SIST EN 13480-2:2002/A1:2011

Metallic industrial piping - Part 2: Materials

This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.

Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe

Tuyauteries industrielles métalliques - Partie 2 : Matériaux

Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1

Ta del EN 13480 zajema zahteve za materiale (vključno z obloženimi materiali) za industrijske cevovode in podpore, ki jih zajema EN 13480-1, narejene iz kovinskih materialov, in je trenutno omejen na jekla z zadostno preoblikovalnostjo pod razponom lezenja. Določa ocenjevanje skladnosti za te materiale. Zagotavlja tudi pravila za vzpostavitev tehničnih pogojev dostave materialov za industrijske cevovode.

General Information

• Status: Withdrawn
• Publication Date: 09-May-2011
• Withdrawal Date: 01-Oct-2012
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-Sep-2012
• Due Date: 17-Oct-2012
• Completion Date: 02-Oct-2012
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13480-2:2002/A1:2010 - Metallic industrial piping - Part 2: Materials

Relations

• Amends: SIST EN 13480-2:2002 - Metallic industrial piping - Part 2: Materials
• Effective Date: 01-Jun-2011
• Replaced By: SIST EN 13480-2:2012 - Metallic industrial piping - Part 2: Materials
• Effective Date: 01-Oct-2012
• Amends: SIST EN 13480-2:2002 - Metallic industrial piping - Part 2: Materials
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-2:2002/A1:2011
01-junij-2011
Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2 : Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2002/A1:2010
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-2:2002/A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-2:2002/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 13480-2:2002/A1:2011


EUROPEAN STANDARD
EN 13480-2:2002/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 23.040.01
English Version
Metallic industrial piping - Part 2: Materials
Tuyauteries industrielles métalliques - Partie 2 : Matériaux Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
This amendment A1 modifies the European Standard EN 13480-2:2002; it was approved by CEN on 16 April 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2002/A1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Contents Page
Foreword .3
Foreword .4
4 Requirements for materials to be used for pressure-bearing parts .4
4.3.1 European Standards .4
Annex A (normative) Grouping system for steels for pressure equipment .5
Annex D (informative) European steels for pressure purposes .7
D.1 European Standards for steels and steel components for pressure purposes .7
D.2 European standardised steels grouped according to product forms .8
Annex ZA (informative) . 31

2

---------------------- Page: 4 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Foreword
This document (EN 13480-2:2002/A1:2010) has been prepared by Technical Committee CEN/TC 267
“Metallic industrial piping”, the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 13480-3:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national
standards shall be withdrawn at the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
This document includes the text of the amendment itself. The corrected pages of EN 13480-2 will be delivered
as issue 13 of the standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Foreword
The text of the foreword shall include reference to EN 13480-8:
Part 8: Additional requirements for aluminium and aluminium alloy piping

4 Requirements for materials to be used for pressure-bearing parts
The text of 4.3.1 shall be changed to read as follows:
4.3.1 European Standards
The European Standards for plates, strips, bars, tubes, forgings, fittings and castings for pressure purposes
shall be used.
NOTE 1 Table D.1-1 provides an informative summary of European Materials Standards that are referred to in and of
European Standards covering steel components of pressure parts.
NOTE 2 Table D.2-1 provides an informative summary regarding materials for pressure purposes specified in
harmonised standards grouped according to product forms.
Special provisions due to fabrication and operation shall be taken into account, if appropriate.





The text of Annex A shall be rewritten as follows (see next pages):
4

---------------------- Page: 6 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Annex A
(normative)

