SIST EN ISO 105-E12:1999

Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:1989)

This part of EN 20105 specifies a method for determining the resistance of the colour of wool and part-wool textiles to the action of soap and sodium carbonate solutions used in alkaline milling.

Textilien - Farbechtheitsprüfungen - Teil E12: Farbechtheit gegen Walken: Alkalische Walke (ISO 105-E12:1989)

Textiles - Essais de solidité des teintures - Partie E12: Solidité des teintures au foulon: Foulon alcalin (ISO 105-E12:1989)

Tekstilije - Preskušanje barvne obstojnosti - Del E12: Barvna obstojnost proti valjanju: alkalno valjanje (ISO 105-E12:1989)

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-1999
• Withdrawal Date: 15-Jul-2012
• ICS: 59.080.01 - Textiles in general
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Jul-2012
• Due Date: 08-Aug-2012
• Completion Date: 16-Jul-2012
• Ref Project: EN ISO 105-E12:1997 - Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:1989)

Relations

• Amended By: SIST EN ISO 105-E12:1999/A1:2003 - Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:1997/Amd 1:2002)
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN ISO 105-E12:2012 - Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010)
• Effective Date: 01-Sep-2012
• Amended By: SIST EN ISO 105-E12:1999/A1:2003 - Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:1997/Amd 1:2002)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilije - Preskušanje barvne obstojnosti - Del E12: Barvna obstojnost proti valjanju: alkalno valjanje (ISO 105-E12:1989)Textilien - Farbechtheitsprüfungen - Teil E12: Farbechtheit gegen Walken: Alkalische Walke (ISO 105-E12:1989)Textiles - Essais de solidité des teintures - Partie E12: Solidité des teintures au foulon: Foulon alcalin (ISO 105-E12:1989)Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:1989)59.080.01Tekstilije na splošnoTextiles in generalICS:Ta slovenski standard je istoveten z:EN ISO 105-E12:1997SIST EN ISO 105-E12:1999en01-marec-1999SIST EN ISO 105-E12:1999SLOVENSKI
STANDARD



SIST EN ISO 105-E12:1999



SIST EN ISO 105-E12:1999



SIST EN ISO 105-E12:1999



SIST EN ISO 105-E12:1999



SIST EN ISO 105-E12:1999



INTERNATIONAL STANDARD 1 OSEI 2 Third edi tion 19894 2-l 5 Textiles - Tests for colour fastness - Part El2 : Colour fastness to milling: Alkaline milling Textiles - Essais de soliditb des teintures - Partie El2 : Soliditb des teintures au foulen: Foulen alcalin Reference number ISO 105-E12:1989(E) SIST EN ISO 105-E12:1999



ISO 105E12:1989(E) Foreword ISO (the International Organisation for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 105.El2 was prepared by Technical Commit- tee ISO/TC 38, Textiles. This third edition cancels and replaces the second edition (ISO 105-E12:1987), of which it constitutes a technical revision. ISO 105 was previously published in 13 “parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Esch part contained a series of “sections”, each designated by the re- spective part letter and by a two-digit serial number (e.g. “Section AOI”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A complete list of these pat-ts is given in ISO 105-AOI. 0 ISO 1989 All rights reserved. No part of this publication may be reproduced or utllired in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland SIST EN ISO 105-E12:1999



INTERNATIONAL STANDARD ISO 105E12:1989(E) Textiles - Tests for colour fastness - Part El2 : Colour fastness to milling: Alkaline milling 1 Scope This part of ISO dO5 specifies a method for deter- mining the resistance of the colour of wool and Part-wool textiles to the action of soap and sodium carbonate solutions used in alkaline milling. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this patt of ISO 105. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid Inter- national Standards. ISO 105-A01:1989, Textiles - Tests for co1our fast- ness - Part AN: General principles of testing. ISO 105-A02:1987, Textiles - Tests for colour fast- ness -- Part A02: Grey scale for assessing Change in colour. ISO 105-A03:1987, Textiles - Tests for colour fast- ness - Part AU3: Grey scale for assessing staining. ISO 105-F:1985, Textiles - Tests for colour fasfness - Part F: Standard adjacent fabrics. ISO 1050F10:1989, Textiles - Tests for colour fastness - Part FIO: Specifkation for adjacent fabric: Multifi- bre. 3 Prlnciple A specimen of the textile in contact with one or two specified adjacent fabrics is milled in a jar contain- ing steel balls and a Solution of soap and sodium carbonate. The severity of the action is controlled by means of a test-control dyeing milled separately in the Same way. After rinsing and drying, the Change in colour of the specimen and the staining of the adjacent fabrics are assessed with the grey scales. 4 Apparatus and reagents 4.1 Suitable mechanical device (see 8.1), consisting of a water bath containing a rotatable shaft which supports, radially, glass or stainless steel con- tainers (75 mm + 5 mm diameter x 125 mm + 10 mm -high) of approximately 550 ml +-50 ml capacity, the bottom of the con- tainers b ...