SIST EN 17388-2:2025
(Main)Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D
Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D
This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to gate with options, modules C1-C4 and module D EPD using specific data. This document includes requirements and rules to:
- define the indicators to be declared and the way in which they are collected and reported;
- describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- include the rules for calculating the life cycle inventory (LCI) and the life cycle impact assessment (LCIA) underlying an EPD, including the specification of the quality of the applied data.
Abdichtungsbahnen - Umweltproduktdeklaration - Produkt-Kategorie-Regeln für Bitumenbahnen mit Trägereinlage, Kunststoff- und Elastomerbahnen für Dachabdichtungen - Teil 2: Wiege bis Werkstor mit Optionen, Module C1-C4 und Modul D
Dieses Dokument stellt Produktkategorieregeln (PCR, en: Product Category Rules) zur Bewertung der umweltbezogenen Leistung von Bitumenbahnen mit Trägereinlage sowie Kunststoff- und Elastomerbahnen bereit, deren bestimmungsgemäße Verwendung die Dachabdichtung ist.
ANMERKUNG Bei den Referenz-Produktnormen handelt es sich um EN 13707 und EN 13956.
Dieses Dokument ist für die Entwicklung und Ausstellung einer vollständigen EPD "von der Wiege bis zum Werktor mit Optionen, Module C1 C4 und Modul D" unter Anwendung von spezifischen Daten vorgesehen. Dieses Dokument enthält Anforderungen und Regeln zur
- Festlegung der zu deklarierenden Indikatoren und der Art, in der sie erfasst und angegeben werden,
- Beschreibung, welche Phasen des Lebenszyklus eines Produkts in der EPD berücksichtigt werden und welche Prozesse in die Lebenszyklusphasen einzubeziehen sind und
- Einbeziehung der Regeln zur Berechnung der Sachbilanz und Wirkungsabschätzung, die einer EPD zugrunde liegen und die Spezifikation der Qualität der angewandten Daten einschließen.
Feuilles souples d’étanchéité - Déclarations environnementales sur les produits - Règles spécifiques des catégories de produits pour feuilles bitumineuses armées, feuilles plastiques et élastomères pour l'étanchéité de toiture - Partie 2 : Du berceau à la sortie de l'usine avec options, modules C1-C4 et module D
Le présent document fournit des règles de catégories de produits (RCP) pour l’évaluation de la performance environnementale des feuilles souples bitumineuses armées, plastiques et élastomères destinées à être utilisées pour l’étanchéité de toiture.
NOTE Les normes de produits de référence sont l’EN 13707 et l’EN 13956.
Le présent document est destiné à servir à l’élaboration et la publication d’une DEP du berceau à la sortie de l’usine avec options, modules C1-C4 et module D, en utilisant des données spécifiques. Ce document inclut des exigences et règles qui :
- définissent les indicateurs à déclarer et la manière dont ils sont recueillis et consignés ;
- décrivent les étapes du cycle de vie d’un produit prises en compte dans la DEP ainsi que les processus à inclure dans les étapes du cycle de vie ;
- intègrent les règles de calcul de l’inventaire du cycle de vie (ICV) et de l’évaluation de l’impact du cycle de vie (EICV) servant de base à la DEP, y compris la spécification de la qualité des données appliquées.