Grouping system for steels for pressure equipment
Steels shall be grouped as shown in Table A.1. The figures given in group 1 are referring to the ladle analysis
of the materials. The figures given in group 4 to 10 are based on the element content used in the designation
of the alloys.
Table A.1 — Grouping system for steels (extract from CR ISO 15608:2000)
Sub-
Group Type of steel
group
2
a
1
Steels with a specified minimum yield strength R ≤ 460 N/mm and with analysis in %:
e
C ≤ 0,25
Si ≤ 0,60
Mn ≤ 1,70
b
Mo ≤ 0,70
S ≤ 0,045
P ≤ 0,045
b
Cu ≤ 0,40
b
Ni ≤ 0,5
b
Cr ≤ 0,3 (0,4 for castings)
Nb ≤ 0,05
b
V ≤ 0,12
Ti ≤ 0,05
2
1.1 Steels with a specified minimum yield strength R ≤ 275 N/mm
e
2 2
1.2 Steels with a specified minimum yield strength 275 N/mm < R ≤ 360 N/mm
e
2
1.3 Normalised fine grain steels with a specified minimum yield strength R > 360 N/mm
e
1.4 Steels with improved atmospheric corrosion resistance whose analysis may exceed the
requirements for the single elements as indicated under 1
2 Thermomechanically treated fine grain steels and cast steels with a specified minimum yield
2
strength R > 360 N/mm
e
2.1 Thermomechanically treated fine grain steels and cast steels with a specified minimum yield
2 2
strength 360 N/mm < R ≤ 460 N/mm
e
2.2 Thermomechanically treated fine grain steels and cast steels with a specified minimum yield
2
strength R > 460 N/mm
e
3 Quenched and tempered steels and precipitation hardened steels except stainless steels with a
2
specified minimum yield strength R > 360 N/mm
e
3.1 Quenched and tempered steels with a specified minimum yield strength
2 2
360 N/mm < R ≤ 690 N/mm
e
2
3.2
Quenched and tempered steels with a specified minimum yield strength R > 690 N/mm
e
3.3 Precipitation hardened steels except stainless steels

5

---------------------- Page: 7 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table A.1 (concluded)
Sub-
Group Type of steel
group
4
Low vanadium alloyed Cr-Mo-(Ni) steels with Mo ≤ 0,7 % and V ≤ 0,1 %
  4.1
Steels with Cr ≤ 0,3 % and Ni ≤ 0,7 %
  4.2
Steels with Cr ≤ 0,7 % and Ni ≤ 1,5 %
c
5
Cr-Mo steels free of vanadium with C ≤ 0,35 %
  5.1
Steels with 0,75 % ≤ Cr ≤ 1,5 % and Mo ≤ 0,7 %
  5.2 Steels with 1,5 % < Cr ≤ 3,5 % and 0,7 < Mo ≤ 1,2 %
  5.3
Steels with 3,5 % < Cr ≤ 7,0 % and 0,4 < Mo ≤ 0,7 %
  5.4 Steels with 7,0 % < Cr ≤ 10 % and 0,7 < Mo ≤ 1,2 %
6 High vanadium alloyed Cr-Mo-(Ni) steels
  6.1
Steels with 0,3 % ≤ Cr ≤ 0,75 %, Mo ≤ 0,7 % and V ≤ 0,35 %
  6.2 Steels with 0,75 % < Cr ≤ 3,5 %, 0,7 % < Mo ≤ 1,2 % and V ≤ 0,35 %
  6.3
Steels with 3,5 % < Cr ≤ 7,0 %, Mo ≤ 0,7 % and 0,45 % ≤ V ≤ 0,55 %
  6.4 Steels with 7,0 % < Cr ≤ 12,5 %, 0,7 % < Mo ≤ 1,2 % and V ≤ 0,35 %
7
Ferritic, martensitic or precipitation hardened stainless steels with C ≤ 0,35 % and
10,5 % ≤ Cr ≤ 30 %
  7.1 Ferritic stainless steels
  7.2 Martensitic stainless steels
  7.3 Precipitation hardened stainless steels
8 Austenitic steels
  8.1 Austenitic stainless steels with Cr ≤ 19 %
  8.2
Austenitic stainless steels with Cr > 19 %
  8.3 Manganese austenitic stainless steels with 4 % < Mn ≤ 12 %
9
Nickel alloyed steels with Ni ≤ 10 %
  9.1
Nickel alloyed steels with Ni ≤ 3 %
  9.2
Nickel alloyed steels with 3,0 % < Ni ≤ 8 %
  9.3 Nickel alloyed steels with 8,0 % < Ni ≤ 10 %
10 Austenitic ferritic stainless steels (duplex)
10.1
Austenitic ferritic stainless steels with Cr ≤ 24 %
10.2
Austenitic ferritic stainless steels with Cr > 24 %
a
In accordance with the specification of the steel product standards, R may be replaced by R or R .
e p0,2 t0.5
b
A higher value is accepted provided that Cr + Mo + Ni + Cu + V ≤ 0,75 %.
c
"Free of vanadium" means not deliberately added to the material.

