This part of IEC 61020 specifies the terminology, symbols, test methods and other necessary information to provide consistency in detail specifications for electromechanical switches. This document relates to electromechanical switches intended for use in electrical and electronic appliances. Switches covered by this document: a) are devices which open, close, or change the connection of a circuit by the mechanical motion of conducting parts (contacts); b) have a maximum rated voltage of 480 V; c) have a maximum rated current of 63 A. This document does not include keyboards and keypads which are intended for use in information-handling systems. Electromechanical key switches can be included under the scope of this document. Switch families will be described in any detail specifications that reference this document. This document is a performance standard intended to describe evaluation methods to better clarify the capabilities of a switch. NOTE 1 Safety requirements for switches for household and similar fixed electrical installations are given in IEC 60669 (all parts). NOTE 2 Safety requirements for appliance switches are given in IEC 61058 (all parts).

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62343 provides a performance specification template for wavelength selective
switches. The object is to provide a framework for the preparation of detail specifications on the
performance of wavelength selective switches.
Additional specification parameters are often included for detailed product specifications or
performance specifications if necessary. However, specification parameters specified in this
document are not removed from the detail product specifications or performance specifications.
The technical information regarding wavelength selective switches and their applications in
DWDM systems with single-mode fibres are described in IEC TR 62343-6-4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 61020 specifies the terminology, symbols, test methods and other necessary
information to provide consistency in detail specifications for electromechanical switches.
This document relates to electromechanical switches intended for use in electrical and
electronic appliances. Switches covered by this document:
a) are devices which open, close, or change the connection of a circuit by the mechanical
motion of conducting parts (contacts);
b) have a maximum rated voltage of 480 V;
c) have a maximum rated current of 63 A.
This document does not include keyboards and keypads which are intended for use in
information-handling systems. Electromechanical key switches can be included under the scope
of this document.
Switch families will be described in any detail specifications that reference this document.
This document is a performance standard intended to describe evaluation methods to better
clarify the capabilities of a switch.
NOTE 1 Safety requirements for switches for household and similar fixed electrical installations are given in
IEC 60669 (all parts).
NOTE 2 Safety requirements for appliance switches are given in IEC 61058 (all parts).

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61020-1:2019 specifies the terminology, symbols, test methods and other necessary information to provide consistency in detail specifications for electromechanical switches.
This document relates to electromechanical switches intended for use in electrical and electronic appliances. Switches covered by this document:
a) are devices which open, close, or change the connection of a circuit by the mechanical motion of conducting parts (contacts);
b) have a maximum rated voltage of 480 V;
c) have a maximum rated current of 63 A.
This third edition cancels and replaces the second edition published in 2009.
This edition includes the following significant technical changes with respect to the previous edition:
a) In accordance with the ISO/IEC Directives, Part 2:2016, Clause 2 General has been replaced by two new clauses: Clause 2 Normative references and Clause 3 Terms, definitions, units and symbols.
2.4 Preferred values and 2.5 Marking have been moved to Clauses 5 and 6. In addition, 6.2 Markings on packaging has been added.
b) Clause 3 Quality assurance procedures and Annex A have been deleted.
c) 4.3.6.3 Returning force has been added.
d) 4.3.6.4 Travel (movement of the actuator) has been added.
e) 4.12 Environmental testing:
4.12.1.3 and 4.12.1.5 have been renumbered 4.12.2 and 4.12.3, respectively. 4.12.1.4 and 4.12.1.7 have been integrated in 4.12.5. 4.12.10 Salt mist has been added.
f) Following publication of IEC 61058-1-1:2016, some cross-references to IEC 61058-1 have been updated.
g) The following items have been updated with respect to the second edition.
- Tables and figures:
Tables 1 and 3 have been deleted, Table 4 has been renumbered to Table 10. New Tables 2, 3, 4, 5, 6, 7, 8 and 9 have been added.
Figure 1 has been renumbered to Figure 3, Figure 2 renumbered to Figure 4, Figure 3 renumbered to Figure 9 and Figure 4 renumbered to Figure 12. Added new Figures 1, 2, 5, 6, 7, 8, 10 and 11 have been added.
- Specific words and common names have been unified.

  • Standard
    177 pages
    English and French language
    sale 15% off

IEC 62625-2:2016 covers the standardized test methods for verifying the compliance of an On board Driving Data Recording System implementation with the requirements specified by IEC 62625-1. It also covers the conformity testing criteria for designed and manufactured ODDRS. This part of IEC 62625 includes the list of the requirements specified by IEC 62625-1 and the relevant acceptance conditions for ODDRS at design review, type test and routine test phases. For the train level design review and train level test phases, this part provides guidelines for the conformity testing methods to be applied to the ODDRS installed on the train.

