SIST EN ISO 3233-3:2015

Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)

This part of ISO 3233 a simple practical method for calculating the non-volatile matter by volume, NVV,
of a coating material from the non-volatile-matter content, NV, the density of the coating material, and
the density of the solvents. Using the non-volatile matter by volume results and the density obtained
in accordance with this part of ISO 3233, it is possible to calculate the theoretical spreading rate of a
coating material.
This part of ISO 3233 is not applicable to coating materials which exceed the critical pigment volume
concentration (CPVC).

Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile - Teil 3: Bestimmung durch Berechnung des nach ISO 3251 bestimmten Gehaltes an nichtflüchtigen Anteilen, der Dichte des Beschichtungsstoffes und der Dichte des Lösemittels im Beschichtungsstoff (ISO 3233-3:2015)

Diese Internationale Norm legt ein einfaches praxisnahes Verfahren zum Berechnen des Volumens nichtflüchtiger Anteile, VnfA, eines Beschichtungsstoffes aus dem Gehalt an nichtflüchtigen Anteilen, nfA, der Dichte des Beschichtungsstoffes und der Dichte der Lösemittel fest. Mit dem Ergebnis der Bestimmung des Volumens nichtflüchtiger Anteile und der nach dieser Internationalen Norm bestimmten Dichte ist es möglich, die theoretische Ergiebigkeit eines Beschichtungsstoffes zu berechnen.
Diese Internationale Norm ist nicht anwendbar für Beschichtungsstoffe, die die kritische Pigmentvolumen-konzentration (KPVK) überschreiten.

Peintures et vernis - Détermination du pourcentage en volume de matière non volatile - Partie 3: Détermination par calcul à partir de la teneur en matière non volatile déterminée conformément à l'ISO 3251, de la masse volumique du produit de peinture et de la masse volumique du solvant du produit de peinture (ISO 3233-3:2015)

ISO 3233-3:2015 spécifie une méthode pratique et simple de calcul du pourcentage en volume de matières non volatiles, NVV, dans un produit de peinture à partir de la teneur en matières non volatiles, NV, de la masse volumique du produit de peinture et de la masse volumique des solvants. Les valeurs de pourcentage en volume de matières non volatiles et de masse volumique obtenues par la présente partie de l'ISO 3233 permettent de calculer le rendement d'application théorique du produit de peinture.
ISO 3233-3:2015 n'est pas applicable aux produits de peinture dépassant la concentration pigmentaire volumique critique (CPVC).

Barve in laki - Določevanje prostorninskega deleža nehlapnih snovi - 3. del: Določevanje z računanjem iz deleža nehlapnih snovi, določenih v skladu z ISO 3251, gostote premazov ter gostote topila v premazih (ISO 3233-3:2015)

Ta del standarda ISO 3233 predstavlja preprosto praktično metodo za izračun prostorninskega deleža nehlapnih snovi, NVV, premazov iz deleža nehlapnih snovi, NV, gostote premaza in gostote topila. Z gostoto in rezultati prostorninskega deleža nehlapnih snovi, ki so pridobljeni v skladu s tem delom standarda ISO 3233, je mogoče izračunati teoretično hitrost nanašanja premaza.
Ta del standarda ISO 3233 se ne uporablja za premaze, v katerih je presežena kritična koncentracija prostornine pigmenta (CPVC).

General Information

• Status: Published
• Public Enquiry End Date: 28-Feb-2014
• Publication Date: 10-Aug-2015
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Jul-2015
• Due Date: 14-Sep-2015
• Completion Date: 11-Aug-2015
• Ref Project: EN ISO 3233-3:2015 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)