The Tables A.2 and A.3 shall be shifted into a new informative Annex D and shall be rewritten as follows:

6

---------------------- Page: 8 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Annex D
(informative)

European steels for pressure purposes
D.1 European Standards for steels and steel components for pressure purposes
Table D.1-1 contains an informative summary on European Standards for steels and steel components for pressure purposes.
Table D.1-1 — European Standards for steels and steel components for pressure purposes
Fine grain steels
Room
Elevated Low
temperature
General Stainless
Thermo-
Product form temperature temperature
a
Quenched
requirements steels
grades
Normalised mechanically
grades grades
and tempered

treated
Plate and strip EN 10028-1 — EN 10028-2 EN 10028-3 EN 10028-5 EN 10028-6 EN 10028-4 EN 10028-7
Rolled bar — — EN 10273 — — — — EN 10272
Seamless tube — EN 10216-1 EN 10216-2 EN 10216-3 — EN 10216-3 EN 10216-4 EN 10216-5
Electric welded tube — EN 10217-1 EN 10217-2 EN 10217-3 — — EN 10217-4 —
Submerged arc
— EN 10217-1 EN 10217-5 EN 10217-3 — — EN 10217-6 —
welded tube
Fusion welded tube — — — — — — — EN 10217-7
Fitting — EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-4
Forging including
EN 10222-1 — EN 10222-2 EN 10222-4 — — EN 10222-3 EN 10222-5
forged bars
Casting EN 10213 — EN 10213 — — — EN 10213 EN 10213
Steel for fastener — — EN 10269 — — — EN 10269 EN 10269
a
 Room temperature values are given in all standards of this table.

     7

---------------------- Page: 9 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
D.2 European standardised steels grouped according to product forms

Table D.2-1 — European standardised steels grouped according to product forms
1 2 3 4 5 6 7 8 9 10
Thickness Material
Heat
European Material mm group
No Product form Material description Grade Notes
g
Standard number to
treatment
min. max.
CR ISO 15608
1 plate and strip EN 10028-2 elevated temperature properties P235GH 1.0345 N 0 250 1.1
2 plate and strip EN 10028-2 elevated temperature properties P265GH 1.0425 N 0 250 1.1
3 plate and strip EN 10028-2 elevated temperature properties P295GH 1.0481 N 0 250 1.2
4 plate and strip EN 10028-2 elevated temperature properties P355GH 1.0473 N 0 250 1.2
e
5 plate and strip EN 10028-2 elevated temperature properties 16Mo3 1.5415 N, NT 0 250 1.2
6 plate and strip EN 10028-2 elevated temperature properties 18MnMo4-5 1.5414 NT 0 150 1.2
7 plate and strip EN 10028-2 elevated temperature properties 18MnMo4-5 1.5414 QT 150 250 1.2
8 plate and strip EN 10028-2 elevated temperature properties 20MnMoNi4-5 1.6311 QT 0 250 3.1
9 plate and strip EN 10028-2 elevated temperature properties 15NiCuMoNb5-6-4 1.6368 NT 0 100 3.1
10 plate and strip EN 10028-2 elevated temperature properties 15NiCuMoNb5-6-4 1.6368 NT, QT 100 150 3.1
11 plate and strip EN 10028-2 elevated temperature properties 15NiCuMoNb5-6-4 1.6368 QT 150 200 3.1
12 plate and strip EN 10028-2 elevated temperature properties 13CrMo4-5 1.7335 NT 0 100 5.1
13 plate and strip EN 10028-2 elevated temperature properties 13CrMo4-5 1.7335 NT,QT 100 150 5.1
14 plate and strip EN 10028-2 elevated temperature properties 13CrMo4-5 1.7335 QT 150 250 5.1
15 plate and strip EN 10028-2 elevated temperature properties 13CrMoSi5-5 1.7336 NT, QT 0 100 5.1
16 plate and strip EN 10028-2 elevated temperature properties 13CrMoSi5-5 1.7336 QT 100 250 5.1
17 plate and strip EN 10028-2 elevated temperature properties 10CrMo9-10 1.7380 NT 0 60 5.2
18 plate and strip EN 10028-2 elevated temperature properties 10CrMo9-10 1.7380 NT,QT 60 100 5.2

