Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings

This European Standard specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings, supplied in either tile or roll form. This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

Elastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-Bodenbeläge

Dieses Dokument legt die Eigenschaften von homogenen und heterogenen ebenen (einschließlich genarbten oder geprägten) Elastomer-Bodenbelägen fest, die als Rollen oder in Plattenform geliefert werden. Dieses Dokument enthält ein Klassifizierungssystem auf der Grundlage der Nutzungsintensität, das zeigt, wo für diese Bodenbeläge ein zufriedenstellender Nutzen möglich wäre (siehe EN 685). Dieses Dokument legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc lisse

La présente norme européenne prescrit les caractéristiques générales des revêtements de sol homogènes et
hétérogènes en caoutchouc lisse (y compris ceux à surfaces grainées) fournis en dalles ou en rouleau.
La norme inclut un système de classification basé sur l'intensité d'utilisation, qui indique l'endroit où il convient
que ces revêtements de sol rendent un service satisfaisant (voir l'EN 685). Elle spécifie également les
exigences relatives au marquage.

Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih gumenih talnih oblog

Ta evropski standard določa značilnosti homogenih in heterogenih gladkih (vključno z zrnatimi ali reliefnimi) gumenih talnih oblog, ki so na voljo v ploščah ali zvitku. Ta evropski standard vključuje sistem razvrščanja na osnovi intenzivnosti uporabe, ki kaže, kjer morajo te netekstilne talne obloge omogočati zadovoljivo delovanje (glej EN 685). Določa tudi zahteve za označevanje.

General Information

Status
Withdrawn
Publication Date
12-Jul-2010
Withdrawal Date
11-May-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-May-2020
Due Date
04-Jun-2020
Completion Date
12-May-2020

Relations

Buy Standard

Standard
EN 1817:2010
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih gumenih talnih oblogElastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-BodenbelägeRevêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc lisseResilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:EN 1817:2010SIST EN 1817:2010en,fr,de01-september-2010SIST EN 1817:2010SLOVENSKI
STANDARDSIST EN 1817:19991DGRPHãþD



SIST EN 1817:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1817
June 2010 ICS 97.150 Supersedes EN 1817:1998English Version
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings
Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc lisse
Elastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-Bodenbeläge This European Standard was approved by CEN on 20 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1817:2010: ESIST EN 1817:2010



EN 1817:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 General requirements .55 Classification requirements .66 Marking .6Annex A (informative)
Optional properties .8Bibliography .9 SIST EN 1817:2010



EN 1817:2010 (E) 3 Foreword This document (EN 1817:2010) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1817:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 1817:2010



EN 1817:2010 (E) 4 1 Scope This European Standard specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings, supplied in either tile or roll form. This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 425, Resilient and laminate floor coverin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.