SIST EN 61753-051-3:2004
(Main)Fibre optic interconnecting devices and passive components performance standard -- Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment
Fibre optic interconnecting devices and passive components performance standard -- Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment
Contains the minimum initial test and measurement requirements and severities for a fibre optic attenuator to meet the requirements of category U environments.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten -- Teil 051-3: Feste Einmoden-Lichtwellenleiter-Dämpfungsglieder mit Anschlusssteckern für die Kategorie U - Unkontrollierte Umgebung
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques -- Partie 051-3: Atténuateurs fixes à fibre unimodale de style prise pour la catégorie U - Environnement non contrôlé
Contient les prescriptions de mesure et d'essai initiales minimales et les sévérités pour un atténuateur à fibre optique afin d'être classé dans la catégorie U.
Izvedbeni standard povezovalnih naprav in pasivnih komponent optičnih vlaken – 051-3. del: Fiksirani zmanjševalci z enorodnimi vlakni in priključki za kategorijo U; nekontrolirano okolje (IEC 61753- 051-3:2001)*
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61753-051-3:2004
STANDARD
september 2004
Izvedbeni standard povezovalnih naprav in pasivnih komponent optičnih
vlaken – 051-3. del: Fiksirani zmanjševalci z enorodnimi vlakni in priključki za
kategorijo U; nekontrolirano okolje (IEC 61753- 051-3:2001)*
Fibre optic interconnecting devices and passive components performance
standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category
U - Uncontrolled environment (IEC 61753- 051-3:2001)
ICS 33.180.20 Referenčna številka
SIST EN 61753-051-3:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61753-051-3
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2002
ICS 33.180.20
English version
Fibre optic interconnecting devices and
passive components performance standard
Part 051-3: Single-mode fibre, plug-style
fixed attenuators for category U –
Uncontrolled environment
(IEC 61753-051-3:2001)
Norme de qualité de fonctionnement Lichtwellenleiter-Verbindungselemente
des dispositifs d'interconnexion et und passive Bauteile –
composants passifs à fibres optiques Betriebsverhalten
Partie 051-3: Atténuateurs fixes Teil 051-3: Feste Einmoden-
à fibre unimodale de style prise Lichtwellenleiter-Dämpfungsglieder mit
pour la catégorie U – Anschlusssteckern für die Kategorie U -
Environnement non contrôlé Unkontrollierte Umgebung
(CEI 61753-051-3:2001) (IEC 61753-051-3:2001)
This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-051-3:2002 E
---------------------- Page: 2 ----------------------
EN 61753-051-3:2002 - 2 -
Foreword
The text of document 86B/1592/FDIS, future edition 1 of IEC 61753-051-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-051-3 on 2002-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-051-3:2001 was approved by CENELEC as a
European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61753-051-3:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 1997
passive components - Basic test and
measurement procedures
Part 2-1: Tests - Vibration (sinusoidal)
1) 2)
IEC 61300-2-2 - Part 2-2: Tests - Mating durability EN 61300-2-2 1997
1) 2)
IEC 61300-2-12 - Part 2-12: Tests - Impact EN 61300-2-12 1997
1) 2)
IEC 61300-2-14 - Part 2-14: Tests - Maximum input power EN 61300-2-14 1997
1) 2)
IEC 61300-2-17 - Part 2-17: Tests - Cold EN 61300-2-17 1997
1) 2)
IEC 61300-2-18 - Part 2-18: Tests - Dry heat - High EN 61300-2-18 1997
temperature endurance
1) 2)
IEC 61300-2-19 - Part 2-19: Tests - Damp heat (steady EN 61300-2-19 1997
state)
1) 2)
IEC 61300-2-22 - Part 2-22: Tests - Change of EN 61300-2-22 1997
temperature
1) 2)
IEC 61300-3-2 - Part 3-2: Examinations and EN 61300-3-2 1999
measurements - Polarization
dependence of attenuation in a single-
mode fibre optic device
1) 2)
IEC 61300-3-4 - Part 3-4: Examinations and EN 61300-3-4 2001
measurements - Attenuation
1) 2)
IEC 61300-3-6 - Part 3-6: Examinations and EN 61300-3-6 1997
measurements - Return loss
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
EN 61753-051-3:2002 - 4 -
Publication Year Title EN/HD Year
1) 2)
IEC 61753-1-1 - Fibre optic interconnecting devices and EN 61753-1-1 2001
passive components performance
standard
Part 1-1: General and guidance -
Interconnecting devices (connectors)
---------------------- Page: 5 ----------------------
�����
���
�������������� ���
�����������
�������������
����������������
��������
�������������
�������
����������������������������������
�����������������������������������
������������������� ���!�������������"
#�����������$
%������������������ ���!������������������&��
������������������’�����(�"
��)��������������������*��
+�!�����������������������’���)��������
�����)����������������������������������"
#���������$
,��’����������!��-����’���&��������������������
��������’��&�(�"
(��������������)��������
©���"�������������������)���� ����������-���� ⎯��"�)9��86����,**���86��������-��
�� ����),�������� �����)�!*� ,��������)����C������)���������� ��� ),��� ��� �6��� )�!*� ,����� �,9� !�� ��)���� ��� ��� ���*�?��� ��
���*����������5��*5���������5��� ����������),��,� ���)�� ���/ ,�9� ����� ��� !9� ,�9� ��,��/� �*� ����� � ��� �� 6,�� ,*/
�*� �����5��� ��� �� ,��5��/� 9� ��)���� *,� )6��� �)��� ��� *�� �� *����8� )6��� �)9��8� ,��� �� ����*�/� <��6���� )���������� ��
�� ����*��/��,���*7, ����� �������*7�������1 <�����8�������6��)�!*��6��1
������,����,*��*� ����� 6�� ,*�"��������� ’/��������>,���!���D���-,/��<��?��*,��
��*��,3(�A2�����.�.��’�� ���,�*(����,�*@�� 1 6 ���"�<�!�������6��)(##<<<1�� 1 6
"�������E
�"���������� �*� ����� 6��5��� ������,����,*�
F
���"��"���
�������,����,*� �*� ����� 6�� ,*� "���������
������������������������������������
��������������������������������
---------------------- Page: 6 ----------------------
61753-051-3 © IEC:2001 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS PERFORMANCE STANDARD –
Part 051-3: Single-mode fibre, plug-style fixed attenuators
for category U – Uncontrolled environment
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-051-3 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report of voting
86B/1592/FDIS 86B/1625/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
Annex A forms an integral part of this standard.
The committee has decided that the contents of this publication will remain unchanged until 2006.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
The contents of the corrigendum of October 2004 have been included in this copy.
---------------------- Page: 7 ----------------------
$�%&’��&��’� ©���"(���� ��&��
+�\?��>#W�����W�?�>����W��^�H�_���,
%�H�#%,,�_���>@#>���W,�#�?+>?@%����,W%�H%?H�"
#���������$�,��’����������!��-����’���&��������������������
��������’��&�(�"�(��������������)��������
�� ,����
�6��� ),��� ��� ��"� $�%&’� ���,����
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.