer or may
be self-contained data device such as a personal digital assistant.
ACK channel: used by the access terminal to inform the access network whether a data packet transmitted on the
Forward Traffic Channel has been received successfully or not
ETSI
---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 301 908-16 V4.1.2 (2009-12)
active set: set of pilots assigned to a particular access terminal
adjacent channel leakage power ratio: ratio of the on-channel transmit power to the power measured in one of the
adjacent channels with no active channel in the adjacent channel
band class: set of frequency channels and a numbering scheme for these channels
code division multiple access: technique for spread-spectrum multiple-access digital communications that creates
channels through th
...
Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE)
for IMT-2000 Third-Generation cellular networks;
Part 16: Harmonized EN for IMT-2000,
Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE)
covering the essential requirements of article 3.2
of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
Reference
DEN/ERM-TFES-002-16
Keywords
3G, 3GPP2, cdma2000, cellular, digital,
IMT-2000, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope.7
2 References.7
2.1 Normative references.8
2.2 Informative references.8
3 Definitions, symbols and abbreviations .8
3.1 Definitions.8
3.2 Symbols.10
3.3 Abbreviations.11
4 Technical requirements specifications .11
4.1 Environmental profile.11
4.2 Conformance requirements.11
4.2.1 Introduction.12
4.2.2 Conducted spurious emissions when transmitting .12
4.2.2.1 Definition.12
4.2.2.2 Limits.12
4.2.2.3 Conformance.14
4.2.3 Transmitter maximum output power.14
4.2.3.1 Definition.14
4.2.3.2 Limits.14
4.2.3.3 Conformance.14
4.2.4 Minimum controlled output power .14
4.2.4.1 Definition.14
4.2.4.2 Limits.14
4.2.4.3 Conformance.14
4.2.5 Conducted spurious emissions when not transmitting .14
4.2.5.1 Definition.14
4.2.5.2 Limits.15
4.2.5.3 Conformance.15
4.2.6 Receiver Blocking characteristics.15
4.2.6.1 Definition.15
4.2.6.2 Limits.15
4.2.6.3 Conformance.17
4.2.7 Intermodulation spurious response attenuation.17
4.2.7.1 Definition.17
4.2.7.2 Limits.17
4.2.7.3 Conformance.18
4.2.8 Receiver Adjacent Channel Selectivity (ACS) .18
4.2.8.1 Definition.18
4.2.8.2 Limits.18
4.2.8.3 Conformance.19
5 Testing for compliance with technical requirements.19
5.1 Environmental conditions for testing .19
5.2 Interpretation of the measurement results .19
5.3 Essential radio test suites.20
5.3.1 Conducted spurious emissions when transmitting .20
5.3.2 Transmitter maximum output power.20
5.3.3 Minimum controlled output power .21
5.3.4 Conducted spurious emissions when not transmitting .21
5.3.5 Receiver Blocking characteristics.21
5.3.6 Intermodulation spurious response attenuation.22
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
5.3.7 Receiver Adjacent Channel Selectivity (ACS) .22
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).24
Annex B (normative): Mobile Station configurations.26
B.1 Transmission configurations .26
B.2 Common Procedures.26
B.2.1 MAC and Physical Layer Configuration .26
B.2.2 Forward and Reverse Channels and Link Assignment Block (LAB) Assignments .26
B.2.2.1 Forward Link PER Measurement Test.26
B.2.2.2 Emissions Test.27
B.2.3 Session and Test Application Configurations.27
B.2.3.1 Forward Link PER Measurement .27
B.2.3.2 Emissions Test.27
Annex C (normative): Environmental profile .28
C.1 Introduction.28
C.2 Temperature and Power Supply Voltage.28
C.3 High Humidity.28
C.4 Vibration Stability.28
C.5 Shock Stability.28
Annex D (normative): Standard Test Conditions .29
D.1 Standard Equipment.29
D.1.1 Basic Equipment.29
D.1.2 Associated Equipment.29
D.2 Standard Environmental Test Conditions.29
D.3 Standard Conditions for the Primary Power Supply .29
D.3.1 General.29
D.3.2 Standard DC Test Voltage from Accumulator Batteries .29
D.3.3 Standard AC Voltage and Frequency .30
D.4 Standard Test Equipment.30
D.4.1 Access Network Simulator.30
D.4.2 AWGN Generator.30
D.4.3 CW Generator.30
D.4.4 Spectrum Analyzer.31
D.4.5 Average Power Meter.32
D.5 Functional System Setups .32
D.5.1 Functional Block Diagrams.32
D.6 Error Rates Measurement.34
D.6.1 Forward Traffic Channel PER.34
D.7 Confidence Interval .35
D.7.1 Confidence Level of Error Rate .35
D.7.2 Confidence level of Detection Time.37
Annex E (informative): The EN title in the official languages .38
Annex F (informative): Bibliography.39
History .40
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Public Enquiry phase
of the ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
The present document is part 16 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (UE) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (BS) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE
Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE
Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (UE) covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (BS) covering the
essential requirements of article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (Repeaters)
covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 13: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (UE) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 14: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (BS) covering
the essential requirements of article 3.2 of the R&TTE Directive";
Part 15: "Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD
Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 16: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB)
(UE) covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 17: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS)
covering the essential requirements of article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.3].
