SIST EN 62343-3-1:2010
Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers (IEC 62343-3-1:2010)
Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers (IEC 62343-3-1:2010)
This part of IEC 62343 provides a performance specification template for the dynamic channe equaliser (DCE). The object of this performance specification template is to provide a frame for the preparation of detail specifications on the performances of dynamic channel equalisers. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this standard should not be removed from the detail product specifications or performance specifications. The technical information regarding dynamic channel equalisers, and their applications in DWDM systems are described in future IEC/TR 62343-6-1.
Dynamische Module - Teil 3-1: Vorlagen für Leistungsspezifikationen - Dynamische Kanal-Equalizer (IEC 62343-3-1:2010)
Modules dynamiques - Partie 3-1: Modèles de spécification de performance - Egaliseurs de canaux de transmission dynamiques (CEI 62343-3-1:2010)
La CEI 62343-3-1:2010 donne un modèle de spécification de performance pour les égaliseurs de canaux de transmission dynamiques (DCE, dynamic channel equaliser). Ce modèle de spécification de performance est destiné à fournir un cadre pour l'établissement des spécifications particulières concernant les performances des égaliseurs de canaux de transmission dynamiques. Des paramètres de spécification supplémentaires peuvent être inclus pour les spécifications détaillées de produit ou de performances. Toutefois, il convient que les paramètres de spécification stipulés dans la présente norme ne soient pas retirés des spécifications particulières de produit ou de performance.
Dinamični moduli - 3-1. del: Predloge za tehnične specifikacije - Dinamični kanalski stabilizatorji (IEC 62343-3-1:2010)
Ta del IEC 62343 zagotavlja predloge za tehnične specifikacije za dinamične kanalske stabilizatorje (DCE). Namen teh predlogov za tehnične specifikacije je zagotoviti okvir za pripravo podrobnih specifikacij izvedbe dinamičnih kanalskih stabilizatorjev. Za podrobne specifikacije proizvoda ali izvedbene specifikacije so lahko vključeni dodatni specifikacijski parametri. Vendar pa se specifikacijski parametri, določeni v tem standardu, ne smejo izločiti iz podrobnih specifikacij proizvoda ali izvedbenih specifikacij. Tehnične informacije v zvezi z dinamičnimi kanalskimi stabilizatorji in njihova uporaba v sistemih DWDM bodo opisane v prihodnjem IEC/TR 62343-6-1.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dynamische Module - Teil 3-1: Vorlagen für Leistungsspezifikationen - Dynamische Kanal-Equalizer (IEC 62343-3-1:2010)Modules dynamiques - Partie 3-1: Modèles de spécification de performance - Egaliseurs de canaux de transmission dynamiques (CEI 62343-3-1:2010)Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers (IEC 62343-3-1:2010)33.180.30Optic amplifiersICS:Ta slovenski standard je istoveten z:EN 62343-3-1:2010SIST EN 62343-3-1:2010en,fr01-september-2010SIST EN 62343-3-1:2010SLOVENSKI
STANDARD
SIST EN 62343-3-1:2010
EUROPEAN STANDARD EN 62343-3-1 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62343-3-1:2010 E
ICS 33.180.20
English version
Dynamic modules -
Part 3-1: Performance specification templates -
Dynamic channel equalizers (IEC 62343-3-1:2010)
Modules dynamiques -
Partie 3-1: Modèles de spécification
de performance -
Egaliseurs de canaux de transmission dynamiques (CEI 62343-3-1:2010)
Dynamische Module -
Teil 3-1: Vorlagen
für Leistungsspezifikationen -
Dynamische Kanal-Equalizer (IEC 62343-3-1:2010)
This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 62343-3-1:2010
EN 62343-3-1:2010 - 2 - Foreword The text of document 86C/901/CDV, future edition 1 of IEC 62343-3-1, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62343-3-1 on 2010-06-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-03-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2013-06-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62343-3-1:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 series NOTE
Harmonized in EN 61300 series (not modified). IEC 61753-1 NOTE
Harmonized as EN 61753-1. __________ SIST EN 62343-3-1:2010
- 3 - EN 62343-3-1:2010 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 -
IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 -
IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 -
IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3-32 -
IEC 61753-021-2 - Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 -
ITU-T Recommendation G.694.1 - Spectral grids for WDM applications:
DWDM frequency grid - -
SIST EN 62343-3-1:2010
SIST EN 62343-3-1:2010
IEC 62343-3-1Edition 1.0 2010-04INTERNATIONAL STANDARD NORME INTERNATIONALEDynamic modules –
Part 3-1: Performance specification templates – Dynamic channel equalizers
Modules dynamiques –
Partie 3-1: Modèles de spécification de performance – Egaliseurs de canaux
de transmission dynamiques
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE LICS 33.180.20 PRICE CODECODE PRIXISBN 978-2-88910-678-3
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ® SIST EN 62343-3-1:2010
– 2 – 62343-3-1 © IEC:2010 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Test report.7 5 Reference components.8 6 Performance requirements.8 6.1 Dimensions.8 6.2 Sample size.8 6.3 Test details and requirements.8 Bibliography.10
Table 1 – Tests and requirements.8
SIST EN 62343-3-1:2010
62343-3-1 © IEC:2010 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DYNAMIC MODULES –
Part 3-1: Performance specification templates –
Dynamic channel equalizers
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.