SIST EN 62841-2-1:2018/oprAC:2020
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 2-1: particular requirements for hand-held drills and impact drills
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 2-1: particular requirements for hand-held drills and impact drills
This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-1: Exigences particulières pour les perceuses portatives et les perceuses à percussion
No scope available
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-1. del: Posebne zahteve za ročne vrtalnike in udarne (vibracijske) vrtalnike - Popravek AC
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
SIST EN 62841-2-1:2018/oprAC:2020
01-september-2020
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
1. del: Posebne zahteve za ročne vrtalnike in udarne (vibracijske) vrtalnike -Popravek AC
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - safety - part 2-1: particular requirements for hand-held drills and impact drills
Ta slovenski standard je istoveten z: EN 62841-2-1:2018/prACICS:
25.080.20 Frezalniki Boring and milling machines
25.140.20 Električna orodja Electric tools
SIST EN 62841-2-1:2018/oprAC:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN 62841-2-1:2018/oprAC:2020
---------------------- Page: 2 ----------------------
SIST EN 62841-2-1:2018/oprAC:2020
EUROPEAN STANDARD DRAFT
EN 62841-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAC
July 2020
ICS
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - safety - part 2-1: particular
requirements for hand-held drills and impact drills
To be completed To be completed
This draft amendment prAC, if approved, will modify the European Standard ; it is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2020-09-25.It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 72183 Ref. No. EN 62841-2-1:2018/prAC E---------------------- Page: 3 ----------------------
SIST EN 62841-2-1:2018/oprAC:2020
EN 62841-2-1:2018/prAC:2020 (E)
1 European foreword
2 This draft amendment (EN 62841-2-1:2018/prAC:2020) was prepared by CLC/TC 116 “Safety and
3 environmental aspects of motor-operated electric tools”.4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 48 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6 This document modifies by common modifications EN 62841-2-1:2018/prA1:2020, which consists of the
7 text of 116/458/CDV (future IEC 62841-2-1:2017/A1:202X, Ed. 1.0) prepared by IEC/TC 116 “Safety of
8 motor-operated electric tools”.9 If approved, this draft amendment will be published as EN 62841-2-1:2017/A12:202X.
10 This document has been prepared under a mandate given to CENELEC by the European Commission and
11 the European Free Trade Association, and supports essential requirements of EU Directive(s).
12 For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of
13 EN 62841-2-1:2018/A11:2...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.