oSIST prEN IEC 60794-1-110:2024
(Main)Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Kink, Method E10
Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Kink, Method E10
IEC 60794-1-110:2025 defines test procedures used to establishing uniform requirements for mechanical performance - kink. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. IEC 60794-1-2 gives general requirements, definitions and a complete reference guide to test methods of all types.
This first edition cancels and replaces Method E10 of the first edition of IEC 60794-1-21:2015, which will be withdrawn. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
addition of "4.7";
addition of "Annex A".
Lichtwellenleiterkabel - Teil 1-110: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Knickung, Verfahren E10
Câbles à fibres optiques - Partie 1-110: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Pliure (effet de paille), méthode e10
IEC 60794-1-110:2025 s’applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d'une part et de conducteurs électriques d'autre part. L’objet du présent document est de définir les procédures d’essai à utiliser en vue d’établir des exigences uniformes relatives aux performances mécaniques – pliure (effet de paille). L’IEC 60794-1-2 contient les exigences générales, les définitions et un guide de référence complet de tous les types de méthodes d’essai.
Cette première édition annule et remplace la Méthode E10 de la première édition de l'IEC 60794-1-21:2015, qui est destinée à être supprimée. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout du "4.7";
b) ajout de "Annexe A".
Optični kabli - 1-110. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Mehanske preskusne metode - Upogib, metoda E10
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Optični kabli - 1-110. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Upogib, metoda E10
Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Kink, Method E10
Câbles à fibres optiques - Partie 1-110: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Pliure
(effet de paille), méthode e10
Ta slovenski standard je istoveten z: prEN IEC 60794-1-110:2024
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86A/2436/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-110 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-03-29 2024-06-21
SUPERSEDES DOCUMENTS:
86A/2342/CD, 86A/2396A/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in this
CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Kink, Method E10
PROPOSED STABILITY DATE: 2028
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 60794-1-110/Ed1 ©IEC 2023 2 86A/2436/CDV
NOTE FROM TC/SC OFFICERS:
IEC CDV 60794-1-110/Ed1 ©IEC 2023 3 86A/2436/CDV
1 CONTENTS
3 FOREWORD . 4
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 6
7 4 Method E10: Kink . 6
8 4.1 Object . 6
9 4.2 Sample . 6
10 4.3 Apparatus . 6
11 4.4 Procedure . 7
12 4.5 Requirements . 7
13 4.6 Details to be specified . 7
14 4.7 Details to be reported . 7
15 (informative) Kink test using a tensile machine . 9
16 A.1 General . 9
17 A.2 Recommended test conditions . 9
19 Figure 1 – Kink test . 8
20 Figure A.1 – Example of kink test apparatus using a tensile machine . 10
22 Table A.1 – Recommended conditions for the kink test using a tensile machine. 9
IEC CDV 60794-1-110/Ed1 ©IEC 2023 4 86A/2436/CDV
26 INTERNATIONAL ELECTROTECHNICAL COMMISSION
27 ____________
29 OPTICAL FIBRE CABLES –
31 Part 1-110: Generic specification –
32 Basic optical cable test procedures –
33 Mechanical test methods – Kink, Method E10
35 FOREWORD
36 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
37 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
38 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
39 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
40 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
41 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
42 may participate in this preparatory work. International, governmental and non-governmental organizations
43 liaising with the IEC also participate in this preparation. IEC collaborates closely with the International
44 Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two
45 organizations.
46 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
47 consensus of opinion on the relevant subjects since each technical committee has representation from all
48 interested IEC National Committees.
49 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
50 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
51 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
52 misinterpretation by any end user.
53 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
54 transparently to the maximum extent possible in their national and regional publications. Any divergence between
55 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
56 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
57 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
58 services carried out by independent certification bodies.
59 6) All users should ensure that they have the latest edition of this publication.
60 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
61 members of its technical committees and IEC National Committees for any personal injury, property damage or
62 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
63 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
64 Publications.
65 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
66 indispensable for the correct application of this publication.
67 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
68 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
70 IEC 60794-1-110 has been prepared by subcommittee 86A: Fibres and cables, of IEC
71 technical committee 86: Fibre optics. It is an International Standard.
73 This first edition cancels and replaces Method E10 of the first edition of IEC 60794-1-
74 21:2015, which will be withdrawn. It constitutes a technical revision.
75 This edition includes
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.