SIST EN 61754-2:1997

Fibre optic connector interfaces -- Part 2: Type BFOC/2,5 connector family

Defines the standard interface dimensions for type BFOC/2,5 family of connectors which is a single position plug connector characterized by a 2,5 mm nominal ferrule diameter.

Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 2: Bauart BFOC/2,5 Steckverbinderfamilie

Interfaces de connecteurs pour fibres optiques -- Partie 2: Famille de connecteurs de type BFOC/2,5

Définit les dimensions d'interfaces normalisées pour la famille des connecteurs de type BFOC/2,5 qui sont composés d'une fiche de connecteur monovoie, caractérisée par une ferrule d'un diamètre nominal de 2,5 mm.

Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family (IEC 1754-2:1996)

General Information

• Status: Published
• Publication Date: 30-Nov-1997
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-1997
• Due Date: 01-Dec-1997
• Completion Date: 01-Dec-1997
• Ref Project: EN 61754-2:1997 - Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family (IEC 1754-2:1996)Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 2: Bauart BFOC/2,5 SteckverbinderfamilieInterfaces de connecteurs pour fibres optiques -- Partie 2: Famille de connecteurs de type BFOC/2,5Fibre optic connector interfaces -- Part 2: Type BFOC/2,5 connector family33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61754-2:1997SIST EN 61754-2:1997en01-december-1997SIST EN 61754-2:1997SLOVENSKI
STANDARD



SIST EN 61754-2:1997



SIST EN 61754-2:1997



SIST EN 61754-2:1997



NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD1754-2Première éditionFirst edition1996-12Ó CEI 1996
Droits de reproduction réservés
¾ Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilizedin any form or by any means, electronic or mechanical,including photocopying and microfilm, without
permissionin writing
from the publisherBureau central de la Commission
Electrotechnique Internationale
3, rue de Varembé
Genève Suisse Commission Electrotechnique Internationale International Electrotechnical
CommissionCODE PRIXPRICE CODEPour prix, voir catalogue en vigueurFor price, see current
catalogueKInterfaces de connecteurs pour fibres optiques –Partie 2:Famille de connecteurs de type BFOC/2,5Fibre optic connector interfaces –Part 2:Type BFOC/2,5 connector familySIST EN 61754-2:1997



1754-2 © IEC:1996-- 3 –CONTENTSPageFOREWORD.5Clause1Scope.72Description.73Interfaces.7SIST EN 61754-2:1997



1754-2 © IEC:1996-- 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION_________FIBRE OPTIC CONNECTOR INTERFACES -Part 2: Type BFOC/2,5 connector familyFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical reports or guides and they are accepted by the National Committees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard
...