SIST EN 300 207-4 V1.2.4:2003

• Abstract:

  Test specification for RE/SPS-05065-1 (SCF enhancement)

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 207-4 V1.2.4 (2000-03) - Integrated Services Digital Network (ISDN); Diversion supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

SIST EN 300 207-4 V1.2.4:2003 is the Slovenian adoption of ETSI EN 300 207-4 Version 1.2.4. It specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the user side of Integrated Services Digital Network (ISDN) Diversion supplementary services using the Digital Subscriber Signalling System No. one (DSS1) protocol. It is aimed at conformance testing of implementations at the T reference point, or a coincident S and T reference point, against EN 300 207-1.

What does SIST EN 300 207-4 V1.2.4:2003 specify?

SIST EN 300 207-4 V1.2.4:2003 defines the user-side test specification for ISDN Diversion supplementary services. It gives the abstract tests and the PIXIT questions needed to set up testing, so a laboratory can prepare and run conformance testing in a consistent way.

The document is organized into short clauses for scope, references, definitions, the abstract test method, ATS conventions, mapping, and conformance, followed by three normative annexes.

Annex	What it covers
Annex A	Protocol Conformance Test Report (PCTR) proforma
Annex B	Partial PIXIT proforma
Annex C	Abstract Test Suite (ATS)

The scope states that the document contains two ATSs. One covers CDIV services - Call Forwarding Busy, Call Forwarding Unconditional, Call Forwarding No Response, and Call Deflection - and the other covers SCF services - Selective Call Forwarding Busy, Selective Call Forwarding Unconditional, and Selective Call Forwarding No Response. Common protocol parts are covered by the CDIV ATS.

What are the key requirements of SIST EN 300 207-4 V1.2.4:2003?

Test method and test coverage

Clause 4 uses the remote test method for both the CDIV and SCF user ATSs. The Point of Control and Observation (PCO) named L sits at the service access point between layers 2 and 3 and is used to control and observe the Implementation Under Test (IUT). In practice, this means test verdicts depend on what the tester sees at the protocol interface.

Clause 4 also defines a second PCO named O for operator coordination above the IUT. Events at O do not drive verdicts, but they tell the operator what actions to take on the System Under Test (SUT).

Clause 5 states that there are no untestable test purposes for these ATSs. This matters because the full test purpose set is intended to be executable in conformance testing.

Test notation and encoding

Clause 6 says the ATS uses the version of Tree and Tabular Combined Notation (TTCN) defined in TR 101 101. It also uses ASN.1 where ASN.1 can model data structures better than TTCN alone, where subtype restrictions are useful, and where protocol type definitions must be reproduced.

For ASN.1, the default encoding in this ATS is the ISDN encoding variation, not Basic Encoding Rules (BER). BER is only used when the table header comments explicitly indicate it, so implementers and test tools need to follow the encoding notes in the ATS carefully.

How test cases and reports are tied together

Clause 7 reuses the test purpose identifiers from EN 300 207-3 as test case names. That gives a direct one-to-one map between the test purposes and the ATS test cases, which helps traceability during implementation and lab execution.

Clause 8 requires a Protocol Conformance Test Report (PCTR) that follows the annex A proforma when a laboratory is asked to produce one. Clause 9 requires a partial PIXIT proforma, and for test realization it may be augmented with extra questions needed to prepare the Means of Testing (MOT) for a particular IUT.

Clause 10 requires the MOT and Executable Test Suite (ETS) to comply with ISO/IEC 9646-4. An ETS that conforms to this ATS specification must contain test groups and test cases technically equivalent to at least one ATS in annex C, and each abstract test case must be realizable as an executable testcase.

What terms does SIST EN 300 207-4 V1.2.4:2003 define?

