SIST HD 505.5.1 S1:1998

Common test methods for insulating and sheathing materials of electric cables -- Part 5: Methods specific to filling compounds -- Section 1: Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23°C - D.C. Resistivity at 23°C and 100°C

This standard specifies the test methods for filling compounds of electric cables used with telecommunication equipment.          This Section One of Part 5 gives the methods for drop-point, separation of oil, lower temperature brittleness, total acid number, absence of corrosive components, permittivity at 23 C, d.c. resistivity at 23 C and 100 C.

Allgemeine Prüfungen für Isolier- und Mantelwerkstoffe für Kabel und isolierte Leitungen -- Teil 5: Besondere Prüfungen für Füllmassen -- Hauptabschnitt 1: Topfpunkt Ölausscheidung - Kältesprödigkeit - Gesamtzäurezahl - Fehlen korrosiver Bestandteile - Dielektrizitätskonstante bei 23°C - Spezifischer Widerstand bei 23°C und 100°C

Méthodes d'essais communes pour les matériaux d'isolation et de gainage des câbles électriques -- Partie 5: Méthodes spécifiques pour les matières de remplissage -- Section 1: Point de goutte - Séparation d'huile - Fragilité à basse température - Indice d'acide total - Absence de composés corrosifs - Permittivité à 23°C - Résistivité en courant continu à 23°C et 100°C

Common test methods for insulating and sheating materials of electric cables - Part 5: Methods specific to filling compounds - Section 1: Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permitivity at 23°C. D.C - Resistivity at 23 °C and 100 °C

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-1998
• Withdrawal Date: 31-Aug-2002
• ICS: 29.060.20 - Cables
• Technical Committee: IEKA - Electric cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: HD 505.5.1 S1:1992 - Common test methods for insulating and sheathing materials of electric cables - Part 5: Methods specific to filling compounds - Section 1: Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23°C - D.C. Resistivity at 23°C and 100°C

Relations

• Replaced By: SIST EN 60811-5-1:2000 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
• Effective Date: 06-May-2014
• Replaced By: SIST EN 60811-5-1:2000 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 505.5.1 S1:1998
01-februar-1998
Common test methods for insulating and sheating materials of electric cables -
Part 5: Methods specific to filling compounds - Section 1: Drop-point - Separation
of oil - Lower temperature brittleness - Total acid number - Absence of corrosive
components - Permitivity at 23°C. D.C - Resistivity at 23 °C and 100 °C
Common test methods for insulating and sheathing materials of electric cables -- Part 5:
Methods specific to filling compounds -- Section 1: Drop-point - Separation of oil - Lower
temperature brittleness - Total acid number - Absence of corrosive components -
Permittivity at 23°C - D.C. Resistivity at 23°C and 100°C
Allgemeine Prüfungen für Isolier- und Mantelwerkstoffe für Kabel und isolierte Leitungen
-- Teil 5: Besondere Prüfungen für Füllmassen -- Hauptabschnitt 1: Topfpunkt
Ölausscheidung - Kältesprödigkeit - Gesamtzäurezahl - Fehlen korrosiver Bestandteile -
Dielektrizitätskonstante bei 23°C - Spezifischer Widers
...