Hidroizolacijski trakovi - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov za ojačene bitumenske, polimerne in elastomerne trakove za tesnjenje streh - 2. del: Pristop "od zibelke do vrat" z možnostmi, moduli C1-C4 in modul D
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
kSIST FprEN 17388-2:2023
01-junij-2023
Hidroizolacijski trakovi - Okoljske deklaracije za proizvode - Pravila za kategorije
proizvodov za ojačene bitumenske, polimerne in elastomerne trakove za tesnjenje
streh - 2. del: Pristop "od zibelke do vrat" z možnostmi, moduli C1-C4 in modul D
Flexible sheets for waterproofing - Environmental product declarations - Product
category rules for reinforced bitumen, plastic and rubber flexible sheets for roof
waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D
Abdichtungsbahnen - Umweltproduktdeklaration - Produkt-Kategorie-Regeln für
Bitumenbahnen mit Trägereinlage, Kunststoff- und Elastomerbahnen für
Dachabdichtungen - Teil 2: Wiege bis Werkstor mit Optionen, Module C1-C4 und Modul
D
Feuilles souples d’étanchéité - Déclarations environnementales sur les produits - Règles
spécifiques des catégories de produits pour feuilles bitumineuses armées, feuilles
plastiques et élastomères pour l'étanchéité de toiture - Partie 2 : Du berceau à la sortie
de l'usine avec options, modules C1-C4 et module D
Ta slovenski standard je istoveten z: FprEN 17388-2
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
kSIST FprEN 17388-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
kSIST FprEN 17388-2:2023
kSIST FprEN 17388-2:2023
FINAL DRAFT
EUROPEAN STANDARD
FprEN 17388-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2023
ICS 91.100.50
English Version
Flexible sheets for waterproofing - Environmental product
declarations - Product category rules for reinforced
bitumen, plastic and rubber flexible sheets for roof
waterproofing - Part 2: Cradle to gate with options,
modules C1-C4 and module D
Feuilles souples d'étanchéité - Déclarations Abdichtungsbahnen - Umweltproduktdeklaration -
environnementales sur les produits - Règles Produkt-Kategorie-Regeln für Bitumenbahnen mit
spécifiques des catégories de produits pour feuilles Trägereinlage, Kunststoff- und Elastomerbahnen für
bitumineuses armées, feuilles plastiques et Dachabdichtungen - Teil 2: Wiege bis Werkstor mit
élastomères pour l'étanchéité de toiture - Partie 2 : Du Optionen, Module C1-C4 und Modul D
berceau à la sortie de l'usine avec options, modules C1-
C4 et module D
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee
CEN/TC 254.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 17388-2:2023 E
worldwide for CEN national Members.
kSIST FprEN 17388-2:2023
FprEN 17388-2:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviations . 7
5 General aspects . 7
5.1 Objective of the PCR . 7
5.2 Types of EPD with respect to life cycle stages covered . 8
5.3 Comparability of EPD for construction products . 8
5.4 Additional environmental information . 8
5.5 Ownership, responsibility and liability for the EPD . 8
5.6 Communication formats . 8
6 Product category rules for life cycle assessment (LCA) . 8
6.1 Product category . 8
6.2 Life cycle stages and information modules to be included . 8
6.2.1 General . 8
6.2.2 A1-A3, product stage, information modules . 8
6.2.3 A4-A5, construction process stage, information modules (optional) . 8
6.2.4 B1-B5, use stage, information modules related to the building fabric (optional) . 8
6.2.5 B6-B7, use stage, information modules related to the operation of the building
(optional) . 8
6.2.6 C1-C4, end-of-life stage, information modules . 9
6.2.7 D, benefits and loads beyond the system boundary, information module . 9
6.3 Calculation rules for the LCA . 9
6.3.1 Functional or declared unit . 9
6.3.2 Functional unit . 9
6.3.3 Declared unit . 9
6.3.4 Reference service life (RSL) . 9
6.3.5 System boundaries . 9
6.3.6 Criteria for the exclusion of inputs and outputs (cut-off criteria) . 11
6.3.7 Selection of data . 11
6.3.8 Data quality requirements . 12
6.3.9 Developing product level scenarios . 12
6.3.10 Units . 14
6.4 Inventory analysis . 14
6.4.1 Collecting data . 14
6.4.2 Calculation procedures . 14
6.4.3 Allocation of input flows and output emissions . 14
6.4.4 Information on biogenic carbon content. 14
6.5 Impact assessment . 14
7 Content of the EPD . 14
7.1 Declaration of general information . 14
7.2 Declaration of environmental parameters derived from LCA . 15
kSIST FprEN 17388-2:2023
FprEN 17388-2:2023 (E)
7.2.1 General . 15
7.2.2 Rules for declaring LCA information per module . 15
7.2.3 Indicators describing environmental impacts based on life cycle impact assessment
(LCIA) . 15
7.2.4 Indicators describing resource use and environmental information based on life
cycle inventory (LCI) . 15
7.2.5 Information on biogenic carbon content . 15
7.3 Scenarios and additional technical information . 15
7.3.1 General . 15
7.3.2 Construction process stage . 15
7.3.3 B1-B7 Use stage . 16
7.3.4 End-of-life . 16
7.4 Additional information on release of dangerous substances to indoor air, soil and
water during the use stage . 16
7.4.1 Indoor air . 16
7.4.2 Soil and water . 16
7.5 Aggregation of information modules . 16
8 Project report . 16
8.1 General . 16
8.2 LCA-related elements of the project report . 16
8.3 Documentation on additional information . 17
8.4 Data availability for verification . 17
9 Verification and validity of an EPD . 17
Annex A (informative) EPD scope and practice . 18
A.1 Introduction.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.