SIST EN 13630-8:2002

Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses

This European Standard specifies a method for determining the resistance to water of flexible plastics-coated detonating cords, flexible fibrous-overbraided detonating cords and water-resistant safety fuses.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicheheitsanzündschnüre - Teil 8: Bestimmung der Wasserfestigkeit von Sprengschnüren und Sicherheitsanzündschnüren

Explosifs a usage civil - Cordeaux détonants et meches de sureté - Partie 8: Détermination de la résistance a l'eau des cordeaux détonants et meches de sureté

La présente Norme européenne spécifie une méthode de détermination de la résistance a l'eau des cordeaux détonants flexibles recouverts de plastique, des cordeaux détonants flexibles sous fibre tressée et des meches de sureté résistantes a l'eau.

Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 8. del: Ugotavljanje odpornosti detonacijskih in počasi gorečih vžigalnih vrvic proti vodi

General Information

• Status: Published
• Publication Date: 30-Nov-2002
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2002
• Due Date: 01-Dec-2002
• Completion Date: 01-Dec-2002
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: TP072 - Pravilnik o tehničnih in varnostnih zahtevah, obrazcih ter evidencah za eksplozive in pirotehnične izdelke
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: EN 13630-8:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses

Relations

• Revises: oSIST prEN 13630-8:2021 - Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 13630-8:2021 - Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 13630-8:2021 - Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses
• Effective Date: 01-Apr-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRGLExplosivstoffe für zivile Zwecke - Sprengschnüre und Sicheheitsanzündschnüre - Teil 8: Bestimmung der Wasserfestigkeit von Sprengschnüren und SicherheitsanzündschnürenExplosifs a usage civil - Cordeaux détonants et meches de sureté - Partie 8: Détermination de la résistance a l'eau des cordeaux détonants et meches de suretéExplosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13630-8:2002SIST EN 13630-8:2002en01-december-2002SIST EN 13630-8:2002SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13630-8September 2002ICS 71.100.30English versionExplosives for civil uses - Detonating cords and safety fuses -Part 8: Determination of resistance to water of detonating cordsand safety fusesExplosifs à usage civil - Cordeaux détonants et mèches desûreté - Partie 8: Détermination de la résistance à l'eau descordeaux détonants et mèches de sûretéExplosivstoffe für zivile Zwecke - Sprengschnüre undSicheheitsanzündschnüre - Teil 8: Bestimmung derWasserfestigkeit von Sprengschnüren undSicherheitsanzündschnürenThis European Standard was approved by CEN on 11 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13630-8:2002 E



EN 13630-8:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Immersion test for detonating cords.45Immersion test for safety fuses.66Test report.7Annex A (informative)
Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9



EN 13630-8:2002 (E)3ForewordThis document (EN 13630-8:2002) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard is one of a series of standards on Explosives for civil uses – Detonating cords and safetyfuses. The other parts of this series are:prEN 13630-1Part 1: Requirements.EN 13630-2Part 2: Determination of thermal stability of detonating cords and safety fuses.EN 13630-3Part 3: Determination of sensitiveness to friction of the core of detonating cords.EN 13630-4Part 4: Determination of sensitiveness to impact of detonating cords.prEN 13630-5Part 5: Determination of resistance to abrasion of detonating cords.EN 13630-6Part 6: Determination of resistance to tension of detonating cords.EN 13630-7Part 7: Determination of reliability of initiation of detonating cords.prEN 13630-9Part 9: Determination of transmission of detonation from detonating cord to detonating cord.WI 00321088Part 10: Determination of initiating capability of detonating cords.EN 13630-11Part 11: Determination of velocity of detonation of detonating cords.EN 13630-12Part 12: Determination of burning duration of safety fu
...