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
1 Scope
The present document applies to the following radio equipment types:
• User Equipment (also denoted as Mobile Stations or Access Terminals) for Evolved CDMA Multi-Carrier
Ultra Mobile Broadband (UMB) compliant with TIA-1121 [3].
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
Table 1-1: UMB mobile station operating bands
Band Class (BC) Direction of transmission UMB mobile station operating
bands
Transmit 1 920 MHz to 1 980 MHz
6
Receive 2 110 MHz to 2 170 MHz
Transmit 1 710 MHz to 1 785 MHz
8
Receive 1 805 MHz to 1 880 MHz
Transmit 880 MHz to 915 MHz
9
Receive 925 MHz to 960 MHz
Transmit 2 500 MHz to 2 570 MHz
13
Receive 2 620 MHz to 2 690 MHz
The present document covers requirements for UMB User Equipment.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 908-1 (V4.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular
networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements,
covering the essential requirements of article 3.2 of the R&TTE Directive".
[2] 3GPP2 C.S0089, Version 1.0, (March 2009): "Recommended Minimum Performance Standards
for cdma2000 Ultra Mobile Broadband Access Terminal" (to be published as TIA-1171).
NOTE: Available at ftp://ftp.3gpp2.org/TSGC/Working/2009/2009-03-NewOrleans/TSG-C-2009-03-
New%20Orleans/Plenary/C00-20090330-116a%20C.S0089%20PPV.zip.
[3] TIA-1121 (2009): "Physical Layer for Ultra Mobile Broadband (UMB) Air Interface
Specification" (see alternatively: 3GPP2 C. S0084-001-0 V3.0, August 2008).
[4] 3GPP2 C.S0090, Version 1.0, (March 2009): "Test Application Specification for cdma2000 Ultra
Mobile Broadband (UMB)" (to be published as TIA-1172).
NOTE: Available at http://www.3gpp2.org/Public_html/specs/C.S0090-0_v1.0_TAS_for_UMB-090402.pdf.
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.3] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of candidate Harmonized Standards for application under the R&TTE Directive".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: network equipment providing data connectivity between a packet switched data network (typically the
Internet) and the access terminals
NOTE: Connectivity is typically provided at the Link Layer (PPP). An access network is equivalent to a base
station in TIA-1121 [3]. In the context of transmitter testing, an access network applies to operation with
a single carrier and single sector active only.
access terminal: device providing data connectivity to a user
NOTE: An access terminal may be connected to a computing device such as a laptop personal computer or may
be self-contained data device such as a personal digital assistant.
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 301 908-16 V4.1.1 (2009-04)
ACK channel: used by the access terminal to inform the access network whether a data packet transmitted on the
Forward Traffic Channel has been received successfully or not
active set: set of pilots assigned to a particular access terminal
adjacent channel leakage power ratio: ratio of the on-channel transmit power to the power measured in one of the
adjacent channels with no active channel in the adjacent channel
band class: set of frequency channels and a numbering scheme for these channels
code division multiple access: technique for spread-spectrum multiple-access digital communications that creates
channels through the use of unique code sequences
control channel: portion of the Forward Channel that carries control information
effec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.