iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 15118-10:2024

(Main)

Road vehicles - Vehicle to grid communication interface - Part 10: Physical layer and data link layer requirements for single-pair Ethernet (ISO/DIS 15118-10:2024)

Road vehicles - Vehicle to grid communication interface - Part 10: Physical layer and data link layer requirements for single-pair Ethernet (ISO/DIS 15118-10:2024)

This document specifies the requirements of the physical and data link layer of a wired ethernet High Level Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment (EVSE). The wired ethernet communication technology is used as an alternative to the wired PLC communication technology as defined in ISO 15118-3.
It covers the overall information exchange between all actors involved in the electrical energy exchange. ISO 15118 (all parts) are applicable for conductive charging.

Straßenfahrzeuge - Kommunikationsschnittstelle zwischen Fahrzeug und Ladestation - Teil 10: Anforderungen an die physikalische Schicht und Sicherungsschicht für Zweidraht Ethernet (ISO/DIS 15118-10:2024)

Véhicules routiers - Interface de communication entre véhicule et réseau électrique - Partie 10: Exigences relatives à la couche physique et à la couche liaison de données pour Ethernet à paire unique (ISO/DIS 15118-10:2024)

Cestna vozila - Komunikacijski vmesnik med vozilom in omrežjem - 10. del: Zahteve za fizične in podatkovne povezovalne plasti za enoparni Ethernet (ISO/DIS 15118-10:2024)

General Information

Status
Not Published
Public Enquiry End Date
31-Mar-2024
ICS
35.100.05 - Multilayer applications
43.040.15 - Car informatics. On board computer systems
43.120 - Electric road vehicles
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
23-Jan-2024
Due Date
11-Jun-2024
Directive
2023/1804 - Regulation (EU) 2023/1804 of the European Parliament and of the Council of 13 September 2023 on the deployment of alternative fuels infrastructure, and repealing Directive 2014/94/EU
Mandate
M/581 - Standardisation Request as regards communication exchange, electricity, and hydrogen supply for road, maritime transport and inland navigation in support of Directive 2014/94/EU and its planned revision under the ‘Fit for 55’package
Ref Project
prEN ISO 15118-10 - Road vehicles - Vehicle to grid communication interface - Part 10: Physical layer and data link layer requirements for single-pair Ethernet (ISO/DIS 15118-10:2024)

Buy Standard

prEN ISO 15118-10:2024prEN ISO 15118-10:2024
PreviousNext
Draft
prEN ISO 15118-10:2024
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 15118-10:2024
01-marec-2024
Cestna vozila - Komunikacijski vmesnik med vozilom in omrežjem - 10. del:
Zahteve za fizične in podatkovne povezovalne plasti za enoparni Ethernet (ISO/DIS
15118-10:2024)
Road vehicles - Vehicle to grid communication interface - Part 10: Physical layer and
data link layer requirements for single-pair Ethernet (ISO/DIS 15118-10:2024)
Straßenfahrzeuge - Kommunikationsschnittstelle zwischen Fahrzeug und Ladestation -
Teil 10: Anforderungen an die physikalische Schicht und Sicherungsschicht für
Zweidraht Ethernet (ISO/DIS 15118-10:2024)
Véhicules routiers - Interface de communication entre véhicule et réseau électrique -
Partie 10: Exigences relatives à la couche physique et à la couche liaison de données
pour Ethernet à paire unique (ISO/DIS 15118-10:2024)
Ta slovenski standard je istoveten z: prEN ISO 15118-10
ICS:
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
oSIST prEN ISO 15118-10:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15118-10:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15118-10:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15118-10
ISO/TC 22/SC 31 Secretariat: DIN
Voting begins on: Voting terminates on:
2024-01-10 2024-04-03
Road vehicles — Vehicle to grid communication
interface —
Part 10:
Physical layer and data link layer requirements for single-
pair Ethernet
ICS: 43.120
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15118-10:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15118-10:2024
ISO/DIS 15118-10:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15118-10
ISO/TC 22/SC 31 Secretariat: DIN
Voting begins on: Voting terminates on:

Road vehicles — Vehicle to grid communication
interface —
Part 10:
Physical layer and data link layer requirements for single-
pair Ethernet
ICS: 43.120
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15118-10:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15118-10:2024
ISO/DIS 15118-10:2023(E)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15118-9:2023(Main)
Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022)
EN ISO 15118-9:2023