• ATS - Abstract Test Suite, the set of abstract test cases used to check protocol conformance.
• PIXIT - Protocol Implementation eXtra Information for Testing, the implementation-specific information needed to prepare testing.
• PCTR - Protocol Conformance Test Report, the structured report used to record conformance test results.
• IUT - Implementation Under Test, the device or system being checked.
• SUT - System Under Test, the complete system that includes the IUT and its test environment.
• PCO - Point of Control and Observation, the interface where the tester controls and observes protocol behaviour.
• TTCN - Tree and Tabular Combined Notation, the test notation used to specify the ATS.
• SCF - Selective Call Forwarding, the service family covered by one of the two ATSs.

Who uses SIST EN 300 207-4 V1.2.4:2003?

Test laboratories use SIST EN 300 207-4 V1.2.4:2003 to prepare conformance tests, fill in the PCTR, and collect the PIXIT data needed for a specific implementation. Equipment vendors and software teams use it to build or verify user-side ISDN implementations that support diversion services.

Quality managers and buyers use it to check whether a supplier can present test evidence against the same ATS structure and report format. It is also relevant to clients of test laboratories who need to define the SUT, the test setup, and the service variants being exercised.

Which standards are used with SIST EN 300 207-4 V1.2.4:2003?

• EN 300 207-1 - the protocol specification that the tests check.
• EN 300 207-2 - the PICS proforma specification used to describe implementation capabilities.
• EN 300 207-3 - the TSS&TP specification that supplies the test purpose identifiers reused by this ATS.
• EN 300 196-1 - provides ASN.1 definitions that are reproduced in the ATS.
• ETS 300 403-5 - provides the basic call control ATS and PIXIT needed for CDIV testing.
• ISO/IEC 9646 - the conformance testing framework used for methodology, reporting, and executable test realization.
• TR 101 101 - defines the TTCN version used here.
• ISO/IEC 8825-1 - defines BER, CER, and DER encoding rules.

What does the SIST EN 300 207-4 V1.2.4:2003 document contain?

The document contains the abstract test method, the ATS conventions, the mapping from test purposes to test cases, and the conformance rules for PCTR, PIXIT, and ATS realization. Annex A provides the report template with sections for identification, environment, static and dynamic summaries, campaign results, and observations.

