SIST-TP CLC IEC/TR 62541-2:2021
(Main)OPC unified architecture - Part 2: Security Model (IEC/TR 62541-2:2020)
OPC unified architecture - Part 2: Security Model (IEC/TR 62541-2:2020)
This part of IEC 62541 describes the OPC Unified Architecture (OPC UA) security model. It describes the security threats of the physical, hardware, and software environments in which OPC UA is expected to run. It describes how OPC UA relies upon other standards for security. It provides definition of common security terms that are used in this and other parts of the OPC UA specification. It gives an overview of the security features that are specified in other parts of the OPC UA specification. It references services, mappings, and Profiles that are specified normatively in other parts of the OPC UA Specification. It provides suggestions or best practice guidelines on implementing security. Any seeming ambiguity between this part and one of the other normative parts does not remove or reduce the requirement specified in the other normative part.
OPC Unified Architecture - Teil 2: Modell für die IT-Sicherheit (IEC/TR 62541-2:2020)
Architecture unifiée OPC - Partie 2: Modèle de sécurité (IEC/TR 62541-2:2020)
IEC TR 62541-2:2020 est disponible sous forme de IEC TR 62541-2:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
Poenotena arhitektura OPC - 2. del: Zaščitni model (IEC/TR 62541-2:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CLC IEC/TR 62541-2:2021
01-december-2021
Nadomešča:
SIST-TP CLC/TR 62541-2:2010
Poenotena arhitektura OPC - 2. del: Zaščitni model (IEC/TR 62541-2:2020)
OPC unified architecture - Part 2: Security Model (IEC/TR 62541-2:2020)
OPC Unified Architecture - Teil 2: Modell für die IT-Sicherheit (IEC/TR 62541-2:2020)
Architecture unifiée OPC - Partie 2: Modèle de sécurité (IEC/TR 62541-2:2020)
Ta slovenski standard je istoveten z: CLC IEC/TR 62541-2:2021
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST-TP CLC IEC/TR 62541-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
---------------------- Page: 2 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
TECHNICAL REPORT CLC IEC/TR 62541-2
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
July 2021
ICS 25.040.40; 35.100.01 Supersedes CLC/TR 62541-2:2010
English Version
OPC unified architecture - Part 2: Security Model
(IEC/TR 62541-2:2020)
Architecture unifiée OPC - Partie 2: Modèle de sécurité OPC Unified Architecture - Teil 2: Modell für die IT-
(IEC/TR 62541-2:2020) Sicherheit
(IEC/TR 62541-2:2020)
This Technical Report was approved by CENELEC on 2021-07-05.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC IEC/TR 62541-2:2021 E
---------------------- Page: 3 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
CLC IEC/TR 62541-2:2021 (E)
European foreword
This document (CLC IEC/TR 62541-2:2021) consists of the text of IEC/TR 62541-2:2020, prepared by
SC 65E "Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process
measurement, control and automation".
This document supersedes CLC/TR 62541-2:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Technical Report IEC/TR 62541-2:2020 was approved by CENELEC as a
European Technical Report without any modification.
