EN 62343-3-1:2010

Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers

IEC 62343-3-1:2010 provides a performance specification template for the dynamic channel equalizer (DCE). The object of this performance specification template is to provide a frame for the preparation of detail specifications on the performances of dynamic channel equalizers. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this standard should not be removed from the detail product specifications or performance specifications.

Dynamische Module - Teil 3-1: Vorlagen für Leistungsspezifikationen - Dynamische Kanal-Equalizer

Modules dynamiques - Partie 3-1: Modèles de spécification de performance - Egaliseurs de canaux de transmission dynamiques

La CEI 62343-3-1:2010 donne un modèle de spécification de performance pour les égaliseurs de canaux de transmission dynamiques (DCE, dynamic channel equaliser). Ce modèle de spécification de performance est destiné à fournir un cadre pour l'établissement des spécifications particulières concernant les performances des égaliseurs de canaux de transmission dynamiques. Des paramètres de spécification supplémentaires peuvent être inclus pour les spécifications détaillées de produit ou de performances. Toutefois, il convient que les paramètres de spécification stipulés dans la présente norme ne soient pas retirés des spécifications particulières de produit ou de performance.

Dinamični moduli - 3-1. del: Predloge za tehnične specifikacije - Dinamični kanalski stabilizatorji (IEC 62343-3-1:2010)

Ta del IEC 62343 zagotavlja predloge za tehnične specifikacije za dinamične kanalske stabilizatorje (DCE). Namen teh predlogov za tehnične specifikacije je zagotoviti okvir za pripravo podrobnih specifikacij izvedbe dinamičnih kanalskih stabilizatorjev. Za podrobne specifikacije proizvoda ali izvedbene specifikacije so lahko vključeni dodatni specifikacijski parametri. Vendar pa se specifikacijski parametri, določeni v tem standardu, ne smejo izločiti iz podrobnih specifikacij proizvoda ali izvedbenih specifikacij. Tehnične informacije v zvezi z dinamičnimi kanalskimi stabilizatorji in njihova uporaba v sistemih DWDM bodo opisane v prihodnjem IEC/TR 62343-6-1.

General Information

• Status: Withdrawn
• Publication Date: 03-Jun-2010
• Withdrawal Date: 31-May-2013
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-May-2019
• Completion Date: 26-May-2019
• Ref Project: SIST EN 62343-3-1:2010 - Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers (IEC 62343-3-1:2010)

Relations

• Replaced By: EN 62343-3-1:2016 - Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
• Effective Date: 02-Aug-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dynamische Module - Teil 3-1: Vorlagen für Leistungsspezifikationen - Dynamische Kanal-Equalizer (IEC 62343-3-1:2010)Modules dynamiques - Partie 3-1: Modèles de spécification de performance - Egaliseurs de canaux de transmission dynamiques (CEI 62343-3-1:2010)Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers (IEC 62343-3-1:2010)33.180.30Optic amplifiersICS:Ta slovenski standard je istoveten z:EN 62343-3-1:2010SIST EN 62343-3-1:2010en,fr01-september-2010SIST EN 62343-3-1:2010SLOVENSKI
STANDARD



SIST EN 62343-3-1:2010



EUROPEAN STANDARD EN 62343-3-1 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62343-3-1:2010 E
ICS 33.180.20
English version
Dynamic modules -
Part 3-1: Performance specification templates -
Dynamic channel equalizers (IEC 62343-3-1:2010)
Modules dynamiques -
Partie 3-1: Modèles de spécification
de performance -
Egaliseurs de canaux de transmission dynamiques (CEI 62343-3-1:2010)
Dynamische Module -
Teil 3-1: Vorlagen
für Leistungsspezifikationen -
Dynamische Kanal-Equalizer (IEC 62343-3-1:2010)
This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 62343-3-1:2010



EN 62343-3-1:2010 - 2 - Foreword The text of document 86C/901/CDV, future edition 1 of IEC 62343-3-1, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62343-3-1 on 2010-06-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-03-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2013-06-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62343-3-1:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 series NOTE
Harmonized in EN 61300 series (not modified). IEC 61753-1 NOTE
Harmonized as EN 61753-1. __________ SIST EN 62343-3-1:2010



- 3 - EN 62343-3-1:2010 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 -
IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 -
IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part
...