SIST EN 13948:2007
(Main)Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration
This European Standard specifies a method to determine the resistance of roof waterproofing sheets to root penetration.
This European Standard relates exclusively to sheets. It is not possible to test a system comprising several different sheets.
This European Standard does not contain any evaluation of the sheet to be tested in respect of its environmental requirements.
Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen - Bestimmung des Widerstandes gegen Durchwurzelung
Diese Norm legt ein Verfahren zur Bestimmung des Widerstandes von Dachabdichtungsbahnen gegen Durchwurzelung fest.
Diese Norm bezieht sich ausschließlich auf die Bahnen. Die Untersuchung eines aus verschiedenen Lagen bestehenden Systems ist nicht möglich.
Die Norm umfasst keine Bewertungen bezüglich umweltbezogener Anforderungen an die zu prüfende Bahn
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture, bitumineuses, plastiques et élastomeres - Détermination de la résistance a la pénétration des racines
La présente Norme européenne décrit une méthode permettant de déterminer la résistance des feuilles d’étanchéité de toiture a la pénétration des racines.
La présente Norme européenne se rapporte exclusivement aux feuilles. Il n’est pas possible de soumettre a essai un systeme constitué de plusieurs feuilles différentes.
La présente Norme européenne ne contient aucune évaluation des exigences environnementales de la feuille a soumettre a essai.
Hidroizolacijski trakovi - Bitumenski, polimerni in elastomerni trakovi za tesnjenje streh - Določevanje odpornosti proti preboju korenin
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen - Bestimmung des Widerstandes gegen DurchwurzelungFeuilles souples d'étanchéité - Feuilles d'étanchéité de toiture, bitumineuses, plastiques et élastomeres - Détermination de la résistance a la pénétration des racinesFlexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 13948:2007SIST EN 13948:2007en,fr,de01-oktober-2007SIST EN 13948:2007SLOVENSKI
STANDARD
SIST EN 13948:2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13948June 2007ICS 91.100.50 English VersionFlexible sheets for waterproofing - Bitumen, plastic and rubbersheets for roof waterproofing - Determination of resistance toroot penetrationFeuilles souples d'étanchéité - Feuilles d'étanchéité detoiture, bitumineuses, plastiques et élastomères -Détermination de la résistance à la pénétration des racinesAbdichtungsbahnen - Bitumen-, Kunststoff- undElastomerbahnen für Dachabdichtungen - Bestimmung desWiderstandes gegen DurchwurzelungThis European Standard was approved by CEN on 23 May 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13948:2007: ESIST EN 13948:2007
EN 13948:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Principle.5 5 Apparatus.6 5.1 Greenhouse.6 5.2 Test and control containers.6 5.3 Moisture layer.7 5.4 Pressure distribution layer.7 5.5 Growing substrate.7 5.6 Fertiliser.8 5.6.1 Basic fertilisers (to be mixed with the growing substrate).8 5.6.2 Slow working coated fertiliser (to be used during the testing period).8 5.7 Tensiometer.8 5.8 Test plants.8 5.9 Water quality for irrigation.8 6 Sampling of test specimens.9 7 Procedure.9 7.1 Preparation of growing substrate.9 7.2 Preparation and installation of the test containers.10 7.3 Preparation and installation of the control containers.12 7.4 Care of the plants.12 8 Expression of results.13 8.1 General.13 8.2 During the test.13 8.3 At the end of the test.13 9 Precision of test method.14 10 Test report.14
SIST EN 13948:2007
EN 13948:2007 (E) 3 Foreword This document (EN 13948:2007) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn at the latest by December 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13948:2007
EN 13948:2007 (E) 4 Introduction This European Standard has been prepared by the Technical Committee CEN/TC 254 to determine the resistance to root penetration of flexible sheets for roof waterproofing. This European Standard is based on a method developed by the Association FLL (Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau ( http://www.f-l-l.de/english.html ), Bonn, Germany). SIST EN 13948:2007
EN 13948:2007 (E) 5
1 Scope This European Standard specifies a method to determine the resistance of roof waterproofing sheets to root penetration. This European Standard relates exclusively to sheets. It is not possible to test a system comprising several different sheets. This European Standard does not contain any evaluation of the sheet to be tested in respect of its environmental requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13037, Soil improvers and growing media — Determination of pH EN 13038, Soil improvers and growing media — Determination of electrical conductivity EN 13651, Soil improvers and growing media — Extraction of calcium chloride/DTPA (CAT) soluble nutrients 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 root penetration roots that have grown into and/or through the surface or joints of a sheet under test where the underground parts of the plants have actively created cavities and thus damaged the sheet 4 Principle The protection against root penetration of a sheet is tested in containers where the sheet is under exposure to roots under specified conditions. The test specimens of the sheet are installed in 6 test containers. The sheet shall have four wall corner joints, two base corner joints and one central T joint (see Figure 2). Additionally there shall be two control containers without sheets providing a comparison of the vitality of the plants in the test and control containers throughout the whole test period. The containers receive a layer of growing substrate and a dense covering of vegetation. This produces a high growing pressure from the roots, emphasised by a limited amount of fertiliser and a moderate watering. The test and control containers are exposed in a climate-controlled greenhouse, in which the parameters having an influence on the growing of the plants can be controlled. The growing period is 2 years as this period is the minimum time necessary to obtain reliable results. SIST EN 13948:2007
EN 13948:2007 (E) 6 After the testing period, the growing substrate is taken away and the behaviour of the test samples is assessed to observe if any root penetration has occurred. 5 Apparatus 5.1 Greenhouse The greenhouse shall be capable of regulating the temperature and ventilation. The minimum of the internal temperature shall be (18 ± 2) °C in the daytime and (16 ± 2) °C at night. The greenhouse shall be ventilated when the internal temperature reaches (22 ± 2) °C. A temperature exceeding 35 °C should be avoided. NOTE The natural light conditions in Central Europe associated with the indicated temperatures give favourable conditions for the growth of the test plants throughout the year. No shading of the plants in summer or artificial light in winter is necessary. In the case where the tests are performed under significant different light conditions (i.e. North or South of Europe), the light and the shading may be adapted in order to allow the plants to grow properly. Each 800 mm × 800 mm container requires an area of approximately 2 m², taking into account the requirements for clearance as specified in 7.2. 5.2 Test and control containers 6 test containers and 2 control containers are needed for testing one single sheet. The inside dimensions of the test containers shall be at least 800 mm × 800 mm × 250 mm. It may be necessary, for installation purposes, to have larger containers. The containers shall be fitted with transparent bases to allow the observation of the roots, which may have passed through the sheet during the testing period, without taking away the growing substrate. The base shall be blacked out (with a foil for example) to avoid the growing of algae in the moisture layer. For the water supply to the moisture layer, the containers shall have a filler pipe, pointing obliquely upwards, with a diameter of 35 mm, ending near the base tray (see Figure 1). SIST EN 13948:2007
EN 13948:2007 (E) 7
Dimemsions in millimeters 80025035 Figure 1 — Construction of container 5.3 Moisture layer A layer of coarse mineral granulates shall be placed on the transparent bases of the containers. It shall be permanently kept moist to encourage the roots to draw down onto the transparent base, in order to observe any early penetration of the roots This layer shall be composed of expanded slate/clay (grain fraction 8/16) of a quality suitable for use in hydroponics systems. When determined in accordance with EN 13038, the expanded slate/clay shall have an electrical conductivity of < 15,0 mS/m. 5.4 Pressure distributio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.