Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for categorie C - Indoor controlled environment (IEC 61753-089-02:2022)

This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre-optic pigtailed wide wavelength division multiplexing (WWDM) device for monitoring passive optical networks (PON) using an optical time-domain reflectometer (OTDR) satisfies in order to be categorised as meeting the requirements of categorie C (Indoor controlled environment), as defined in annex A of IEC 61753-1 2018. WWDM is defined in IEC 62074-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 089-2: Nicht mit Steckverbindern versehene bidirektionale OTDR-Überwachungs-WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung (IEC 61753-089-02:2022)

Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 089-02: WWDM de surveillance par OTDR bidirectionnel unimodal non connectorisé de catégorie C - Environnement intérieur contrôlé (IEC 61753-089-02:2022)

IEC 61753-089-02: 2022 contient les exigences minimales initiales d’essai et de mesure ainsi que les sévérités auxquelles satisfait un dispositif de multiplexage par répartition en longueur d'onde large (WWDM) fibronique équipé de fibres amorces destiné à la surveillance des réseaux optiques passifs (PON, Passive Optical Networks) au moyen d'un réflectomètre optique dans le domaine temporel (OTDR) pour être classé comme répondant aux exigences de la catégorie C (environnement intérieur contrôlé), selon la définition donnée à l'Annexe A de l'IEC 61753­1:2018. Le WWDM est défini dans l'IEC 62074-1.
Cette première édition annule et remplace l'IEC 61753-089-2 parue en 2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: modification des conditions d'essai pour leur harmonisation avec l'IEC 61753‑1:2018.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 089-02. del: Enorodni dvosmerni OTDR nadzorni WWDM brez konektorja za kategorijo C - Notranje nadzorovano okolje (IEC 61753-089-02:2022)

General Information

Status
Published
Publication Date
23-Oct-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-Sep-2022
Due Date
04-Dec-2022
Completion Date
24-Oct-2022

Relations

Buy Standard

Standard
EN IEC 61753-089-02:2022
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-089-02:2022
01-december-2022
Nadomešča:
SIST EN 61753-089-2:2013
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 089-02. del:
Enorodni dvosmerni OTDR nadzorni WWDM brez konektorja za kategorijo C -
Notranje nadzorovano okolje (IEC 61753-089-02:2022)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for
categorie C - Indoor controlled environment (IEC 61753-089-02:2022)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter -
Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 089-2: Nicht mit
Steckverbindern versehene bidirektionale OTDR-Überwachungs-WWDM-Bauteile für die
Kategorie C - Kontrollierte Umgebung (IEC 61753-089-02:2022)
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance -
Partie 089-02: WWDM de surveillance par OTDR bidirectionnel unimodal non
connectorisé de catégorie C - Environnement intérieur contrôlé (IEC 61753-089-02:2022)
Ta slovenski standard je istoveten z: EN IEC 61753-089-02:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-089-02:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-089-02:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-089-02:2022


EUROPEAN STANDARD EN IEC 61753-089-02

NORME EUROPÉENNE

EUROPÄISCHE NORM September 2022
ICS 33.180.20 Supersedes EN 61753-089-2:2013
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 089-02: Non-connectorised single-
mode bidirectional OTDR monitoring WWDM for category C -
Indoor controlled environment
(IEC 61753-089-02:2022)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 089-02: Bauteile - Betriebsverhalten - Teil 089-2: Nicht mit
WWDM de surveillance par OTDR bidirectionnel unimodal Steckverbindern versehene bidirektionale OTDR-
non connectorisé de catégorie C - Environnement intérieur Überwachungs-WWDM-Bauteile für die Kategorie C -
contrôlé Kontrollierte Umgebung
(IEC 61753-089-02:2022) (IEC 61753-089-02:2022)
This European Standard was approved by CENELEC on 2022-09-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-089-02:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-089-02:2022
EN IEC 61753-089-02:2022 (E)
European foreword
The text of document 86B/4626/FDIS, future edition 1 of IEC 61753-089-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-089-
02:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-06-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-09-16
document have to be withdrawn

This document supersedes EN 61753-089-2:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-089-02:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
IEC 61753-089-2:2013 NOTE Harmonized as EN 61753-089-2:2013 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 61753-089-02:2022
EN IEC 61753-089-02:2022 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN IEC 61300-2-14 -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
3

---------------------- Page: 5 ----------------------
SIST EN IEC 61753-089-02:2022
EN IEC 61753-089-02:2022 (E)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN IEC 61300-3-7 -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures - Part 3-20:
Examinations and measurements -
Directivity of fibre optic branching devices
IEC 61753-1 2018 Fibre optic interconnecting devices and EN IEC 61753-1 2018
passive components - Performance
standard - Part 1: General and guidance
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices - Part 1: Generic specification
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices

4

---------------------- Page: 6 ----------------------
SIST EN IEC 61753-089-02:2022



IEC 61753-089-02

®


Edition 1.0 2022-08




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Fibre optic interconnecting devices and passive components – Performance

standard –

Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring

WWDM for category C – Indoor controlled environment



Dispositifs d'interconnexion et composants passifs fibroniques – Norme de


performance –

Partie 089-02: WWDM de surveillance par OTDR bidirectionnel unimodal non

connectorisé de catégorie C – Environnement intérieur contrôlé











INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.20 ISBN 978-2-8322-5224-6




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 61753-089-02:2022
– 2 – IEC 61753-089-02:2022 © IEC 2022
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 6
5 Test report . 7
6 Performance requirements. 7
6.1 Reference components . 7
6.2 Dimensions . 7
6.3 Sample size . 7
6.4 Test details and requirements . 7
Annex A (normative) Sample size . 12
Bibliography . 13

Table 1 – Single-mode spectral bands . 7
Table 2 – Test details and requirements for category C . 8
Table A.1 – Sample size and grouping of tests. 12

---------------------- Page: 8 ----------------------
SIST EN IEC 61753-089-02:2022
IEC FDIS 61753-089-02 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 089-02: Non-connectorised single-mode bidirectional OTDR
monitoring WWDM for category C – Indoor controlled environment

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 61753-089-02 has been prepared by subcommittee 86B: Fibre optic interconnecting
devices and passive components, of IEC technical committee 86: Fibre optics. It is an
International Standard.
This first edition cancels and replaces IEC 61753-089-2 published in 2013. This edition
constitutes a technical revision.
This edition includes the following significant technical change with respect to
IEC 61753-089-2:2013: change of test conditions harmonizing with IEC 61753-1:2018.

---------------------- Page: 9 ----------------------
SIST EN IEC 61753-089-02:2022
– 4 – IEC 61753-089-02:2022 © IEC 2022
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4626/FDIS 86B/4646/RVD

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on the
IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-089-02:2022
IEC FDIS 61753-089-02 © I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.