Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)

This European Standard specifies equipment and a procedure for determining of the pull-off resistance of external thermal insulation composite systems (ETICS). The method described ist known as "foam block test". NOTE: This test is not intended to measure the pull-off resistance of the ETICS to the substrate.

Wärmedämmstoffe für das Bauwesen - Bestimmung der Abreißfestigkeit von außenseitigen Wärmedämm-Verbundsystemen (WDVS)(Schaumblock-Verfahren)

Diese Europäische Norm legt Prüfeinrichtungen und ein Verfahren zur Bestimmung der Abreißfestigkeit von außenseitigen Wärmedämm-Verbundsystemen (WDVS) fest, die mechanisch befestigt oder mechanisch befestigt und geklebt sind. Das beschriebene Verfahren ist als "Schaumblock-Verfahren" bekannt.
ANMERKUNG      Die Prüfung ist nicht dazu vorgesehen, die Abreißfestigkeit des WDVS gegenüber dem Untergrund  zu messen.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance a l'arrachement des systemes composites d'isolation thermique par l'extérieur (systemes I.T.E) (essai au bloc de mousse)

La présente norme européenne prescrit l'équipement et un mode opératoire pour déterminer la résistance a l'arrachement des systemes composites d'isolation thermique externe (ETICS). La méthode décrite est connue comme l'essai au bloc de mousse. NOTE: Cet essai n'est pas destiné a mesurer la résistance a l'arrachement de l'ETICS de son support.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje oprijema kontaktnega fasadnega toplotnoizolacijskega sistema (ETICS) na podlago (preskus z blokom trde pene)

General Information

Status
Withdrawn
Publication Date
30-Nov-2003
Withdrawal Date
02-Oct-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Oct-2019
Due Date
26-Oct-2019
Completion Date
03-Oct-2019

RELATIONS

Buy Standard

Standard
SIST EN 13495:2003
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje oprijema kontaktnega fasadnega toplotnoizolacijskega sistema (ETICS) na podlago (preskus z blokom trde pene)Wärmedämmstoffe für das Bauwesen - Bestimmung der Abreißfestigkeit von außenseitigen Wärmedämm-Verbundsystemen (WDVS)(Schaumblock-Verfahren)Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance a l'arrachement des systemes composites d'isolation thermique par l'extérieur (systemes I.T.E) (essai au bloc de mousse)Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13495:2002SIST EN 13495:2003en01-december-2003SIST EN 13495:2003SLOVENSKI

STANDARD
SIST EN 13495:2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13495October 2002ICS 91.100.60English versionThermal insulation products for building applications -Determination of the pull-off resistance of external thermalinsulation composite systems (ETICS)(foam block test)Produits isolants thermiques destinés aux applications dubâtiment - Détermination de la résistance à l'arrachementdes systèmes composites d'isolation thermique parl'extérieur (systèmes I.T.E) (essai au bloc de mousse)Wärmedämmstoffe für das Bauwesen - Bestimmung derAbreißfestigkeit von außenseitigen Wärmedämm-Verbundsystemen (WDVS)(Schaumblock-Verfahren)This European Standard was approved by CEN on 19 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13495:2002 ESIST EN 13495:2003

EN 13495:2002 (E)2ContentspageForeword......................................................................................................................................................................31Scope..............................................................................................................................................................42Normative references....................................................................................................................................43Terms and definitions, symbols and units..................................................................................................43.1Terms and definitions....................................................................................................................................43.2Symbols and units.........................................................................................................................................54Principle..........................................................................................................................................................55Apparatus.......................................................................................................................................................55.1Test apparatus................................................................................................................................................55.2Concrete slab.................................................................................................................................................65.3Foam blocks...................................................................................................................................................65.4Glue.................................................................................................................................................................65.5Timber panel...................................................................................................................................................65.6Tensile testing machine................................................................................................................................66Test specimens..............................................................................................................................................66.1Preparation of test specimens......................................................................................................................66.2Number of test specimens............................................................................................................................66.3Conditioning of test specimens...................................................................................................................77Procedure.......................................................................................................................................................77.1Test conditions..............................................................................................................................................77.2Test procedure...............................................................................................................................................77.3Calculation and expression of results.........................................................................................................78Accuracy of measurement............................................................................................................................79Test report......................................................................................................................................................7SIST EN 13495:2003

EN 13495:2002 (E)3ForewordThis document (EN 13495:2002) has been prepared by Technical Committee CEN /TC 88, "Thermal insulatingmaterials and products", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.This European Standard is one of a series of standards which specify test methods for determining dimensions andproperties of thermal insulating materials and products. It supports a series of product standards for thermalinsulating materials and products which derive from the Council Directive of 21 December 1988 on theapproximation of laws, regulations and administrative provisions of the Member States relating to constructionproducts (Directive 89/106/EEC) through the consideration of the essential requirements.This European Standard has been drafted for applications in buildings but may also be used in other areas where itis relevant.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13495:2003

EN 13495:2002 (E)41 ScopeThis European Standard specifies equipment and a procedure for determining of the pull-off resistance of externalthermal insulation composite systems (ETICS) which are mechanical fixed or mechanical fixed and bonded. Themethod described is known as "foam block test".NOTEThis test is not intended to measure the pull-off resistance of the ETICS to the substrate.2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references subsequent amendments to, or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 206-1, Concrete — Part 1:Specification, performance, production and conformity.EN 822, Therma

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.