SIST EN 2591-514:2004

Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux

This standard specifies a method of verifying solderability of contacts with self-contained solder and flux, which are not accessible to a solder iron.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 514: Lötbarkeit von Kontakten mit eingearbeitetem Lot und Flussmittel

Diese Norm legt ein Verfahren zur Überprüfung der Lötbarkeit von Kontakten mit integriertem Lot und Flussmittel fest, die für einen Lötkolben nicht zugänglich sind.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 514: Soudabilité des contacts avec soudure et flux incorporés

Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2591-514:2002 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and fluxLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 514: Lötbarkeit von Kontakten mit eingearbeitetem Lot und FlussmittelSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 514: Soudabilité des contacts avec soudure et flux incorporésAerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-514:2002SIST EN 2591-514:2004en01-maj-2004SIST EN 2591-514:2004SLOVENSKI
STANDARD



SIST EN 2591-514:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-514June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 514: Solderability of contacts with self-contained solder and fluxSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 514: Soudabilité descontacts avec soudure et flux incorporésLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 514: Lötbarkeitvon Kontakten mit eingearbeitetem Löt- und FlußmittelThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stass
...