Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert), with fine pitch thread (ISO/DIS 10512:2024)

ISO 10512:2012 specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for diamter sizes up to and including 16 mm and product grade B for diameter sizes above 16 mm, and with property classes 6, 8 and 10.

Verbindungselemente - Sechskantmuttern mit Klemmteil - Normalhohe Muttern (mit nichtmetallischem Einsatz), mit Feingewinde (ISO/DIS 10512:2024)

Fixations - Écrous hexagonaux autofreinés - Écrous normaux (à anneau non métallique), à pas fin (ISO/DIS 10512:2024)

L'ISO 10512:2012 spécifie les caractéristiques des écrous hexagonaux normaux autofreinés (à anneau non métallique) à filetage métrique à pas fin, de diamètre de filetage D de 8 mm à 36 mm inclus, de grade A pour les diamètres D jusqu'à 16 mm et de grade B pour les diamètres D supérieurs à 16 mm, et de classes de qualité 6, 8 et 10.

Vezni elementi - Šestrobe zaščitne matice - Navadni matice (s plastičnim vložkom) z drobnim navojem (ISO/DIS 10512:2024)

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Jun-2024
Due Date
29-Oct-2024

Relations

Buy Standard

Draft
prEN ISO 10512:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 10512:2024
01-julij-2024
Nadomešča:
SIST EN ISO 10512:2013
Vezni elementi - Šestrobe zaščitne matice - Navadni matice (s plastičnim vložkom)
z drobnim navojem (ISO/DIS 10512:2024)
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert), with
fine pitch thread (ISO/DIS 10512:2024)
Verbindungselemente - Sechskantmuttern mit Klemmteil - Normalhohe Muttern (mit
nichtmetallischem Einsatz), mit Feingewinde (ISO/DIS 10512:2024)
Fixations - Écrous hexagonaux autofreinés - Écrous normaux (à anneau non métallique),
à pas fin (ISO/DIS 10512:2024)
Ta slovenski standard je istoveten z: prEN ISO 10512
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.20 Matice Nuts
oSIST prEN ISO 10512:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10512:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10512:2024
DRAFT
International
Standard
ISO/DIS 10512
ISO/TC 2/SC 12
Fasteners — Prevailing torque
Secretariat: DIN
hexagon nuts — Regular nuts (with
Voting begins on:
non-metallic insert), with fine pitch
2024-06-06
thread
Voting terminates on:
2024-08-29
Fixations — Écrous hexagonaux autofreinés — Écrous normaux
(à anneau non métallique), à pas fin
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10512:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10512:2024
DRAFT
ISO/DIS 10512:2024(en)
International
Standard
ISO/DIS 10512
ISO/TC 2/SC 12
Fasteners — Prevailing torque
Secretariat: DIN
hexagon nuts — Regular nuts (with
Voting begins on:
non-metallic insert), with fine
pitch thread
Voting terminates on:
Fixations — Écrous hexagonaux autofreinés — Écrous normaux
(à anneau non métallique), à pas fin
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10512:2024(en)
© ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10512:2024
ISO/DIS 10512:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.