SIST EN 3745-504:2004
(Main)Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test
This standard specifies a method for determining the ability of an optical fibre or fibre optic cable to withstand microbending.
It shall be used together with EN 3745-100.
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 504: Mikrobiegungsstest
Diese Norm legt ein Verfahren zur Bestimmung der Widerstandsfähigkeit von Lichtwellenleitern oder Lichtwellen-leiterkabeln gegen Mikrobiegung fest.
Sie ist in Verbindung mit EN 3745-100 anzuwenden.
Série aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 504: Essai de microcourbure
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending testLuft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 504: MikrobiegungsstestSérie aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 504: Essai de microcourbureAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3745-504:2002SIST EN 3745-504:2004en01-maj-2004SIST EN 3745-504:2004SLOVENSKI
STANDARD
SIST EN 3745-504:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-504June 2002ICS 49.060English versionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 504: Micro bending testSérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 504: Essai demicrocourbureLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 504: Mikrobiegung testThis European Standard was approved by CEN on 1 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-504:2002 ESIST EN 3745-504:2004
EN 3745-504:2002 (E)2ForewordThis document (EN 3745-504:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards shall bewithdrawn at the latest by December 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 3745-504:2004
EN 3745-504:2002 (E)31ScopeThis standard specifies a method for determining the ability of an optical fibre or fibre optic cable to withstandmicrobending.It shall be used together with EN 3745-100.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropria
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.