SIST EN 1151-2:2007/AC:2008

Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise

Popravek k standardu SIST EN 1151-2:2007
This part of EN 1151 specifies a test code for the vibro-acoustic characterisation of circulation pumps as defined in EN 1151-1, and is limited to circulation pumps with threaded connections of 1½ inch. The test code comprises the test rig, the measurement method and the test conditions. The characterisation principle is based on measuring the structure-borne and the fluid-borne power transmitted respectively by vibration and pressure fluctuations in the pipe connected to a circulation pump.

Pumpen - Kreiselpumpen - Umwälzpumpen mit elektrischer Leistungsaufnahme bis 200 W für Heizungsanlagen und Brauchwassererwärmungsanlagen für den Hausgebrauch - Teil 2: Geräuschprüfvorschrift (vibro-akustisch) zur Messung von Körperschall und Flüssigkeitsschall

Pompes - Pompes rotodynamiques - Circulateurs de puissance absorbée n'excédant pas 200 W, destinés aux installations de chauffage central et d'eau chaude sanitaire domestique - Partie 2: Code d'essai acoustique (vibro-acoustique) pour le mesurage des bruits solidiens et de liquide

Črpalke - Centrifugalne črpalke - Obtočne črpalke z naznačeno vhodno močjo do največ 200 W za grelne inštalacije in gospodinjske toplovodne inštalacije - 2. del: Oznaka preskusa hrupa (vibro-akustičnega) pri merjenju hrupa konstrukcije in hrupa tekočine

General Information

• Status: Withdrawn
• Publication Date: 05-Dec-2007
• Withdrawal Date: 11-Feb-2015
• ICS: 23.080 - Pumps
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 06-Feb-2015
• Due Date: 01-Mar-2015
• Completion Date: 12-Feb-2015
• Ref Project: EN 1151-2:2006/AC:2007 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise

Relations

• Corrects: SIST EN 1151-2:2007 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
• Effective Date: 01-Jan-2008
• Replaced By: SIST EN 16644:2015 - Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
• Effective Date: 01-Mar-2015
• Replaced By: SIST EN 16644:2015 - Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
• Effective Date: 08-Jun-2022
• Corrects: SIST EN 1151-2:2007 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noisePompes - Pompes rotodynamiques - Circulateurs de puissance absorbée n'excédant pas 200 W, destinés aux installations de chauffage central et d'eau chaude sanitaire domestique - Partie 2: Code d'essai acoustique (vibro-acoustique) pour le mesurage des bruits solidiens et de liquidePumpen - Kreiselpumpen - Umwälzpumpen mit elektrischer Leistungsaufnahme bis 200 W für Heizungsanlagen und Brauchwassererwärmungsanlagen für den Hausgebrauch - Teil 2: Geräuschprüfvorschrift (vibro-akustisch) zur Messung von Körperschall und FlüssigkeitsschallTa slovenski standard je istoveten z:EN 1151-2:2006/AC:2007SIST EN 1151-2:2007/AC:2008en,fr,de23.080ýUSDONHPumpsICS:SLOVENSKI
STANDARDSIST EN 1151-2:2007/AC:200801-januar-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1151-2:2006/ACOctober 2007Octobre 2007Oktober 2007ICS 23.080English versionVersion FrançaiseDeutsche FassungPumps - Rotodynamic pumps - Circulation pumps having a rated powerinput not exceeding 200 W for heating installations and domestic hot waterinstallations - Part 2: Noise test code (vibro-acoustics) for measuringstructure- and fluid-borne noisePompes - Pompes rotodynamiques -Circulateurs de puissance absorbéen'excédant pas 200 W, destinés auxinstallations de chauffage central et d'eauchaude sanitaire domestique - Part
...