Annex B provides the partial PIXIT fields for the test laboratory, client, SUT, protocol identification, parameter values, message-stimulus conditions, and timer values. Annex C provides the CDIV and SCF ATS in both TTCN graphical and machine-processable forms, which are the basis for building and running executable conformance tests.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.L]VPHULWYHQHIntegrated Services Digital Network (ISDN); Diversion supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 207-4 Version 1.2.4SIST EN 300 207-4 V1.2.4:2003en01-december-2003SIST EN 300 207-4 V1.2.4:2003SLOVENSKI
STANDARD
ETSIEN300207-4V1.2.4(2000-03)EuropeanStandard(Telecommunicationsseries)IntegratedServicesDigitalNetwork(ISDN);Diversionsupplementaryservices;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part4:AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuserSIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)2ReferenceREN/SPS-05065-4KeywordsATS,SCF,DSS1,ISDN,PIXIT,supplementaryservices,userETSIPostaladdressF-06921SophiaAntipolisCedex-FRANCEOfficeaddress650RoutedesLucioles-SophiaAntipolisValbonne-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/[e-mail]ETSIdeliverablecanbedownloadedfromhttp://www.etsi.orgIfyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]Ideliverablemaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.CopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1Definitions.73.2Abbreviations.74AbstractTestMethod.85Untestabletestpurposes.86ATSconventions.86.1VersionofTTCNused.86.2UseofASN.1.86.2.1SituationswhereASN.1isused.86.2.2Specificationofencodingrules.97ATStoTPmap.98PCTRconformance.109PIXITconformance.1010ATSconformance.10AnnexA(normative):ProtocolConformanceTestReport(PCTR)proforma.11A.1Identificationsummary.11A.1.1Protocolconformancetestreport.11A.1.2IUTidentification.11A.1.3Testingenvironment.11A.1.4Limitsandreservations.12A.1.5Comments.12A.2IUTconformancestatus.12A.3Staticconformancesummary.12A.4Dynamicconformancesummary.12A.5Staticconformancereviewreport.13A.6Testcampaignreport.13A.6.1TestcampaignreportforCDIV.13A.6.2TestcampaignreportforSCF.17SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)4A.7Observations.19AnnexB(normative):PartialPIXITproforma.20B.1Identificationsummary.20B.2Abstracttestsuitesummary.20B.3Testlaboratory.21B.4Client(ofthetestlaboratory).21B.5SystemUnderTest(SUT).22B.6Protocolinformation.23B.6.1Protocolidentification.23B.6.2Parametervalues.23B.6.3SendingofmessagesbyIUT.23B.6.3.1SendingofmessagesbyIUTforCDIVtesting.23B.6.3.2SendingofmessagesbyIUTforSCFtesting.24B.6.4Timervalues.24AnnexC(normative):AbstractTestSuite(ATS).25C.1TheTTCNGraphicalform(TTCN.GR).25C.2TheTTCNMachineProcessableform(TTCN.MP).25Bibliography.26History.27SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinSR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinSR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeSignallingProtocolandSwitching(SPS).Thepresentdocumentispart4ofamulti-partENcoveringtheDigitalSubscriberSignallingSystemNo.one(DSS1)protocolspecificationfortheIntegratedServicesDigitalNetwork(ISDN)diversionsupplementaryservices,asdescribedbelow:Part1:"Protocolspecification";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuser";Part5:"TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork";Part6:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetwork".NationaltranspositiondatesDateofadoptionofthisEN:25February2000DateoflatestannouncementofthisEN(doa):31May2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30November2000DateofwithdrawalofanyconflictingNationalStandard(dow):30November2000SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)61ScopeThepresentdocumentspecifiestheAbstractTestSuites(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformafortheUsersideoftheTreferencepointorcoincidentSandTreferencepointofimplementationsconformingtothestagethreestandardforthediversionsupplementaryservicesforthepan-EuropeanIntegratedServicesDigitalNetwork(ISDN)bymeansoftheDigitalSubscriberSignallingSystemNo.one(DSS1)protocol,EN300207-1[1].EN300207-3[3]specifiestheTestSuiteStructureandTestPurposes(TSS&TP)relatedtothisATSandpartialPIXITproformaspecification.OtherpartsspecifytheTSS&TPandtheATSandpartialPIXITproformafortheNetworksideoftheTreferencepointorcoincidentSandTreferencepointofimplementationsconformingtoEN300207-1[1].ThepresentdocumentcontainstwoATSsfordifferentpartsoftheprotocol;one(CDIV)forCallForwardingBusy,CallForwardingUnconditional,CallForwardingNoResponseandCallDeflectionandtheother(SCF)forSelectiveCallForwardingBusy,SelectiveCallForwardingUnconditionalandSelectiveCallForwardingNoResponse.CommonpartsoftheprotocolarecoveredbytheCDIVATS.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.•Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.•Foraspecificreference,subsequentrevisionsdonotapply.•Foranon-specificreference,thelatestversionapplies.•Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300207-1(V1.2):"IntegratedServicesDigitalNetwork(ISDN);Diversionsupplementaryservices;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part1:Protocolspecification".[2]ETSIEN300207-2(V1.2):"IntegratedServicesDigitalNetwork(ISDN);Diversionsupplementaryservices;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part2:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[3]ETSIEN300207-3(V1.2):"IntegratedServicesDigitalNetwork(ISDN);Diversionsupplementaryservices;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part3:TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser".[4]ETSIEN300196-1:"IntegratedServicesDigitalNetwork(ISDN);Genericfunctionalprotocolforthesupportofsupplementaryservices;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part1:Protocolspecification".NOTE:ETSIEN300207-1[1]hasanundatedreferencetoETSIEN300196-1[4].SomeASN.1definitionsfromETSIEN300196-1[4]arereferencedbyETSIEN300207-1andarereproducedintheTTCNATSsinthepresentdocument.TheversionofthesedefinitionsusedinthepresentdocumentarebasedonthoseinETSIEN300196-1(V1.2).[5]Void.[6]Void.[7]Void.SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)7[8]ETSIETS300403-5:"IntegratedServicesDigitalNetwork(ISDN);DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Signallingnetworklayerforcircuit-modebasiccallcontrol;Part5:AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuser".[9]ISO/IEC9646(allparts):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework".[10]ETSITR101101(V1.1):"MethodsforTestingandSpecification(MTS);TTCNinterimversionincludingASN.11994support[ISO/IEC9646-3](SecondEditionMock-upforJTC1/SC21Review)".[11]ISO/IEC8825-1(1994):"Informationtechnology;ASN.1encodingrules:SpecificationofBasicEncodingRules(BER),CanonicalEncodingRules(CER)andDistinguishedEncodingRules(DER)"(SeealsoITU-TRecommendationX.690:1994).3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninISO/IEC9646[9]apply.3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATSAbstractTestSuiteBERBasicEncodingRulesCDCallDeflectionCDIVCallDIVersion(thisisusedtorefercollectivelytotheCD,CFB,CFNRandCFUservices)CFBCallForwardingBusyCFNRCallForwardingNoReplyCFUCallForwardingUnconditionalETSExecutableTestSuiteIUTImplementationUnderTestLTLowerTesterMOTMeansOfTestingPCOPointofControlandObservationPDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingSCFSelectiveCallForwarding(thisisusedtorefercollectivelytotheSCFB,SCFNRandSCFUservices)SCFBSelectiveCallForwardingBusySCFNRSelectiveCallForwardingNoReplySCFUSelectiveCallForwardingUnconditionalSUTSystemUnderTestTPTestPurposeTTCNTreeandTabularCombinedNotationSIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)84AbstractTestMethodTheremotetestmethodisappliedfortheCDIVandSCFuserATSs.APointofControlandObservation(PCO)residesattheserviceaccesspointbetweenlayers2and3inthetestsystem.ThisPCOisnamed"L"(forLower).TheLPCOisusedtocontrolandobservethebehaviouroftheImplementationUnderTest(IUT)andtestcaseverdictsareassigneddependingonthebehaviourobservedatthisPCO.Asecond"informal"PCO,called"O"(forOperator)isusedtospecifycontrolbutnotobservationabovetheIUT;eventsatthisPCOareneverusedtogeneratetestcaseverdicts.MessagessentbythetesteratthisPCOexplicitlyindicatetotheoperatoractionswhicharetobeperformedontheSUT.Thisisregardedasapreferredalternativetotheuseoftheimplicitsendevent.TesterInformaltestco-ordinationbyoperatorSUTUpperlayer(s)LTIUTPCOLLayer2Layer2Layer1Layer1ServiceproviderFigure1:RemotetestmethodwithPCOOfortestco-ordination5UntestabletestpurposesTherearenountestabletestpurposesassociatedwiththeseATSs.6ATSconventions6.1VersionofTTCNusedTheversionofTTCNusedisthatdefinedinTR101101[10].6.2UseofASN.16.2.1SituationswhereASN.1isusedASN.1hasbeenusedforthreemajorreasons.First,typesdefinedinASN.1canmodelproblemsthat"pure"TTCNcannot.Forinstance,datastructuresmodellingorderedorunorderedsequencesofdataarepreferablydefinedinASN.1.Second,ASN.1providesabetterrestrictionmechanismfortypedefinitionsbyusingsub-typedefinitions.Third,itisnecessarytouseASN.1toreproducethetypedefinitionsforremoteoperationcomponentsspecifiedinthebasestandardsinASN.1.SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)9ThepossibilitytouseTTCNandASN.1incombinationisused,i.e.referringtoanASN.1typefromaTTCNtype.6.2.2SpecificationofencodingrulesThereisavariationintheencodingrulesappliedtoASN.1typesandconstraintsspecifiedinthisATSandthereforeamechanismisneededtodifferentiatetheencodingrules.HoweverthemechanismspecifiedinISO/IEC9646-3/AM2[9]andinTR101101[10]doesnotfacilitatedefinitionoftheencodingrulesasneededforthisATS.AsolutionisthereforeusedwhichisbroadlyinthespiritofISO/IEC9646-3/AM2[9]inwhichcommentfieldshavebeenusedasameansofencodingrules.ForASN.1usedinthisATS,twovariationsofencodingrulesareused.OneisthecommonlyknownBasicEncodingRules(BER)asspecifiedinISO/IEC8825-1[11].InthesecondcasetheencodingisaccordingtoISDN,i.e.theASN.1datatypesarearepresentationofstructurescontainedwithintheISDNspecification(basiccall,Genericfunctionalprotocolorindividualsupplementaryservice).Forexample,ifoctetsofaninformationelementarespecifiedinASN.1asaSEQUENCEthenthisshouldbeencodedinanExecutableTestSuite(ETS)asanyotherISDNinformationelementspecifiedusingtabularTTCN.ThisISDNencodingvariationisthedefaultencodingruleforthisATS.ThismeansthatallASN.1constrainttablesareencodedusingISDN(non-BER)encodingunlessstatedotherwise.BERencodingshallnotbeappliedtoanASN.1constraintwhereBERencodinghasnotbeenspecified.Thisencodingruleissometimesnamed"DirectEncoding".ForBERencoding,anindicationisgiveninthecommentsfieldofthetableheader.ForthisATSsuchindicationsappearintheASN.1typeconstraintdeclarationtablesonly.Inthefirstlineofthetableheadercommentfield,thenotation"ASN1_Encoding:BER"isused.NotethatwithinBER,thereareanumberofvariationsfortheencodingoflengthsoffields.AccordingtoEN300196-1[4],anIUTshouldbeabletointerpretalllengthformswithinBERforreceivedPDUs.WhensendingPDUscontainingBERencoding,EN300196-1[4]givesguidelinesbutmakesnorestrictionsonthelengthformswithinBERwhichanIUTmayapply.InthisparticularATSallASN.1typeconstraintswhichareoftype"Component"aretobeencodedusingBER.Table1:ASN.1typeconstraintdeclarationshowinguseofencodingvariationASN.1TypeConstraintDeclarationConstraintName:Beg3PTYinvASN.1Type:ComponentDerivationPath:Comments:ASN1_Encoding:BERReceivecomponent:BeginECTinvokecomponentDescriptionbegin3PTY_Componentsbegin3PTY_InvokeComp{invokeID?,operation_valuelocalValue4}Detailedcomments:7ATStoTPmapTheidentifiersusedfortheTPsseeEN300207-3[3]arereusedastestcasenames.Thusthereisastraightforwardone-to-onemapping.SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)108PCTRconformanceAtestlaboratory,whenrequestedbyaclienttoproduceaPCTR,isrequired,asspecifiedinISO/IEC9646-5[9],toproduceaPCTRconformantwiththePCTRtemplategiveninannexBofISO/IEC9646-5[9].Furthermore,atestlaboratory,offeringtestingforeitherATSspecificationcontainedinannexC,whenrequestedbyaclienttoproduceaPCTR,isrequiredtoproduceaPCTRconformantwiththePCTRproformacontainedinannexA.APCTRwhichconformstothisPCTRproformaspecificationshallpreservethecontentandorderingoftheclausescontainedinannexAexceptthateitherA.6.1orA.6.2maybeomitted.ClauseA.6ofthePCTRmaycontainadditionalcolumns.Ifincluded,theseshallbeplacedtotherightoftheexistingcolumns.Textinitalicsmayberetainedbythetestlaboratory.9PIXITconformanceAtestrealizer,producinganexecutabletestsuiteforeitherATSspecificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-4[9],toproduceanaugmentedpartialPIXITproformaconformantwiththispartialPIXITproformaspecification.AnaugmentedpartialPIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexBexceptasindicatedbelow.TheaugmentedpartialPIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparetheMeansOfTesting(MOT)foraparticularIUT.Atestlaboratory,offeringtestingforeitherATSspecificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-5[9],tofurtheraugmenttheaugmentedpartialPIXITproformatoproduceaPIXITproformaconformantwiththispartialPIXITproformaspecification.APIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexBexceptasindicatedbelow.ThePIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparethetestlaboratoryforaparticularIUT.InanaugmentedpartialPIXITproformaorPIXITproformaapplicabletotestingtoonlyoneoftheATSsinthepresentdocumenttheitemsinannexBforwhichresponsesareonlyrequiredfortestingtotheotherATSmaybeomitted.10ATSconformanceThetestrealizer,producingMOTandETSforthisATSspecification,shallcomplywiththerequirementsofISO/IEC9646-4[9].Inparticular,theseconcerntherealizationofanETSbasedoneachATS.ThetestrealizershallprovideastatementofconformanceoftheMOTtothisATSspecification.AnENwhichconformstothisATSspecificationshallcontaintestgroupsandtestcaseswhicharetechnicallyequivalenttothosecontainedinatleastoneATSinannexC.Allsequencesoftesteventscomprisinganabstracttestcaseshallbecapableofbeingrealizedintheexecutabletestcase.AnyfurthercheckingwhichthetestsystemmightbecapableofperformingisoutsidethescopeofthisATSspecificationandshallnotcontributetotheverdictassignmentforeachtestcase.TestlaboratoriesrunningconformancetestservicesusingthisATSshallcomplywithISO/IEC9646-5[9].AtestlaboratorywhichclaimstoconformtothisATSspecificationshalluseanMOTwhichconformstothisATS.SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)11AnnexA(normative):ProtocolConformanceTestReport(PCTR)proformaNotwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePCTRproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPCTR.A.1IdentificationsummaryA.1.1ProtocolconformancetestreportPCTRnumber:PCTRdate:CorrespondingSCTRnumber:CorrespondingSCTRdate:Testlaboratoryidentification:Testlaboratorymanager:Signature:A.1.2IUTidentificationName:Version:Protocolspecification:EN300207-1Name(s)ofservice(s)testedPICS:PreviousPCTRs(ifany):A.1.3TestingenvironmentPIXITReferencenumber:ATSSpecification:EN300207-4CDIV/SCF(DeleteCDIVorSCFasapplicable)AbstractTestMethod:Remotetestmethod(seeISO/IEC9646-2)MeansofTestingidentification:Datesoftesting:Conformancelogreference(s):Retentiondateforlogreference(s):SIST EN 300 207-4 V1.2.4:2003

