SIST EN ISO 7380-1:2011
(Main)Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
This International Standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 and ISO 4759-1.
Halbrundkopfschrauben (abgeflacht) - Teil 1: Abgeflachter Halbrundkopf mit Innensechskant (ISO 7380-1:2011)
Diese Internationale Norm legt die Eigenschaften von Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant und Gewinden von M3 bis einschließlich M16 in Produktklasse A sowie eingeschränkter Belastbarkeit nach Tabelle 3 fest.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 und ISO 4759-1.
Vis à tête cylindrique bombée plate - Partie 1: Vis à tête cylindrique bombée plate à six pans creux (ISO 7380-1:2011)
L'ISO 7380-1:2011 spécifie les caractéristiques des vis à tête cylindrique bombée plate à six pans creux, à capacité de charge réduite, de diamètres de filetage M3 à M16 inclus, et de grade A.
Vijaki s sploščeno polkrožno glavo - 1. del: Sploščena polkrožna glava z notranjim šestkotnikom (ISO 7380-1:2011)
Ta mednarodni standard določa značilnosti vijakov s sploščeno polkrožno glavo z notranjim šestkotnikom z navoji od M3 do vključno M16 razreda izdelave A in z znižano nosilnostjo skladno s preglednico 3. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, tj. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 in ISO 4759-1.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Halbrundkopfschrauben (abgeflacht) - Teil 1: Abgeflachter Halbrundkopf mit Innensechskant (ISO 7380-1:2011)Vis à tête cylindrique bombée plate - Partie 1: Vis à tête cylindrique bombée plate à six pans creux (ISO 7380-1:2011)Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 7380-1:2011SIST EN ISO 7380-1:2011en,fr01-oktober-2011SIST EN ISO 7380-1:2011SLOVENSKI
STANDARDSIST EN ISO 7380:20041DGRPHãþD
SIST EN ISO 7380-1:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7380-1
August 2011 ICS 21.060.10 Supersedes EN ISO 7380:2004English Version
Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
Vis à tête cylindrique bombée plate - Partie 1: Vis à tête cylindrique bombée plate à six pans creux (ISO 7380-1:2011)
Halbrundkopfschrauben (abgeflacht) - Teil 1: Abgeflachter Halbrundkopf mit Innensechskant (ISO 7380-1:2011) This European Standard was approved by CEN on 22 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 7380-1:2011: ESIST EN ISO 7380-1:2011
EN ISO 7380-1:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 7380-1:2011
EN ISO 7380-1:2011 (E) 3 Foreword This document (EN ISO 7380-1:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document, together with EN ISO 7380-2:2011, supersedes EN ISO 7380:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 7380-1:2011 has been approved by CEN as a EN ISO 7380-1:2011 without any modification.
SIST EN ISO 7380-1:2011
SIST EN ISO 7380-1:2011
Reference numberISO 7380-1:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO7380-1First edition2011-08-01Button head screws — Part 1: Hexagon socket button head screws Vis à tête cylindrique bombée plate — Partie 1: Vis à tête cylindrique bombée plate à six pans creux
SIST EN ISO 7380-1:2011
ISO 7380-1:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
SIST EN ISO 7380-1:2011
ISO 7380-1:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 7380-1 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with metric external thread. This first edition of ISO 7380-1 cancels and replaces ISO 7380:2004, which has been technically revised. ISO 7380 consists of the following parts, under the general title Button head screws: ⎯ Part 1: Hexagon socket button head screws ⎯ Part 2: Hexagon socket button head screws with collar
SIST EN ISO 7380-1:2011
SIST EN ISO 7380-1:2011
INTERNATIONAL STANDARD ISO 7380-1:2011(E) © ISO 2011 – All rights reserved 1 Button head screws — Part 1: Hexagon socket button head screws 1 Scope This International Standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 and ISO 4759-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions ISO 261, ISO general purpose metric screw threads — General plan ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread ISO 965-2, ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality ISO 965-3, ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads ISO 3269, Fasteners — Acceptance inspection ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs ISO 4042, Fasteners
...
SLOVENSKI STANDARD
oSIST prEN ISO 7380-1:2010
01-februar-2010
9LMDNLVVSORãþHQRSRONURåQRJODYRLQQRWUDQMLPãHVWNRWQLNRPGHO 6SORãþHQD
SRONURåQDJODYD REOLNDJODYH$ ,62',6
Hexagon socket button head screws - Part 1: Button head (head shape A) (ISO/DIS
7380-1:2009)
Halbrundkopfschrauben (abgeflacht) mit Innensechskant - Teil 1: Abgeflachter
Halbrundkopf (Kopfform A) (ISO/DIS 7380-1:2009)
Vis à tête cylindrique bombée plate à six pans creux - Partie 1 : Tête bombée (forme A)
(ISO/DIS 7380-1:2009)
Ta slovenski standard je istoveten z: prEN ISO 7380-1
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN ISO 7380-1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 7380-1:2010
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7380-1:2010
EUROPEAN STANDARD
DRAFT
prEN ISO 7380-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2009
ICS 21.060.10 Will supersede EN ISO 7380:2004
English Version
Hexagon socket button head screws - Part 1: Button head (head
shape A) (ISO/DIS 7380-1:2009)
Vis à tête cylindrique bombée plate à six pans creux - Halbrundkopfschrauben (abgeflacht) mit Innensechskant -
Partie 1: Tête cylindrique bombée (forme de tête A) Teil 1: Abgeflachter Halbrundkopf (Kopfform A) (ISO/DIS
(ISO/DIS 7380-1:2009) 7380-1:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 185.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 7380-1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7380-1:2010
prEN ISO 7380-1:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7380-1:2010
prEN ISO 7380-1:2009 (E)
Foreword
This document (prEN ISO 7380-1:2009) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 7380:2004.
Endorsement notice
The text of ISO/DIS 7380-1:2009 has been approved by CEN as a prEN ISO 7380-1:2009 without any
modification.
3
---------------------- Page: 5 ----------------------
oSIST prEN ISO 7380-1:2010
---------------------- Page: 6 ----------------------
oSIST prEN ISO 7380-1:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 7380-1
ISO/TC 2/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2009-11-05 2010-04-05
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Hexagon socket button head screws —
Part 1:
Button head (head shape A)
Vis à tête cylindrique bombée plate à six pans creux —
Partie 1: Tête cylindrique bombée (forme de tête A)
ICS 21.060.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2009
---------------------- Page: 7 ----------------------
oSIST prEN ISO 7380-1:2010
ISO/DIS 7380-1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 7380-1:2010
ISO/DIS 7380-1
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7380-1 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product
standards for fasteners.
This standard cancels and replaces the first edition (ISO 7380:2004), which has been technically revised.
ISO 7380 consists of the following parts, under the general title Hexagon socket button head screws:
⎯ Part 1: Button head (Head shape A)
⎯ Part 2: Button head with collar (Head shape B)
© ISO 2009 – All rights reserved iii
--------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.