2
---------------------- Page: 4 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
CLC IEC/TR 62541-2:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC/TR 62541-1 - OPC Unified Architecture - Part 1: CLC IEC/TR 62541-1 -
Overview and Concepts
IEC 62541-4 - OPC Unified Architecture - Part 4: EN IEC 62541-4 -
Services
IEC 62541-5 - OPC Unified Architecture - Part 5: EN IEC 62541-5 -
Information Model
IEC 62541-6 - OPC Unified Architecture - Part 6: EN IEC 62541-6 -
Mappings
IEC 62541-7 - OPC unified architecture - Part 7: Profiles EN IEC 62541-7 -
IEC 62541-12 - OPC unified architecture - Part 12: EN IEC 62541-12 -
Discovery and global services
IEC 62541-14 - OPC unified architecture - Part 14: EN IEC 62541-14 -
PubSub
IEC 62351 series Power systems management and EN IEC 62351 series
associated information exchange - Data
and communications security
3
---------------------- Page: 5 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
---------------------- Page: 6 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
IEC TR 62541-2
®
Edition 3.0 2020-11
TECHNICAL
REPORT
colour
inside
OPC unified architecture –
Part 2: Security Model
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.01 ISBN 978-2-8322-9077-4
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
– 2 – IEC TR 62541-2:2020 © IEC 2020
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 13
4 OPC UA security architecture . 13
4.1 OPC UA security environment . 13
4.2 Security objectives . 14
4.2.1 Overview . 14
4.2.2 Authentication. 15
4.2.3 Authorization . 15
4.2.4 Confidentiality . 15
4.2.5 Integrity . 15
4.2.6 Non-Repudiation . 15
4.2.7 Auditability . 15
4.2.8 Availability . 15
4.3 Security threats to OPC UA systems . 15
4.3.1 Overview . 15
4.3.2 Denial of Service . 16
4.3.3 Eavesdropping . 17
4.3.4 Message spoofing . 17
4.3.5 Message alteration . 17
4.3.6 Message replay . 17
4.3.7 Malformed Messages . 18
4.3.8 Server profiling . 18
4.3.9 Session hijacking . 18
4.3.10 Rogue Server . 18
4.3.11 Rogue Publisher . 18
4.3.12 Compromising user credentials . 19
4.3.13 Repudiation . 19
4.4 OPC UA relationship to site security . 19
4.5 OPC UA security architecture . 20
4.5.1 Overview . 20
4.5.2 Client / Server . 21
4.5.3 Publish-Subscribe . 22
4.6 SecurityPolicies . 23
4.7 Security Profiles . 24
4.8 Security Mode Settings . 24
4.9 User Authentication . 24
4.10 Application Authentication . 24
4.11 User Authorization . 25
4.12 Roles . 25
4.13 OPC UA security related Services . 25
4.14 Auditing . 26
4.14.1 General . 26
---------------------- Page: 8 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
IEC TR 62541-2:2020 © IEC 2020 – 3 –
4.14.2 Single Client and Server . 27
4.14.3 Aggregating Server . 28
4.14.4 Aggregation through a non-auditing Server . 28
4.14.5 Aggregating Server with service distribution . 29
5 Security reconciliation . 30
5.1 Reconciliation of threats with OPC UA security mechanisms . 30
5.1.1 Overview . 30
5.1.2 Denial of Service . 31
5.1.3 Eavesdropping . 32
5.1.4 Message spoofing . 32
5.1.5 Message alteration . 33
5.1.6 Message replay . 33
5.1.7 Malformed Messages . 33
5.1.8 Server profiling . 33
5.1.9 Session hijacking . 33
5.1.10 Rogue Server or Publisher . 34
5.1.11 Compromising user credentials . 34
5.1.12 Repudiation . 34
5.2 Reconciliation of objectives with OPC UA security mechanisms . 34
5.2.1 Overview . 34
5.2.2 Application Authentication . 34
5.2.3 User Authentication . 35
5.2.4 Authorization . 35
5.2.5 Confidentiality . 35
5.2.6 Integrity . 35
5.2.7 Auditability . 35
5.2.8 Availability . 36
6 Implementation and deployment considerations . 36
6.1 Overview. 36
6.2 Appropriate timeouts . 36
6.3 Strict Message processing . 36
6.4 Random number generation . 37
6.5 Special and reserved packets . 37
6.6 Rate limiting and flow control . 37
6.7 Administrative access . 37
6.8 Cryptographic Keys . 38
6.9 Alarm related guidance . 38
6.10 Program access . 38
6.11 Audit event management . 39
6.12 OAuth2, JWT and User roles . 39
6.13 HTTPs, SSL/TLS & Websockets . 39
6.14 Reverse Connect . 39
7 Unsecured Services . 40
7.1 Overview. 40
7.2 Multicast Discovery . 40
7.3 Global Discovery Server Security . 40
7.3.1 Overview . 40
7.3.2 Rogue GDS . 40
7.3.3 Threats against a GDS . 41
---------------------- Page: 9 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
– 4 – IEC TR 62541-2:2020 © IEC 2020
7.3.4 Certificate management threats . 41
8 Certificate management . 42
8.1.1 Overview . 42
8.1.2 Self-signed certificate management . 42
8.1.3 CA Signed Certificate management . 43
8.1.4 GDS Certificate Management . 44
Bibliography . 47
Figure 1 – OPC UA network example . 14
Figure 2 – OPC UA security architecture – Client / Server . 20
Figure 3 – OPC UA security architecture – Publisher-Subscriber . 21
Figure 4 – Role overview . 25
Figure 5 – Simple Servers . 27
Figure 6 – Aggregating Servers . 28
Figure 7 – Aggregation with a non-auditing Server . 29
Figure 8 – Aggregate Server with service distribution . 30
Figure 9 – Manual Certificate handling . 42
Figure 10 – CA Certificate handling . 43
Figure 11 – Certificate handling . 45
Table 1 – Security Reconciliation Threats Summary . 31
---------------------- Page: 10 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
IEC TR 62541-2:2020 © IEC 2020 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPC UNIFIED ARCHITECTURE –
Part 2: Security Model
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62541-2, which is a technical report, has been prepared by subcommittee 65E: Devices
and integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This third edition cancels and replaces the second edition of IEC TR 62541-2, published in
2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) protection-targets definition change;
b) threat type clarifications;
c) expanded best practices;
---------------------- Page: 11 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
– 6 – IEC TR 62541-2:2020 © IEC 2020
d) added Websockets;
e) added Pub/Sub.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
65E/679/DTR 65E/703/RVDR
Full information on the voting for the approval of this technical report can be found in the report
on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
Throughout this document and the referenced other Parts of the series, certain document
conventions are used:
Italics are used to denote a defined term or definition that appears in the “Terms and definition”
clause in one of the parts of the series.