8

---------------------- Page: 10 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608
19 plate and strip EN 10028-2 elevated temperature properties 10CrMo9-10 1.7380 QT 100 250 5.2
20 plate and strip EN 10028-2 elevated temperature properties 12CrMo9-10 1.7375 NT,QT 0 250 5.2
21 plate and strip EN 10028-2 elevated temperature properties X12CrMo5 1.7362 NT 0 150 5.3
22 plate and strip EN 10028-2 elevated temperature properties X12CrMo5 1.7362 QT 150 250 5.3
23 plate and strip EN 10028-2 elevated temperature properties 13CrMoV9-10 1.7703 NT 0 150 6.2
24 plate and strip EN 10028-2 elevated temperature properties 13CrMoV9-10 1.7703 QT 150 250 6.2
25 plate and strip EN 10028-2 elevated temperature properties 12CrMoV12-10 1.7767 NT 0 150 6.2
26 plate and strip EN 10028-2 elevated temperature properties 12CrMoV12-10 1.7767 QT 150 250 6.2
27 plate and strip EN 10028-2 elevated temperature properties X10CrMoVNb9-1 1.4903 NT 0 150 6.4
28 plate and strip EN 10028-2 elevated temperature properties X10CrMoVNb9-1 1.4903 QT 150 250 6.4
29 plate and strip EN 10028-3 fine grain steel normalised P275NH 1.0487 N 0 250 1.1
30 plate and strip EN 10028-3 fine grain steel normalised P275NL1 1.0488 N 0 250 1.1
31 plate and strip EN 10028-3 fine grain steel normalised P275NL2 1.1104 N 0 250 1.1
32 plate and strip EN 10028-3 fine grain steel normalised P355N 1.0562 N 0 250 1.2
33 plate and strip EN 10028-3 fine grain steel normalised P355NH 1.0565 N 0 250 1.2
34 plate and strip EN 10028-3 fine grain steel normalised P355NL1 1.0566 N 0 250 1.2
35 plate and strip EN 10028-3 fine grain steel normalised P355NL2 1.1106 N 0 250 1.2
36 plate and strip EN 10028-3 fine grain steel normalised P460NH 1.8935 N 0 100 1.3
37 plate and strip EN 10028-3 fine grain steel normalised P460NL1 1.8915 N 0 100 1.3
38 plate and strip EN 10028-3 fine grain steel normalised P460NL2 1.8918 N 0 100 1.3


     9

---------------------- Page: 11 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat
Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608
39 plate and strip EN 10028-4 low temperature properties 11MnNi5-3 1.6212 N,NT 0 80 9.1
40 plate and strip EN 10028-4 low temperature properties 13MnNi6-3 1.6217 N,NT 0 80 9.1
41 plate and strip EN 10028-4 low temperature properties 15NiMn6 1.6228 N,NT,QT 0 80 9.1
42 plate and strip EN 10028-4 low temperature properties 12Ni14 1.5637 N,NT,QT 0 80 9.2
43 plate and strip EN 10028-4 low temperature properties X12Ni5 1.5680 N,NT,QT 0 50 9.2
44 plate and strip EN 10028-4 low temperature properties X8Ni9+NT640 1.5662 N+NT 0 50 9.3
45 plate and strip EN 10028-4 low temperature properties X8Ni9+QT640 1.5662 QT 0 50 9.3
46 plate and strip EN 10028-4 low temperature properties X8Ni9+QT680 1.5662 N+NT, QT 0 15 9.3
47 plate and strip EN 10028-4 low temperature properties X8Ni9+QT680 1.5662 QT 15 50 9.3
48 plate and strip EN 10028-4 low temperature properties X7Ni9 1.5663 N+NT, QT 0 15 9.3
49 plate and strip EN 10028-4 low temperature properties X7Ni9 1.5663 QT 15 50 9.3
50 plate and strip EN 10028-5 fine grain steel, thermomechanically P355M 1.8821 M 0 63 1.2
f
rolled
51 plate and strip EN 10028-5 fine grain steel, thermomechanically P355ML1 1.8832 M 0 63 1.2
f
rolled
52 plate and strip EN 10028-5 fine grain steel, thermomechanically P355ML2 1.8833 M 0 63 1.2
f
rolled
53 plate and strip EN 10028-5 fine grain steel, thermomechanically P420M 1.8824 M 0 63 2.1
f
rolled
54 plate and strip EN 10028-5 fine grain steel, thermomechanically P420ML1 1.8835 M 0 63 2.1
f
rolled
55 plate and strip EN 10028-5 fine grain steel, thermomechanically P420ML2 1.8828 M 0 63 2.1
f
rolled

