SIST EN 61755-3-10:2017

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors (IEC 61755-3-10:2016)

This part of IEC 61755 defines certain dimensional limits of a 125 μm diameter single mode
silica fibre optical interface and an alignment bore to meet specific requirements for nonangled
fibre-to-fibre interconnection as defined in IEC 61755-2-1. The silica fibre materials
specified in this document are suitable for use in categories C, U, E and O as defined in
IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-10: Parameter von Steckverbindern mit nicht-dispersionsverschobenen Einmodenfasern mit physikalischem Kontakt - Nicht abgeschrägte Steckverbinder ohne Ferrule mit Ausrichtungsbohrung

Dispositifs d’interconnexion et composants passifs fibroniques - Interfaces optiques de connecteurs pour fibres optiques - Partie 3-10: Paramètres des connecteurs pour fibres unimodales à dispersion non décalée, en contact physique - sans angle, sans férule, à alignement à alésage

IEC 61755-3-10:2016 définit certaines limites dimensionnelles d'une interface optique et d'un alésage d'alignement de fibre unimodale en silice d'un diamètre de 125 mm pour satisfaire aux exigences spécifiques pour les interconnexions fibre à fibre sans angle telles qu'elles sont définies dans l'IEC 61755-2-1. Les matériaux des fibres en silice spécifiés dans ce document sont adaptés à une utilisation dans les catégories C, U, E et O comme définies dans l'IEC 61753-1.

Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 3-10. del: Parametri konektorjev za enorodovna vlakna z nepremaknjeno disperzijo, fizično stičnih, nekotnih, brez tulke, s poravnanimi izvrtinami (IEC 61755-3-10:2016)

Ta del standarda IEC 61755 določa nekatere omejitve velikosti enorodovnih optičnih vmesnikov iz kremenčevih vlaken s premerom 125-μm s poravnanimi izvrtinami za zagotavljanje skladnosti z določenimi zahtevami za spajanje nekotnih vlaken, kot je opredeljeno v standardu IEC 61755-2-1. Kremenčeva vlakna, ki so opredeljena v tem dokumentu, so primerna za uporabo v kategorijah C, U, E in O, kot je opredeljeno v standardu IEC 61753-1.

General Information

• Status: Published
• Publication Date: 13-Apr-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-Mar-2017
• Due Date: 03-Jun-2017
• Completion Date: 14-Apr-2017
• Ref Project: EN 61755-3-10:2017 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61755-3-10:2017
01-maj-2017
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNLRSWLþQLKNRQHNWRUMHY
GHO3DUDPHWULNRQHNWRUMHY]DHQRURGRYQDYODNQD]QHSUHPDNQMHQRGLVSHU]LMR
IL]LþQRVWLþQLKQHNRWQLKEUH]WXONHVSRUDYQDQLPLL]YUWLQDPL,(&

Fibre optic interconnecting devices and passive components - Connector optical
interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode
physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors (IEC
61755-3-10:2016)
Ta slovenski standard je istoveten z: EN 61755-3-10:2017
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61755-3-10:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61755-3-10:2017

---------------------- Page: 2 ----------------------

SIST EN 61755-3-10:2017


EUROPEAN STANDARD EN 61755-3-10

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2017
ICS 33.180.20

English Version
Fibre optic interconnecting devices and passive components -
Connector optical interfaces - Part 3-10: Connector parameters
of non-dispersion shifted single mode physically contacting fibres
- Non-angled, ferrule-less, bore alignment connectors
(IEC 61755-3-10:2016)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Interfaces optiques de connecteurs pour fibres Bauteile - Optische Schnittstellen für Lichtwellenleiter-
optiques - Partie 3-10: Paramètres des connecteurs pour Steckverbinder - Teil 3-10: Parameter von Steckverbindern
fibres unimodales à dispersion non décalée, en contact mit nicht-dispersionsverschobenen Einmodenfasern mit
physique - sans angle, sans férule, à alignement à alésage physikalischem Kontakt - Nicht abgeschrägte
(IEC 61755-3-10:2016) Steckverbinder ohne Ferrule mit Ausrichtungsbohrung
(IEC 61755-3-10:2016)
This European Standard was approved by CENELEC on 2017-01-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61755-3-10:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61755-3-10:2017
EN 61755-3-10:2017
European foreword
The text of document 86B/3990A/CDV, future edition 1 of IEC 61755-3-10, prepared by SC 86B ”Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61755-3-10:2017.

The following dates are fixed:
(dop) 2017-10-12
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-01-12
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61755-3-10:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60793-2-50:2015 NOTE Harmonized as EN 60793-2-50:2016 (not modified).
IEC 61754 Series NOTE Harmonized as EN 61754 Series.
IEC 61755-1 NOTE Harmonized as EN 61755-1.
2

---------------------- Page: 4 ----------------------

SIST EN 61755-3-10:2017
EN 61755-3-10:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 61753-1 -  Fibre optic interconnecting devices EN 61753-1 -
and passive components performance
standard -
Part 1: General and guidance for
performance standards
IEC 61755-2-1 2006 Fibre optic connector optical interfaces - EN 61755-2-1 2006
Part 2-1: Optical interface standard single
mode non-angled physically contacting
fibres

3

---------------------- Page: 5 ----------------------

SIST EN 61755-3-10:2017

---------------------- Page: 6 ----------------------

SIST EN 61755-3-10:2017



IEC 61755-3-10

®


Edition 1.0 2016-12




INTERNATIONAL



STANDARD



















Fibre optic interconnecting devices and passive components – Connector

optical interfaces –

Part 3-10: Connector parameters of non-dispersion shifted single mode


physically contacting fibres – Non-angled, ferrule-less, bore alignment

connectors























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.20 ISBN 978-2-8322-3687-1



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61755-3-10:2017
– 2 – IEC 61755-3-10:2016 © IEC 2016
CONTENTS

FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
5 Interface parameters . 6
Bibliography . 9

Figure 1 – Fibre end face dimensions . 7
Figure 2 – Alignment bore dimensions . 8

Table 1 – Optical interface parameter values for a 125 µm diameter optical fibre and
an alignment bore . 8

---------------------- Page: 8 ----------------------

SIST EN 61755-3-10:2017
IEC 61755-3-10:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS – CONNECTOR OPTICAL INTERFACES –

Part 3-10: Connector parameters of non-dispersion shifted
single mode physically contacting fibres – Non-angled,
ferrule-less, bore alignment connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
T
...