ETSIETSIEN300207-4V1.2.4(2000-03)12A.1.4LimitsandreservationsAdditionalinformationrelevanttothetechnicalcontentsorfurtheruseofthetestreport,ortotherightsandobligationsofthetestlaboratoryandtheclient,maybegivenhere.Suchinformationmayincluderestrictiononthepublicationofthereport.A.1.5CommentsAdditionalcommentsmaybegivenbyeithertheclientorthetestlaboratoryonanyofthecontentsofthePCTR,forexample,tonotedisagreementbetweenthetwoparties.A.2IUTconformancestatusThisIUThas/hasnotbeenshownbyconformanceassessmenttobenon-conformingtothespecifiedprotocolspecification.Striketheappropriatewordsinthissentence.IfthePICSforthisIUTisconsistentwiththestaticconformancerequirements(asspecifiedinclauseA.3ofthisreport)andthereareno"FAIL"verdictstoberecorded(inclauseA.6)striketheword"has",otherwisestrikethewords"hasnot".A.3StaticconformancesummaryThePICSforthisIUTis/isnotconsistentwiththestaticconformancerequirementsinthespecifiedprotocol.Striketheappropriatewordsinthissentence.A.4DynamicconformancesummaryThetestcampaigndid/didnotrevealerrorsintheIUT.Striketheappropriatewordsinthissentence.Ifthereareno"FAIL"verdictstoberecorded(inclauseA.6ofthisreport)striketheword"did",otherwisestrikethewords"didnot".Summaryoftheresultsofgroupsoftests:.
...