10

---------------------- Page: 12 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608
56 plate and strip EN 10028-5 fine grain steel, thermomechanically P460M 1.8826 M 0 63 2.1
f
rolled
57 plate and strip EN 10028-5 fine grain steel, thermomechanically P460ML1 1.8837 M 0 63 2.1
f
rolled
58 plate and strip EN 10028-5 fine grain steel, thermomechanically P460ML2 1.8831 M 0 63 2.1
f
rolled
59 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355Q 1.8866 QT 0 150 1.2
60 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355QH 1.8867 QT 0 150 1.2
61 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355QL1 1.8868 QT 0 150 1.2
62 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355QL2 1.8869 QT 0 150 1.2
63 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460Q 1.8870 QT 0 150 3.1
64 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460QH 1.8871 QT 0 150 3.1
65 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460QL1 1.8872 QT 0 150 3.1
66 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460QL2 1.8864 QT 0 150 3.1
67 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500Q 1.8873 QT 0 150 3.1
68 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500QH 1.8874 QT 0 150 3.1
69 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500QL1 1.8875 QT 0 150 3.1
70 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500QL2 1.8865 QT 0 150 3.1
71 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690Q 1.8879 QT 0 150 3.1
72 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690QH 1.8880 QT 0 150 3.1
73 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690QL1 1.8881 QT 0 150 3.1
74 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690QL2 1.8888 QT 0 150 3.1

     11

---------------------- Page: 13 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat
Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608

75 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiN18-7 1.4318 AT 0 75 8.1

76 plate and strip EN 10028-7 stainless steel, austenitic X2CrNi18-9 1.4307 AT 0 75 8.1

77 plate and strip EN 10028-7 stainless steel, austenitic X2CrNi19-11 1.4306 AT 0 75 8.1

78 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiN18-10 1.4311 AT 0 75 8.1

79 plate and strip EN 10028-7 stainless steel, austenitic X5CrNi18-10 1.4301 AT 0 75 8.1

80 plate and strip EN 10028-7 stainless steel, austenitic X5CrNiN19-9 1.4315 AT 0 75 8.1

81 plate and strip EN 10028-7 stainless steel, austenitic X6CrNi18-10 1.4948 AT 0 75 8.1

82 plate and strip EN 10028-7 stainless steel, austenitic X6CrNi23-13 1.4950 AT 0 75 8.2

83 plate and strip EN 10028-7 stainless steel, austenitic X6CrNi25-20 1.4951 AT 0 75 8.2

84 plate and strip EN 10028-7 stainless steel, austenitic X6CrNiTi18-10 1.4541 AT 0 75 8.1

85 plate and strip EN 10028-7 stainless steel, austenitic X6CrNiTiB18-10 1.4941 AT 0 75 8.1

86 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMo17-12-2 1.4404 AT 0 75 8.1

87 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMoN17-12-2 1.4406 AT 0 75 8.1

88 plate and strip EN 10028-7 stainless steel, austenitic X5CrNiMo17-12-2 1.4401 AT 0 75 8.1

89 plate and strip EN 10028-7 stainless steel, austenitic X6CrNiMoTi17-12-2 1.4571 AT 0 75 8.1

90 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMo17-12-3 1.4432 AT 0 75 8.1

