oSIST prEN IEC 61347-2-2:2023
(Main)Controlgear for electric light sources - Safety - Part 2-2: Particular requirements for electronic step-down convertors for filament lamps
Controlgear for electric light sources - Safety - Part 2-2: Particular requirements for electronic step-down convertors for filament lamps
Geräte für Lampen - Teil 2-2: Besondere Anforderungen an gleich- oder wechselstromversorgte elektronische Konverter für Glühlampen
Appareillages de lampes - Partie 2-2: Exigences particulières pour les convertisseurs abaisseurs électroniques alimentés en courant continu ou alternatif pour lampes à incandescence
Stikalne naprave za sijalke - Varnost - 2-2. del: Posebne zahteve za elektronske pretvornike za žarnice
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61347-2-2:2023
01-september-2023
Stikalne naprave za sijalke - Varnost - 2-2. del: Posebne zahteve za elektronske
pretvornike za žarnice
Controlgear for electric light sources - Safety - Part 2-2: Particular requirements for
electronic step-down convertors for filament lamps
Geräte für Lampen - Teil 2-2: Besondere Anforderungen an gleich- oder
wechselstromversorgte elektronische Konverter für Glühlampen
Appareillages de lampes - Partie 2-2: Exigences particulières pour les convertisseurs
abaisseurs électroniques alimentés en courant continu ou alternatif pour lampes à
incandescence
Ta slovenski standard je istoveten z: prEN IEC 61347-2-2:2023
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
oSIST prEN IEC 61347-2-2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61347-2-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61347-2-2:2023
34C/1579/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61347-2-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-06-23 2023-09-15
SUPERSEDES DOCUMENTS:
34C/1552/CD, 34C/1560A/CC
IEC SC 34C : AUXILIARIES FOR LAMPS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Controlgear for electric light sources - Safety - Part 2-2: Particular requirements for electronic
step-down convertors for filament lamps
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any
part of it, for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61347-2-2:2023
IEC CDV 61347-2-2 © IEC 2023 2 34C/1579/CDV
1 CONTENTS
2 FOREWORD. 3
3 1 Scope . 6
4 2 Normative references . 6
5 3 Terms and definitions . 6
6 4 General requirements . 7
7 5 General notes on tests . 7
8 6 Marking . 7
9 6.1 Marking and information . 7
10 6.1.1 Mandatory marking . 7
11 6.1.2 Information to be provided . 7
12 6.2 Durability and legibility of marking . 7
13 6.3 Built-in and integral controlgear . 7
14 7 Terminals . 7
15 8 Earthing . 8
16 9 Protection against accidental contact with hazardous live parts . 8
17 10 Insulation resistance and electric strength . 8
18 11 Fault conditions . 8
19 12 Construction . 8
20 13 Creepage distances and clearances . 8
21 14 Screws, current-carrying parts and connections . 8
22 15 Resistance to heat, fire and tracking . 8
23 16 Thermal requirements . 8
24 16.1 General . 8
25 16.2 Normal operation . 8
26 16.3 Abnormal operation . 9
27 Annex A (informative) Schedule of more onerous requirements . 10
28
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61347-2-2:2023
IEC CDV 61347-2-2 © IEC 2023 3 34C/1579/CDV
29 INTERNATIONAL ELECTROTECHNICAL COMMISSION
30 ____________
31
32 CONTROLGEAR FOR ELECTRIC LIGHT SOURCES – SAFETY
33 –
34 Part 2-2: Particular requirements for
35 electronic step-down convertors for filament lamps
36
37 FOREWORD
38 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
39 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
40 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
41 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
42 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
43 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
44 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
45 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
46 Standardization (ISO) in accordance with conditions determined by agreement between the tw o organizations.
47 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
48 consensus of opinion on the relevant subjects since each technical committee has representation from all
49 interested IEC National Committees.
50 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
51 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
52 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
53 misinterpretation by any end user.
54 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
55 transparently to the maximum extent possible in their national and regional publications. Any divergence between
56 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
57 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
58 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
59 services carried out by independent certification bodies.
60 6) All users should ensure that they have the latest edition of this publication.
61 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
62 members of its technical committees and IEC National Committees for any personal i njury, property damage or
63 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
64 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
65 Publications.
66 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
67 indispensable for the correct application of this publication.
68 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
69 rights. IEC shall not be held responsible for identifying any or all such patent rights.
70 International Standard IEC 61347-2-2 has been prepared by subcommittee 34C: Auxiliaries for
71 lamps, of IEC technical committee 34: Lighting.
72 This third edition cancels and replaces the second edition published in 2011. This edition
73 constitutes a technical revision.
74
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61347-2-2:2023
IEC CDV 61347-2-2 © IEC 2023 4 34C/1579/CDV
75 This edition includes the following significant technical changes with respect to the previous
76 edition:
77 a) changes in IEC 61347-1 (see ED 4 of IEC 61347-1)
78 – alignment with respect to edition 4 of IEC 61347-1:
79 – introduction of dated references as appropriate
80 b) deletion of the clauses/subclauses which are either no longer relevant or now covered in
81 part 1
82 c) scope extension to 1 500 V for DC
83 d) scope clarification
84 e) deletion of unused definitions
85 f) revision of information and marking requirements
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.