Relations

• Replaces: SIST EN ISO 23811:2009 - Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
• Effective Date: 01-Sep-2015
• Replaces: SIST EN ISO 23811:2009 - Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3233-3:2015
01-september-2015
1DGRPHãþD
SIST EN ISO 23811:2009
%DUYHLQODNL'RORþHYDQMHSURVWRUQLQVNHJDGHOHåDQHKODSQLKVQRYLGHO
'RORþHYDQMH]UDþXQDQMHPL]GHOHåDQHKODSQLKVQRYLGRORþHQLKYVNODGX],62
JRVWRWHSUHPD]RYWHUJRVWRWHWRSLODYSUHPD]LK,62
Paints and varnishes - Determination of the percentage volume of non-volatile matter -
Part 3: Determination by calculation from the non-volatile-matter content determined in
accordance with ISO 3251, the density of the coating material and the density of the
solvent in the coating material (ISO 3233-3:2015)
Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile - Teil 3:
Bestimmung durch Berechnung des nach ISO 3251 bestimmten Gehaltes an
nichtflüchtigen Anteilen, der Dichte des Beschichtungsstoffes und der Dichte des
Lösemittels im Beschichtungsstoff (ISO 3233-3:2015)
Peintures et vernis - Détermination du pourcentage en volume de matière non volatile -
Partie 3: Détermination par calcul à partir de la teneur en matière non volatile déterminée
conformément à l'ISO 3251, de la masse volumique du produit de peinture et de la
masse volumique du solvant du produit de peinture (ISO 3233-3:2015)
Ta slovenski standard je istoveten z: EN ISO 3233-3:2015
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 3233-3:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3233-3:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 3233-3:2015

EUROPEAN STANDARD
EN ISO 3233-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 87.040 Supersedes EN ISO 23811:2009
English Version
Paints and varnishes - Determination of the percentage volume
of non-volatile matter - Part 3: Determination by calculation from
the non-volatile-matter content determined in accordance with
ISO 3251, the density of the coating material and the density of
the solvent in the coating material (ISO 3233-3:2015)
Peintures et vernis - Détermination du pourcentage en Beschichtungsstoffe - Bestimmung des Volumens
volume de matière non volatile - Partie 3: Détermination par nichtflüchtiger Anteile - Teil 3: Bestimmung durch
calcul à partir de la teneur en matière non volatile Berechnung des nach ISO 3251 bestimmten Gehaltes an
déterminée conformément à l'ISO 3251, de la masse nichtflüchtigen Anteilen, der Dichte des
volumique du produit de peinture et de la masse volumique Beschichtungsstoffes und der Dichte des Lösemittels im
du solvant du produit de peinture (ISO 3233-3:2015) Beschichtungsstoff (ISO 3233-3:2015)
This European Standard was approved by CEN on 24 January 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3233-3:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3233-3:2015
EN ISO 3233:2015 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3233-3:2015
EN ISO 3233:2015 (E)
Foreword
This document (EN ISO 3233-3:2015) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn
at the latest by November 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 23811:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3233:2015 has been approved by CEN as EN ISO 3233:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 3233-3:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 3233-3:2015
INTERNATIONAL ISO
STANDARD 3233-3
First edition
2015-05-15
Paints and varnishes — Determination
of the percentage volume of non-
volatile matter —
Part 3:
Determination by calculation from
the non-volatile-matter content
determined in accordance with ISO
3251, the density of the coating
material and the density of the solvent
in the coating material
Peintures et vernis — Détermination du pourcentage en volume de
matière non volatile —
Partie 3: Détermination par calcul à partir de la teneur en matière
non volatile déterminée conformément à l’ISO 3251, de la masse
volumique du produit de peinture et de la masse volumique du solvant
du produit de peinture
Reference number
ISO 3233-3:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 3233-3:2015
ISO 3233-3:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3233-3:2015
ISO 3233-3:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Procedure. 2
5.1 Determination of the theoretical dry film density . 2
5.2 Determination of the density . 3
5.3 Determination of film thickness . 3
6 Calculation . 3
6.1 Calculation of the theoretical dry film density . 3
6.2 Calculation of the non-volatile matter by volume using the theoretical dry film density . 4
6.3 Determination of the theoretical spreading rate . 4
7 Precision . 5
7.1 Repeatability limit . 5
7.2 Reproducibility limit . 5
8 Test report . 5
Annex A (informative) Derivation of the theoretical dry film thickness . 6
Annex B (informative) Derivation of the theoretical spreading rate . 8
Annex C (informative) Example for the calculation of the theoretical spreading rate .11
Annex D (informative) Overview on the existing methods for determination of non-volatile-
matter content and volume of non-volatile matter .12
Bibliography .14
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3233-3:2015
ISO 3233-3:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and varnishes.
This first edition of ISO 3233-3 cancels and replaces ISO 23811:2009, which has been technically revised
and, in addition to the change in number, contains the following changes:
— symbols have been harmonized with those used in ISO 3233-1 and ISO 3233-2;
— determination of dry film thickness has been added;
— statement on the density of the solvents of waterborne systems has been added;
— informative annex (Annex D) for an overview on the existing methods for determination of non-
volatile matter content and volume of non-volatile matter has been added;
— text has been editorially revised and Normative References has been updated.
ISO 3233 consists of the following parts, under the general title Paints and varnishes — Determination of
percentage volume of non-volatile matter:
— Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film
density by the Archimedes principle
— Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and
determination of dry film density on coated test panels by the Archimedes principle
— Part 3: Determination by calculation from the non-volatile-matter content determined in accordance
with ISO 3251, the density of the coating material and the density of the solvent in the coating material
iv © ISO 2015 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 3233-3:2015
ISO 3233-3:2015(E)