91 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMo18-14-3 1.4435 AT 0 75 8.1

92 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMoN17-13-5 1.4439 AT 0 75 8.1

93 plate and strip EN 10028-7 stainless steel, austenitic X1NiCrMoCu25-20-5 1.4539 AT 0 75 8.2

94 plate and strip EN 10028-7 stainless steel, austenitic X5NiCrAlTi31-20 1.4958 AT 0 75 8.2

12

---------------------- Page: 14 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608

95 plate and strip EN 10028-7 stainless steel, austenitic X5NiCrAlTi31-20+RA 1.4958+RA AT+RA 0 75 8.2

96 plate and strip EN 10028-7 stainless steel, austenitic X8NiCrAlTi32-21 1.4959 AT 0 75 8.2

97 plate and strip EN 10028-7 stainless steel, austenitic X3CrNiMoBN17-13-3 1.4910 AT 0 75 8.2

98 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNi25-21 1.4335 AT 0 75 8.2

99 plate and strip EN 10028-7 stainless steel, austenitic, special X6CrNiNb18-10 1.4550 AT 0 75 8.1

100 plate and strip EN 10028-7 stainless steel, austenitic, special X8CrNiNb16-13 1.4961 AT 0 75 8.1

101 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNiMoN25-22-2 1.4466 AT 0 75 8.2

102 plate and strip EN 10028-7 stainless steel, austenitic, special X6CrNiMoNb17-12-2 1.4580 AT 0 75 8.1

103 plate and strip EN 10028-7 stainless steel, austenitic, special X2CrNiMoN17-13-3 1.4429 AT 0 75 8.1

104 plate and strip EN 10028-7 stainless steel, austenitic, special X3CrNiMoN17-13-3 1.4436 AT 0 75 8.1

105 plate and strip EN 10028-7 stainless steel, austenitic, special X2CrNiMoN18-12-4 1.4434 AT 0 75 8.1

106 plate and strip EN 10028-7 stainless steel, austenitic, special X2CrNiMo18-15-4 1.4438 AT 0 75 8.1

107 plate and strip EN 10028-7 stainless steel, austenitic, special X1NiCrMoCu31-27-4 1.4563 AT 0 75 8.2

108 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNiMoCuN25-25-5 1.4537 AT 0 75 8.2

109 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNiMoCuN20-18-7 1.4547 AT 0 75 8.2

110 plate and strip EN 10028-7 stainless steel, austenitic, special X1NiCrMoCuN25-20-7 1.4529 AT 0 75 8.2
c
111 plate and strip EN 10028-7 stainless steel, austenitic-ferritic X2CrNiN23-4 1.4362 AT 0 75 10.1
c
112 plate and strip EN 10028-7 stainless steel, austenitic-ferritic X2CrNiMoN22-5-3 1.4462 AT 0 75 10.1
c
113 plate and strip EN 10028-7 stain, steel, austenitic-ferritic, special X2CrNiMoCuN25-6-3 1.4507 AT 0 75 10.2
c
114 plate and strip EN 10028-7 stain, steel, austenitic-ferritic, special X2CrNiMoN25-7-4 1.4410 AT 0 75 10.2
c
115 plate and strip EN 10028-7 stain, steel, austenitic-ferritic, special X2CrNiMoCuWN25-7-4 1.4501 AT 0 75 10.2
     13

---------------------- Page: 15 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat
Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608
e
116 bar EN 10272 stainless steel, martensitic X4CrNiMo16-5-1 1.4418 QT760 0 160 7.2

117 bar EN 10272 stainless steel, austenitic X2CrNi18-9 1.4307 AT 0 250 8.1

118 bar EN 10272 stainless steel, austenitic X2CrNi19-11 1.4306 AT 0 250 8.1

119 bar EN 10272 stainless steel, austenitic X2CrNiN18-10 1.4311 AT 0 250 8.1

120 bar EN 10272 stainless steel, austenitic X5CrNi18-10 1.4301 AT 0 250 8.1

121 bar EN 10272 stainless steel, austenitic X6CrNiTi18-10 1.4541 AT 0 250 8.1

122 bar EN 10272 stainless steel, austenitic X2CrNiMo17-12-2 1.4404 AT 0 250 8.1

123 bar EN 10272 stainless steel, austenitic X2CrNiMoN17-11-2 1.4406 AT 0 250 8.1

