Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1 G

This European Standard specifies the particular requirements for construction, testing and marking of electrical apparatus of equipment group II, conformity Category 1 G as defined in EN 50014:1997. Such apparatus comprises equipment designed to be capable of functioning in conformity with the operational parameters established by the manufacturer and ensuring a very high level of protection. Category 1 G apparatus is intended for use in hazardous areas, in which potentially explosive atmospheres caused by mixtures of air and gases, vapours or mists under normal atmospheric conditions (temperature = -20 °C to +60 °C, pressure = 0,8 bar to 1,1 bar) are present continuously, for long periods or frequently. This standard also applies to apparatus mounted across the boundary between hazardous and less hazardous areas where Category 1 and Category 2 equipment may normally be installed, respectively, for example in the wall of a storage vessel. This standard also makes provision for apparatus installed outside the hazardous area, but electrically connected to apparatus of Category 1 within the hazardous area (associated apparatus).This standard supplements the requirements of EN 50014 to EN 50020 and EN 50028 to adapt the level of safety provided by those standards to the very high level of risk. NOTE: In designing apparatus for operation in a potentially explosive atmosphere under conditions other than the atmospheric conditions given above, this standard may be used as a guide. However, additional testing is recommended related specifically to the intended conditions of use. This is particularly important when the types of protection Flameproof enclosure (EN 50018) and Intrinsic safety (EN 50020) are applied

Spezielle Anforderungen an Konstruktion, Prüfung und Kennzeichnung elektrischer Betriebsmittel der Gerätegruppe II, Kategorie 1 G

Exigences spéciales pour la construction, l'essai et le marquage des matériels électriques des appareils du groupe II, catégorie 1 G

Posebne zahteve za konstruiranje, preskušanje in označevanje električnih naprav skupine opreme II, kategorije 1 G

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
31-Jan-2008
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Jan-2008
Due Date
13-Feb-2008
Completion Date
01-Feb-2008

Relations

Buy Standard

Standard
EN 50284:2000
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50284:2000
01-april-2000
3RVHEQH]DKWHYH]DNRQVWUXLUDQMHSUHVNXãDQMHLQR]QDþHYDQMHHOHNWULþQLKQDSUDY
VNXSLQHRSUHPH,,NDWHJRULMH*
Special requirements for construction, test and marking of electrical apparatus of
equipment group II, Category 1 G
Spezielle Anforderungen an Konstruktion, Prüfung und Kennzeichnung elektrischer
Betriebsmittel der Gerätegruppe II, Kategorie 1 G
Exigences spéciales pour la construction, l'essai et le marquage des matériels
électriques des appareils du groupe II, catégorie 1 G
Ta slovenski standard je istoveten z: EN 50284:1999
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
SIST EN 50284:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50284:2000

---------------------- Page: 2 ----------------------

SIST EN 50284:2000

---------------------- Page: 3 ----------------------

SIST EN 50284:2000

-------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.