SIST EN 14066:2003
(Main)Natural stone test methods - Determination of resistance to ageing by thermal shock
Natural stone test methods - Determination of resistance to ageing by thermal shock
This standard describes a test method for determining the thermal shock resistance value of natural stone elements.
Prüfverfahren für Naturstein - Bestimmung des Widerstandes gegen Alterung durch Wärmeschock
Méthodes d'essai pour pierres naturelles - Détermination de la résistance au vieillissement accéléré par chocs thermiques
La présente Norme européenne décrit une méthode pour déterminer les modifications possibles des pierres naturelles sous l'effet de changements brusques de températures (choc thermique).
Preskušanje naravnega kamna – Ugotavljanje odpornosti proti staranju s temperaturnim šokom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje naravnega kamna – Ugotavljanje odpornosti proti staranju s temperaturnim šokomPrüfverfahren für Naturstein - Bestimmung des Widerstandes gegen Alterung durch WärmeschockMéthodes d'essai pour pierres naturelles - Détermination de la résistance au vieillissement accéléré par chocs thermiquesNatural stone test methods - Determination of resistance to ageing by thermal shock91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 14066:2003SIST EN 14066:2003en01-november-2003SIST EN 14066:2003SLOVENSKI
STANDARD
SIST EN 14066:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14066April 2003ICS 73.020; 91.100.15English versionNatural stone test methods - Determination of resistance toageing by thermal shockMéthodes d'essai pour pierres naturelles - Déterminationde la résistance au vieillissement accéléré par chocsthermiquesPrüfverfahren für Naturstein - Bestimmung desWiderstandes gegen Alterung durch WärmeschockThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14066:2003 ESIST EN 14066:2003
EN 14066:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Principle.54Symbols and abbreviations.55Apparatus.56Preparation of the specimens.56.1Sampling.56.2Dimensions of the test specimens.66.3Putting reference marks on the specimens.66.4Drying the specimens.67Test procedure.67.1Control measurements before cycling.67.2Description of the cycles.67.3Control measurements after cycling.78Expression of results.79Test report.7SIST EN 14066:2003
EN 14066:2003 (E)3ForewordThis document EN 14066:2003 has been prepared by Technical Committee CEN /TC 246, "Natural stones", thesecretariat of which is held by UNI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.This draft standard is one of the series of draft standards for tests on natural stone.Test methods for natural stone consist of the following parts:EN 1925, Natural stone test methods – Determination of water absorption coefficient by capillarityEN 1926, Natural stone test methods – Determination of compressive strengthEN 1936, Natural stone test methods – Determination of real density and apparent density, and of total and openporosityEN 12370, Natural stone test methods – Determination of resistance to salt crystallisationEN 12372, Natural stone test methods – Determination of flexural strength under concentrated loadEN 12407, Natural stone test methods – Petrographic examinationEN 13161, Natural stone test methods – Determination of flexural strength under constant momentEN 13364, Natural stone test methods – Determination of the breaking load at dowel holeEN 13755, Natural stone test methods – Determination of water absorption at atmospheric pressureEN 13373, Natural stone test methods – Determination of geometric characteristics on unitsEN 13919, Natural stone test methods – Determination of resistance to ageing by SO2 action in the presence ofhumidityEN 14066, Natural stone test methods – Determination of resistance to ageing by thermal shockprEN 14146, Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring thefundamental resonance frequency)prEN 14147, Natural stone test methods – Determination of resistance to ageing by salt mistprEN 14157, Natural stone test methods – Determination of the abrasion resistanceprEN 14158, Natural stone test methods – Determination of rupture energyprEN 14205, Natural stone test methods – Determination of Knoop hardnessEN 14231, Natural stone test methods – Determination of the slip resistance by means of the pendulum testerprEN 14579 , Natural stone test methods – Determination of sound speed propagationSIST EN 14066:2003
EN 14066:2003 (E)4prEN 14580 , Natural stone test methods – Determination of static elastic modulus prEN 14581 , Natural stone testmethods – Determination of thermal expansion coefficientNo existing European Standard is superseded.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.