Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts with metric fine pitch thread, with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for sizes D up to and including 16 mm and product grade B for sizes D above 16 mm, and with property classes 8, 10 and 12.

Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) mit metrischem Feingewinde - Festigkeitsklassen 8, 10 und 12 (ISO 10513:2012)

Diese Internationale Norm legt die Eigenschaften von hohen Sechskantmuttern mit Klemmteil (Ganzmetall-muttern) mit Feingewinde mit Gewindenenndurchmessern D von 8 mm bis 36 mm, in Produktklasse A für Größen D bis 16 mm und Produktklasse B für Größen D über 16 mm und mit Festigkeitsklassen 8, 10 und 12 fest.
ANMERKUNG   Die Maße der Muttern entsprechen den in ISO 8674 angegebenen Maßen, mit Ausnahme der Maße mw und hmax.
Werden andere Festlegungen benötigt, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 724, ISO 898 2, ISO 965 2, ISO 2320 und ISO 4759 1.

Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin - Classes de qualité 8, 10 et 12 (ISO 10513:2012)

L'ISO 10513:2012 spécifie les caractéristiques des écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin, de diamètre nominal de filetage D de 8 mm à 36 mm inclus, de grade A pour les diamètres D jusqu'à 16 mm et de grade B pour les diamètres D supérieurs à 16 mm, et de classes de qualité 8, 10 et 12.

Visoke šestrobe zaščitne matice z deformacijo z drobnim metrskim navojem - Razredi trdnosti 8, 10 in 12 (ISO 10513:2012)

Ta mednarodni standard določa značilnosti visokih šestrobih zaščitnih matic z deformacijo z drobnim metrskim navojem z nazivnimi premeri navoja od 8 mm do vključno 36 mm, v razredu izdelave A za velikosti premera do vključno 16 mm in v razredu izdelave B za velikosti premera nad 16 mm, ter z razredi trdnosti 8, 10 in 12.

General Information

Status
Published
Publication Date
28-Mar-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Mar-2013
Due Date
24-May-2013
Completion Date
29-Mar-2013

Relations

Buy Standard

Standard
EN ISO 10513:2013
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10513:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 10513:2001
9LVRNHãHVWUREH]DãþLWQHPDWLFH]GHIRUPDFLMR]GUREQLPPHWUVNLPQDYRMHP
5D]UHGLWUGQRVWLLQ ,62
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property
classes 8, 10 and 12 (ISO 10513:2012)
Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) mit metrischem Feingewinde
- Festigkeitsklassen 8, 10 und 12 (ISO 10513:2012)
Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin - Classes
de qualité 8, 10 et 12 (ISO 10513:2012)
Ta slovenski standard je istoveten z: EN ISO 10513:2012
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.20 Matice Nuts
SIST EN ISO 10513:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10513:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 10513:2013


EUROPEAN STANDARD
EN ISO 10513

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 10513:1997
English Version
Prevailing torque type all-metal hexagon high nuts with metric
fine pitch thread - Property classes 8, 10 and 12 (ISO
10513:2012)
Écrous hexagonaux hauts autofreinés tout métal à filetage Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ
métrique à pas fin - Classes de qualité 8, 10 et 12 (ISO 2, mit metrischem Feingewinde - Festigkeitsklassen 8, 10
10513:2012) und 12 (ISO 10513:2012)
This European Standard was approved by CEN on 13 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10513:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10513:2013
EN ISO 10513:2012 (E)
Contents Page
Foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10513:2013
EN ISO 10513:2012 (E)
Foreword
This document (EN ISO 10513:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10513:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10513:2012 has been approved by CEN as a EN ISO 10513:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10513:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 10513:2013
INTERNATIONAL ISO
STANDARD 10513
Second edition
2012-12-15
Prevailing torque type all-metal hexagon
high nuts with metric fine pitch thread —
Property classes 8, 10 and 12
Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à
pas fin — Classes de qualité 8, 10 et 12
Reference number
ISO 10513:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 10513:2013
ISO 10513:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10513:2013
ISO 10513:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 2
4 Requirements and reference International Standards . 3
5 Designation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.