SIST EN 442-3:2004
(Main)Radiators and convectors - Part 3: Evaluation of conformity
Radiators and convectors - Part 3: Evaluation of conformity
This European Standard specifies the procedures for evaluating the conformity of radiators/convectors to EN 442-1. It specifies the procedures and methods for the initial evaluation and the controls required to maintain conformity.
Radiatoren und Konvektoren - Teil 3: Konformitätsbewertung
Diese Europäische Norm macht genauere Angaben zu Verfahrensweisen zur Konformitätsbewertung von Radiatoren/Konvektoren nach EN 442-1. Sie führt Vorgehen und Verfahren für die Erstbestätigung und die für eine aufrechtzuerhaltende Konformität erforderlichen Kontrollen an.
Radiateurs et convecteurs - Partie 3: Evaluation de la conformité
La présente Norme européenne spécifie les procédures d'évaluation de la conformité des radiateurs/convecteurs a l'EN 442-1. Elle prescrit les procédures et les méthodes d'évaluation initiale ainsi que les contrôles nécessaires a la permanence de la conformité.
Ogrevala in konvektorji - 3. del: Ocenjevanje skladnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ogrevala in konvektorji - 3. del: Ocenjevanje skladnostiRadiatoren und Konvektoren - Teil 3: KonformitätsbewertungRadiateurs et convecteurs - Partie 3: Evaluation de la conformitéRadiators and convectors - Part 3: Evaluation of conformity91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 442-3:2003SIST EN 442-3:2004en,fr,de01-januar-2004SIST EN 442-3:2004SLOVENSKI
STANDARDSIST EN 442-3:19971DGRPHãþD
SIST EN 442-3:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 442-3September 2003ICS 91.140.10Supersedes EN 442-3:1997English versionRadiators and convectors - Part 3: Evaluation of conformityRadiateurs et convecteurs - Partie 3: Evaluation de laconformitéRadiatoren und Konvektoren - Teil 3:KonformitätsbewertungThis European Standard was approved by CEN on 7 August 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 442-3:2003 ESIST EN 442-3:2004
EN 442-3:2003 (E)2ContentsPageForeword.3Introduction.41Scope.52Normative References.53Evaluation of conformity.54Initial evaluation.65Maintenance of conformity.7Bibliography.8SIST EN 442-3:2004
EN 442-3:2003 (E)3ForewordThis document (EN 442-3:2003) has been prepared by Technical Committee CEN/TC 130 “Space heatingappliances without integral heat sources”, the secretariat of which is held by UNI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2004, and conflicting national standards shall be withdrawn at the latest byMarch 2004.This document supersedes EN 442-3:1997.This European Standard of radiators and convectors consists of the following parts:EN 442-1, Radiators and convectors – Part 1: Technical specifications and requirements;EN 442-2, Radiators and convectors – Part 2: Test methods and rating;EN 442-3, Radiators and convectors – Part 3: Evaluation of conformity.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 442-3:2004
EN 442-3:2003 (E)4IntroductionThis European Standard results from the recognition that the heating appliances falling into the scope hereinafterstated are traded on the basis of their thermal output.To evaluate and compare different appliances, it is therefore essential to refer to a single stipulated value,hereinafter called the standard thermal output.Considering EN 442-1 should become a harmonized standard with reference to Mandate M/129 of the EU Directive89/106 “CPD” and the need to further treat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.