  • Standard
    116 pages
    English and French language
    sale 15% off

This part of IEC 60876 applies to fibre optic switches possessing all of the following general
features:
– they are passive in that they contain no optoelectronic or other transducing elements;
– they have one or more ports for the transmission of optical power and two or more states
in which power may be routed or blocked between these ports;
– the ports are optical fibres or fibre optic connectors.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61000-3-3:2013 est disponible sous forme de IEC 61000-3-3:2013 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
IEC 61000-3-3:2013 traite des limitations des fluctuations de tension et du papillotement (flicker) appliquées sur le réseau de distribution public basse tension. Elle spécifie les limites des variations de tension pouvant être produites par un équipement essayé dans des conditions spécifiées et formule des recommandations pour les méthodes d'évaluation. Elle s'applique aux matériels électriques et électroniques ayant un courant appelé inférieur ou égal à 16 A par phase et destinés à être raccordés à des réseaux publics de distribution basse tension présentant une tension nominale phase-neutre comprise entre 220 V et 250 V à 50 Hz et non soumis à un raccordement conditionnel. La CEI 61000-3-3 a le statut d'une norme de famille de produit au sein de la série CEI 61000. Cette troisième édition annule et remplace la seconde édition parue en 2008. Cette édition constitue une révision technique qui prend en compte les changements effectués dans la CEI 61000-4-15:2010.

  • Standard
    108 pages
    English language
    sale 15% off
  • Standard
    72 pages
    English language
    sale 15% off
  • Standard
    69 pages
    English and French language
    sale 15% off
  • Standard
    148 pages
    English and French language
    sale 15% off
  • Standard
    138 pages
    English and French language
    sale 15% off

IEC 61020-1:2009 provides consistency in detail specifications for electromechanical switches by specifying the terminology, symbols, test methods and other necessary information. Switches covered by this specification:
- are devices which open, close, or change the connection of a circuit by the mechanical motion of conducting parts (contacts);
- have a maximum rated voltage of 480 V;
- have a maximum rated current of 63 A.
This second edition constitutes a technical revision and includes the following significant technical changes with respect to the previous edition:
- The requirements of the IEC 60512 series of standards have been integrated.
- Other necessary information concerning switches as specified in IEC 60512 have been implemented.
The following items have been updated with respect to the first edition:
- test methods were reviewed for detailed description;
- the explanation for the test method of the operating force was rewritten in more detail;
- the test voltage for measurement for contact bounce was reviewed;
- the electrical endurance "ON" duration in the duty cycle was harmonized with IEC 61058;
- the requirements for fire hazards have been deleted;
- testing methods of surface mounting switches based on the Japanese industrial standard were added.

  • Standard
    139 pages
    English and French language
    sale 15% off

D96/132: CECC/SC 23JX disbanded

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN IEC 62343-3-3 provides a performance specification template for wavelength selective switches. The object is to provide a framework for the preparation of detail specifications on the performance of wavelength selective switches. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this standard shall not be removed from the detail product specifications or performance specifications. The technical information regarding wavelength selective switches, and their applications in DWDM systems will be described in IEC TR 62343-6-4, currently under consideration.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

for use in electrical and electronic appliances. Switches covered by this specification: a) are devices which open, close, or change the connection of a circuit by the mechanical motion of conducting parts (contacts); b) have a maximum rated voltage of 480 V; c) have a maximum rated current of 63 A. This generic specification does not include keyboards and keypads which are intended for use in information-handling systems. Electromechanical key switches may be included under the scope of this generic specification. Switch families shall be described in any detail specifications that will reference this generic specification.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Superseded by EN 61020-1:2009

  • Amendment
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Supersedes CECC 96 500:1992 * D96/132: CECC/SC 23JX disbanded

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D96/132: CECC/SC 23JX disbanded

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61020-1:2009 provides consistency in detail specifications for electromechanical switches by specifying the terminology, symbols, test methods and other necessary information. Switches covered by this specification: - are devices which open, close, or change the connection of a circuit by the mechanical motion of conducting parts (contacts); - have a maximum rated voltage of 480 V; - have a maximum rated current of 63 A. This second edition constitutes a technical revision and includes the following significant technical changes with respect to the previous edition: - The requirements of the IEC 60512 series of standards have been integrated. - Other necessary information concerning switches as specified in IEC 60512 have been implemented. The following items have been updated with respect to the first edition: - test methods were reviewed for detailed description; - the explanation for the test method of the operating force was rewritten in more detail; - the test voltage for measurement for contact bounce was reviewed; - the electrical endurance 'ON' duration in the duty cycle was harmonized with IEC 61058; - the requirements for fire hazards have been deleted; - testing methods of surface mounting switches based on the Japanese industrial standard were added.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D114/004: Withdrawn * Standstill released

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. In addition, requirements are specified for specialized equipment for discontinuous disturbance measurements. The requirements include the measurement of broadband and narrowband types of radio disturbance. Replaces the first edition published in 1993, amendment 1 (1997) as well as consolidated edition 1.1 (1998).

  • Standard
    407 pages
    English and French language
    sale 15% off
  • Standard
    422 pages
    English and French language
    sale 15% off