This document specifies conformance tests in the form of an abstract test suite (ATS) for a system under test (SUT) implementing an electric-vehicle or supply-equipment communication controller (EVCC or SECC) with support for WLAN-based high-level communication (HLC) according to ISO 15118 8 and against the background of ISO 15118-1. These conformance tests specify the testing of capabilities and behaviours of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118 8 and against what the implementer states the SUT implementation's capabilities are.
The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118 8. The behaviour tests of the ATS examine an implementation as thoroughly as practical over the full range of dynamic conformance requirements defined in ISO 15118 8 and within the capabilities of the SUT (see NOTE below).
A test architecture is described in correspondence to the ATS. The abstract test cases in this document are described leveraging this test architecture and are specified in descriptive tabular format for the ISO/OSI physical and data link layers (layers 1 and 2).
In terms of coverage, this document only covers normative sections and requirements in ISO 15118 8. This document can additionally refer to specific tests for requirements on referenced standards (e.g. IEEE, or industry consortia standards, like WiFi Alliance) as long as they are relevant in terms of conformance for implementations according to ISO 15118 8. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118 8. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the abstract test cases defined in this document only consider the communication protocol and the system's behaviour defined ISO 15118 8. The power flow between the EVSE and the EV is not considered.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15118-20:2022(Main)
Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements (ISO 15118-20:2022)
EN ISO 15118-20:2022

This document specifies the communication between the electric vehicle (EV), including battery electric
vehicle (BEV) and plug-in hybrid electric vehicle (PHEV), and the electric vehicle supply equipment
(EVSE). The application layer messages defined in this document are designed to support the electricity
power transfer between an EV and an EVSE.
This document defines the communication messages and sequence requirements for bidirectional power
transfer.
This document furthermore defines requirements of wireless communication for both conductive
charging and wireless charging as well as communication requirements for automatic connection device
and information services about charging and control status.
The purpose of this document is to detail the communication between an electric vehicle communication
controller (EVCC) and a supply equipment communication controller (SECC). Aspects are specified to
detect a vehicle in a communication network and enable an Internet Protocol (IP) based communication
between the EVCC and the SECC.
This document defines messages, data model, XML/EXI-based data representation format, usage of
V2GTP, TLS, TCP and IPv6. These requirements belong to the 3rd until the 7th OSI layer model. In addition,
the document describes main service sequences of conductive charging, wireless power transfer and
bidirectional power transfer, and how data link layer services can be accessed from an OSI layer 3
perspective.

  • Standard
    570 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    571 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15118-8:2020(Main)
Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2020)
EN ISO 15118-8:2020

This document specifies the requirements of the physical and data link layer of a wireless High Level
Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment
(EVSE). The wireless communication technology is used as an alternative to the wired communication
technology as defined in ISO 15118-3.
It covers the overall information exchange between all actors involved in the electrical energy exchange.
ISO 15118 (all parts) are applicable for conductive charging as well as Wireless Power Transfer (WPT).
For conductive charging, only EVSEs compliant with “IEC 61851-1 modes 3 and 4” and supporting HLC
are covered by this document. For WPT, charging sites according to IEC 61980 (all parts) and vehicles
according to ISO 19363 are covered by this document.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 15118-2:2022(Main)
Road vehicles - Vehicle-to-grid communication interface - Part 2: Network and application protocol requirements (ISO/DIS 15118-2:2022)
prEN ISO 15118-2

ISO 15118-2:2014 specifies the communication between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV) and the Electric Vehicle Supply Equipment. The application layer message set defined in ISO 15118-2:2014 is designed to support the energy transfer from an EVSE to an EV. ISO 15118-1 contains additional use case elements describing the bidirectional energy transfer. The implementation of these use cases requires enhancements of the application layer message set defined herein.
The purpose of ISO 15118-2:2014 is to detail the communication between an EV (BEV or a PHEV) and an EVSE. Aspects are specified to detect a vehicle in a communication network and enable an Internet Protocol (IP) based communication between EVCC and SECC.
ISO 15118-2:2014 defines messages, data model, XML/EXI based data representation format, usage of V2GTP, TLS, TCP and IPv6. In addition, it describes how data link layer services can be accessed from a layer 3 perspective. The Data Link Layer and Physical Layer functionality is described in ISO 15118-3.