Italics are also used to denote the name of a service input or output parameter or the name of
a structure or element of a structure that are usually defined in tables.
The italicized terms and names are also often written in camel-case (the practice of writing
compound words or phrases in which the elements are joined without spaces, with each
element's initial letter capitalized within the compound). For example, the defined term is
AddressSpace instead of Address Space. This makes it easier to understand that there is a
single definition for AddressSpace, not separate definitions for Address and Space.
A list of all parts of the IEC 62541 series, published under the general title OPC Unified
Architecture, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
---------------------- Page: 12 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
IEC TR 62541-2:2020 © IEC 2020 – 7 –
OPC UNIFIED ARCHITECTURE –
Part 2: Security Model
1 Scope
This part of IEC 62541 describes the OPC Unified Architecture (OPC UA) security model. It
describes the security threats of the physical, hardware, and software environments in which
OPC UA is expected to run. It describes how OPC UA relies upon other standards for security.
It provides definition of common security terms that are used in this and other parts of the OPC
UA specification. It gives an overview of the security features that are specified in other parts
of the OPC UA specification. It references services, mappings, and Profiles that are specified
normatively in other parts of the OPC UA Specification. It provides suggestions or best practice
guidelines on implementing security. Any seeming ambiguity between this part and one of the
other normative parts does not remove or reduce the requirement specified in the other
normative part.
It is important to understand that there are many different aspects of security that have to be
addressed when developing applications. However, since OPC UA specifies a communication
protocol, the focus is on securing the data exchanged between applications. This does not mean
that an application developer can ignore the other aspects of security like protecting persistent
data against tampering. It is important that the developers look into all aspects of security and
decide how they can be addressed in the application.
This part is directed to readers who will develop OPC UA Client or Server applications or
implement the OPC UA services layer. It is also for end Users that wish to understand the
various security features and functionality provided by OPC UA. It also offers some suggestions
that can be applied when deploying systems. These suggestions are generic in nature since
the details would depend on the actual implementation of the OPC UA Applications and the
choices made for the site security.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC TR 62541-1, OPC Unified Architecture – Part 1: Overview and Concepts
IEC 62541-4, OPC Unified Architecture – Part 4: Services
IEC 62541-5, OPC Unified Architecture – Part 5: Information Model
IEC 62541-6, OPC Unified Architecture – Part 6: Mappings
IEC 62541-7, OPC Unified Architecture – Part 7: Profiles
IEC 62541-12, OPC Unified Architecture – Part 12: Discovery and Global Services
IEC 62541-14, OPC Unified Architecture – Part 14: PubSub
IEC 62351 (all parts), Power systems management and associated information exchange
---------------------- Page: 13 ----------------------
SIST-TP CLC IEC/TR 62541-2:2021
– 8 – IEC TR 62541-2:2020 © IEC 2020
3 Terms, definitions, and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC TR 62541-1 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
Access Restriction
limit on the circumstances where an operation, such as a read, write or a call, can be performed
on a Node
Note 1 to entry: Operations can only be performed on a Node if the Client has the necessary Per
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.