SIST EN 61754-23:2006

Fibre optic connector interfaces -- Part 23: Type LX.5 connector family

This part of 61754 defines the standard interface dimensions for  the type LX.5 family of connectors.

Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 23: Steckverbinderfamilie der Bauart LX.5

Interfaces de connecteurs pour fibres optiques -- Partie 23: Famille de connecteurs de type LX.5

Définit les dimensions d'interface normalisées pour la famille de connecteurs de type LX.5.

Vmesniki optičnih konektorjev – 23. del: Konektorska družina tipa LX.5 (IEC 61754-23:2005)

General Information

• Status: Published
• Publication Date: 28-Feb-2006
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2006
• Due Date: 01-Mar-2006
• Completion Date: 01-Mar-2006
• Ref Project: EN 61754-23:2005 - Fibre optic connector interfaces - Part 23: Type LX.5 connector family

Standards Content (Sample)

SLOVENSKI SIST EN 61754-23:2006

STANDARD
marec 2006
Vmesniki optičnih konektorjev – 23. del: Konektorska družina tipa LX.5 (IEC
61754-23:2005)
Fibre optic connector interfaces - Part 23: Type LX.5 connector family (IEC 61754-
23:2005)
ICS 33.180.20 Referenčna številka
SIST EN 61754-23:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61754-23
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2005

ICS 33.180.20


English version


Fibre optic connector interfaces
Part 23: Type LX.5 connector family
(IEC 61754-23:2005)


Interfaces de connecteurs  Steckgesichter von Lichtwellenleiter-
pour fibres optiques Steckverbindern
Partie 23: Famille de connecteurs Teil 23: Steckverbinderfamilie
de type LX.5 der Bauart LX.5
(CEI 61754-23:2005) (IEC 61754-23:2005)






This European Standard was approved by CENELEC on 2005-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61754-23:2005 E

---------------------- Page: 2 ----------------------

EN 61754-23:2005 - 2 -
Foreword
The text of document 86B/2108/FDIS, future edition 1 of IEC 61754-23, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-23 on 2005-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-07-01
__________
Endorsement notice
The text of the International Standard IEC 61754-23:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



61754-23
INTERNATIONAL


Première édition
STANDARD

First edition

2005-06


Interfaces de connecteurs pour fibres optiques –
Partie 23:
Famille de connecteurs de type LX.5

Fibre optic connector interfaces –
Part 23:
Type LX.5 connector family

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Q
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

61754-23  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Description .9
3 Interfaces .9

Figure 1 – Plug connector interface reference planes .11
Figure 1a – Detail A of Figure 1 – PC polish plug connector interface – Expanded view
drawing not-to-scale.11
Figure 1b – Detail A of Figure 1 – APC polish plug connector interface – Expanded view
drawings not-to-scale .13
Figure 2 – Plug connector interface .19
Figure 3 – APC plug connector interface – Expanded view from front.21
Figure 4 – Duplex plug interface.21
Figure 5 – Simplex adaptor interface .27
Figure 6 – Duplex adaptor port interface.31
Figure 7 – Pin gauge for adaptor .35

Table 1 – Dimensions of the PC polished end face .11
Table 2 – Dimensions of the APC polished end face .15
Table 3 – Dimensions of the plug connector interface .23
Table 4 – Plug connector interface – Ferrule grade.25
Table 5 – Dimensions of the adaptor interface .33

---------------------- Page: 5 ----------------------

61754-23  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC CONNECTOR INTERFACES –

Part 23: Type LX.5 connector family


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-23 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2108/FDIS 86B/2134/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 6 ----------------------

61754-23  IEC:2005 – 7 –
IEC 61754 consists of multiple parts,
...