SIST EN 62087:2003
(Main)Methods of measurement for the power consumption of audio, video and related equipment
Methods of measurement for the power consumption of audio, video and related equipment
Specifies methods of measurement for the power consumption of TV receivers, VCRs, Set Top Boxes (STBs), audio equipment and multi-function equipment for consumer use. Defines the different modes of operation relevant for the measurement of power consumption.
Messverfahren für den Energieverbrauch von Audio-, Video- und verwandten Geräten
Méthodes de mesure de l'énergie consommée des appareils audio, vidéo et analogues
Specifies methods of measurement for the power consumption of TV receivers, VCRs, Set Top Boxes (STBs), audio equipment and multi-function equipment for consumer use. Defines the different modes of operation relevant for the measurement of power consumption.
Methods of measurement for the power consumption of audio, video and related equipment (IEC 62087:2002)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Methods of measurement for the power consumption of audio, video and related equipment (IEC 62087:2002)Messverfahren für den Energieverbrauch von Audio-, Video- und verwandten GerätenMéthodes de mesure de l'énergie consommée des appareils audio, vidéo et analoguesMethods of measurement for the power consumption of audio, video and related equipment33.160.01Avdio, video in avdiovizualni sistemi na splošnoAudio, video and audiovisual systems in general17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN 62087:2003SIST EN 62087:2003en01-december-2003SIST EN 62087:2003SLOVENSKI
STANDARDSIST EN 50301:20031DGRPHãþD
SIST EN 62087:2003
EUROPEAN STANDARD
EN 62087 NORME EUROPÉENNE EUROPÄISCHE NORM
September 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62087:2003 E
ICS 33.160.01 Supersedes EN 50301:2001
English version
Methods of measurement for the power consumption
of audio, video and related equipment (IEC 62087:2002)
Méthodes de mesure de l'énergie consommée des appareils audio,
vidéo et analogues (CEI 62087:2002)
Messverfahren für den Energieverbrauch von Audio-, Video- und verwandten Geräten (IEC 62087:2002)
This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 62087:2003
EN 62087:2003 - 2 - Foreword The text of the International Standard IEC 62087:2002, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 62087 on 2003-07-01 without any modification. This European Standard supersedes EN 50301:2001. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-07-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-07-01 Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, Annex ZA is normative and Annex A is informative. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62087:2002 was approved by CENELEC as a European Standard without any modification. __________
SIST EN 62087:2003
- 3 - EN 62087:2003 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year
Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
EN 50049-1
- 1) IEC 60107-1 1997 Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations - Measurements at radio and video frequencies
EN 60107-1 1997 IEC 61938 1996 Audio, video and audiovisual systems - Interconnections and matching values - Preferred matching values of analogue signals
EN 61938 + corr. February 1997 1997
1) Undated reference.
SIST EN 62087:2003
SIST EN 62087:2003
INTERNATIONALSTANDARDIEC62087First edition2002-03Methods of measurement for the powerconsumption of audio, video and relatedequipment IEC 2002
Copyright - all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chNFor price, see current cataloguePRICE CODECommission Electrotechnique InternationaleInternational Electrotechnical Commission
SIST EN 62087:2003
– 2 –62087 IEC:2002(E)CONTENTSFOREWORD.41Scope.52Normative references.53Terms, definitions and abbreviations.53.1Definitions.53.2Abbreviations.64Specification of operating modes.75General method of measurement.85.1General measuring conditions.85.1.1Power supply.85.1.2Environmental conditions.85.1.3Adjustment of controls.85.1.4Input signals.85.2General measurement procedure.86Measuring conditions for television receivers.96.1Input signal.96.2RF input signal.96.3Baseband input signal level.96.4Video test signal.96.5Audio test signal(s).96.6Loading of terminals.96.7On mode.96.8Standby mode.96.9Off mode.97Measuring conditions for video recording equipment.107.1Input signal.107.2RF input signal.107.3Baseband input signal level.107.4On mode.107.5Standby mode.107.6Off mode.108STB.108.1Measuring conditions for STB for digital cable transmissions or digitalterrestrial broadcast transmissions.108.1.1Input signal.108.1.2RF input signal.108.1.3Video test signal.108.1.4Three vertical bar signal (see 6.4) Audio test signal(s).108.1.5On mode.108.1.6Standby mode.108.1.7Off mode.108.2STB for analogue and digital satellite broadcast.118.2.1General.118.2.2Measuring conditions.11SIST EN 62087:2003
62087 IEC:2002(E)– 3 –9Audio equipment.119.1General.119.2Measuring conditions.129.2.1Input signal.129.2.2RF input signal.129.2.3Auxiliary input signal.129.2.4Reproduction of tape or disc.129.2.5Audio test signals.129.2.6Loading of terminals.129.2.7Output level.129.2.8On modes to be considered.139.2.9Standby mode.139.2.10Off mode.1310Multi-function equipment.1310.1General.1310.2Measuring conditions for TV-VCR combination.1310.3TV-STB combinations.1310.3.1General.1310.3.2Measuring conditions for TV-satellite receiver combination.13Annex A (informative)
Verification procedure.14SIST EN 62087:2003
– 4 –62087 IEC:2002(E)INTERNATIONAL ELECTROTECHNICAL COMMISSION____________METHODS OF MEASUREMENT FOR THE POWER CONSUMPTIONOF AUDIO, VIDEO AND RELATED EQUIPMENTFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)
In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 62087 has been prepared by IEC technical committee100: Audio,video and multimedia systems and equipment.The text of this standard is based on the following documents:CDVReport on voting100/250/CDV100/449/RVCFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.The committee has decided that the contents of this publication will remain unchanged until2004. At this date, the publication will be•reconfirmed;•withdrawn;•replaced by a revised edition, or•amended.SIST EN 62087:2003
62087 IEC:2002(E)– 5 –METHODS OF MEASUREMENT FOR THE POWER CONSUMPTIONOF AUDIO, VIDEO AND RELATED EQUIPMENT1 ScopeThis International Standard specifies methods of measurement for the power consumption ofTV receivers, VCRs, Set Top Boxes (STBs), audio equipment and multi-function equipmentfor consumer use.Moreover the different modes of operation which are relevant for the power consumption aredefined.The methods of measurement are only applicable for equipment which can be connected tothe mains.T
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.