124 bar EN 10272 stainless steel, austenitic X5CrNiMo17-12-2 1.4401 AT 0 250 8.1

125 bar EN 10272 stainless steel, austenitic X6CrNiMoTi17-12-2 1.4571 AT 0 250 8.1

126 bar EN 10272 stainless steel, austenitic X2CrNiMo17-12-3 1.4432 AT 0 250 8.1

127 bar EN 10272 stainless steel, austenitic X2CrNiMo18-14-3 1.4435 AT 0 250 8.1

128 bar EN 10272 stainless steel, austenitic X2CrNiMo17-13-5 1.4439 AT 0 250 8.1

129 bar EN 10272 stainless steel, austenitic X1NiCrMoCu25-20-5 1.4539 AT 0 250 8.2

130 bar EN 10272 stainless steel, austenitic X6CrNiNb18-10 1.4550 AT 0 250 8.1

131 bar EN 10272 stainless steel, austenitic X6CrNiMoNb17-12-2 1.4580 AT 0 250 8.1

132 bar EN 10272 stainless steel, austenitic X2CrNiMoN17-13-3 1.4429 AT 0 250 8.1

133 bar EN 10272 stainless steel, austenitic X3CrNiMo17-13-3 1.4436 AT 0 250 8.1

134 bar EN 10272 stainless steel, austenitic X1NiCrMoCu31-27-4 1.4563 AT 0 250 8.2

135 bar EN 10272 stainless steel, austenitic X1CrNiMoCuN20-18-7 1.4547 AT 0 250 8.2

14

---------------------- Page: 16 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608

136 bar EN 10272 stainless steel, austenitic X1NiCrMoCuN25-20-7 1.4529 AT 0 250 8.2
c
137 bar EN 10272 stainless steel, austenitic-ferritic X2CrNiMoN22-5-3 1.4462 AT 0 160 10.1
c
138 bar EN 10272 stainless steel, austenitic-ferritic X2CrNiN23-4 1.4362 AT 0 160 10.1
c
139 bar EN 10272 stainless steel, austenitic-ferritic X2CrNiMoCuN25-6-3 1.4507 AT 0 160 10.2
c
140 bar EN 10272 stainless steel, austenitic-ferritic X2CrNiMoN25-7-4 1.4410 AT 0 160 10.2
c
141 bar EN 10272 stainless steel, austenitic-ferritic X2CrNiMoCuWN25-7-4 1.4501 AT 0 160 10.2

142 bar EN 10273 elevated temperature properties P235GH 1.0345 N 0 150 1.1

143 bar EN 10273 elevated temperature properties P250GH 1.0460 N 0 150 1.1

144 bar EN 10273 elevated temperature properties P265GH 1.0425 N 0 150 1.1

145 bar EN 10273 elevated temperature properties P295GH 1.0481 N 0 150 1.2

146 bar EN 10273 elevated temperature properties P355GH 1.0473 N 0 150 1.2

147 bar EN 10273 elevated temperature properties P275NH 1.0487 N 0 150 1.1

148 bar EN 10273 elevated temperature properties P355NH 1.0565 N 0 150 1.2

149 bar EN 10273 elevated temperature properties P460NH 1.8935 N 0 150 1.3

150 bar EN 10273 elevated temperature properties P355QH 1.8867 QT 0 150 1.2

151 bar EN 10273 elevated temperature properties P460QH 1.8871 QT 0 150 3.1

152 bar EN 10273 elevated temperature properties P500QH 1.8874 QT 0 150 3.1


     15

---------------------- Page: 17 ----------------------

SIST EN 13480-2:2002/A1:2011
EN 13480-2:2002/A1:2010 (E)
Table D.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat
Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608

153 bar EN 10273 elevated temperature properties P690QH 1.8880 QT 0 150 3.1
e
154 bar EN 10273 elevated temperature properties 16Mo3 1.5415 N 0 150 1.2

155 Bar EN 10273 elevated temperature properties 13C
...