Introduction
This method is used to determine the volume of the dry coating obtainable using a coating material by
calculation of the percentage volume of non-volatile matter. The value obtained by this method might
not be the same as that measured or calculated by adding together the masses and volumes of the raw
materials in a formulation. The volume occupied by a combination of resin and solvent might be the
same as, greater than, or less than the combined volume of the separate components, since contraction
or expansion of resin and the solvent can occur. A second factor affecting the volume of a dry coating is
the degree to which the spaces between pigment particles are filled with binder. A third factor is the use
of volatile components in reactive systems that, by their reaction, change into non-volatile film-building
materials, i.e. amines and reactive solvents in high-build two-component coating materials.
Above and close to the critical pigment volume concentration, the volume of a dry paint film is greater
than the theoretical volume, due to an increase in unfilled voids between pigment particles. The porosity
of the film means that this method is unsuitable.
Other methods for determination of the percentage volume of non-volatile matter are described in
ISO 3233-1 and ISO 3233-2. The method described in this part of ISO 3233 is a quick method which
needs only the results of the non-volatile matter and the density of the coating material and the density
of the solvents for the calculation. The precision of the method depends mainly on the determination
of the non-volatile matter content and the unknown densities. But the precision of the combination
of measurements and calculation is better than the precision of pure calculation methods with no
measurements. The simple practical method is often used in the automotive industry, especially for
commercial vehicles.
The method described in this part of ISO 3233 differs from the methods described in ASTM D 2697 and
ASTM D 5201-05, 5.5 and gives different results.
© ISO 2015 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 3233-3:2015

---------------------- Page: 12 ----------------------

SIST EN ISO 3233-3:2015
INTERNATIONAL STANDARD ISO 3233-3:2015(E)
Paints and varnishes — Determination of the percentage
volume of non-volatile matter —
Part 3:
Determination by calculation from the non-volatile-
matter content determined in accordance with ISO 3251,
the density of the coating material and the density of the
solvent in the coating material
1 Scope
This part of ISO 3233 a simple practical method for calculating the non-volatile matter by volume, NV ,
V
of a coating material from the non-volatile-matter content, NV, the density of the coating material, and
the density of the solvents. Using the non-volatile matter by volume results and the density obtained
in accordance with this part of ISO 3233, it is possible to calculate the theoretical spreading rate of a
coating material.
This part of ISO 3233 is not applicable to coating materials which exceed the critical pigment volume
concentration (CPVC).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 2808, Paints and varnishes — Determination of film thickness
ISO 2811-1, Paints and varnishes — Determination of density — Part 1: Pyknometer method
ISO 2811-2, Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method
ISO 2811-3, Paints and varnishes — Determination of density — Part 3: Oscillation method
ISO 2811-4, Pa
...