  • Draft
    370 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 15118-4:2021(Main)
Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO/DIS 15118-4:2021)
prEN ISO 15118-4

No scope available yet

  • Draft
    1584 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15118-9:2023(Main)
Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022)
EN ISO 15118-9:2023

This document specifies conformance tests in the form of an abstract test suite (ATS) for a system under test (SUT) implementing an electric-vehicle or supply-equipment communication controller (EVCC or SECC) with support for WLAN-based high-level communication (HLC) according to ISO 15118 8 and against the background of ISO 15118-1. These conformance tests specify the testing of capabilities and behaviours of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118 8 and against what the implementer states the SUT implementation's capabilities are.
The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118 8. The behaviour tests of the ATS examine an implementation as thoroughly as practical over the full range of dynamic conformance requirements defined in ISO 15118 8 and within the capabilities of the SUT (see NOTE below).
A test architecture is described in correspondence to the ATS. The abstract test cases in this document are described leveraging this test architecture and are specified in descriptive tabular format for the ISO/OSI physical and data link layers (layers 1 and 2).
In terms of coverage, this document only covers normative sections and requirements in ISO 15118 8. This document can additionally refer to specific tests for requirements on referenced standards (e.g. IEEE, or industry consortia standards, like WiFi Alliance) as long as they are relevant in terms of conformance for implementations according to ISO 15118 8. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118 8. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the abstract test cases defined in this document only consider the communication protocol and the system's behaviour defined ISO 15118 8. The power flow between the EVSE and the EV is not considered.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15118-20:2022(Main)
Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements (ISO 15118-20:2022)
EN ISO 15118-20:2022

This document specifies the communication between the electric vehicle (EV), including battery electric
vehicle (BEV) and plug-in hybrid electric vehicle (PHEV), and the electric vehicle supply equipment
(EVSE). The application layer messages defined in this document are designed to support the electricity
power transfer between an EV and an EVSE.
This document defines the communication messages and sequence requirements for bidirectional power
transfer.
This document furthermore defines requirements of wireless communication for both conductive
charging and wireless charging as well as communication requirements for automatic connection device
and information services about charging and control status.
The purpose of this document is to detail the communication between an electric vehicle communication
controller (EVCC) and a supply equipment communication controller (SECC). Aspects are specified to
detect a vehicle in a communication network and enable an Internet Protocol (IP) based communication
between the EVCC and the SECC.
This document defines messages, data model, XML/EXI-based data representation format, usage of
V2GTP, TLS, TCP and IPv6. These requirements belong to the 3rd until the 7th OSI layer model. In addition,
the document describes main service sequences of conductive charging, wireless power transfer and
bidirectional power transfer, and how data link layer services can be accessed from an OSI layer 3
perspective.

  • Standard
    570 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    571 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15118-8:2020(Main)
Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2020)
EN ISO 15118-8:2020

This document specifies the requirements of the physical and data link layer of a wireless High Level
Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment
(EVSE). The wireless communication technology is used as an alternative to the wired communication
technology as defined in ISO 15118-3.
It covers the overall information exchange between all actors involved in the electrical energy exchange.
ISO 15118 (all parts) are applicable for conductive charging as well as Wireless Power Transfer (WPT).
For conductive charging, only EVSEs compliant with “IEC 61851-1 modes 3 and 4” and supporting HLC
are covered by this document. For WPT, charging sites according to IEC 61980 (all parts) and vehicles
according to ISO 19363 are covered by this document.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 15118-2:2022(Main)
Road vehicles - Vehicle-to-grid communication interface - Part 2: Network and application protocol requirements (ISO/DIS 15118-2:2022)
prEN ISO 15118-2

ISO 15118-2:2014 specifies the communication between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV) and the Electric Vehicle Supply Equipment. The application layer message set defined in ISO 15118-2:2014 is designed to support the energy transfer from an EVSE to an EV. ISO 15118-1 contains additional use case elements describing the bidirectional energy transfer. The implementation of these use cases requires enhancements of the application layer message set defined herein.
The purpose of ISO 15118-2:2014 is to detail the communication between an EV (BEV or a PHEV) and an EVSE. Aspects are specified to detect a vehicle in a communication network and enable an Internet Protocol (IP) based communication between EVCC and SECC.
ISO 15118-2:2014 defines messages, data model, XML/EXI based data representation format, usage of V2GTP, TLS, TCP and IPv6. In addition, it describes how data link layer services can be accessed from a layer 3 perspective. The Data Link Layer and Physical Layer functionality is described in ISO 15118-3.

  • Draft
    370 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 15118-4:2021(Main)
Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO/DIS 15118-4:2021)
prEN ISO 15118-4

No scope available yet

  • Draft
    1584 pages
    English language
    sale 10% off
    e-Library read for
    1 day