EN ISO 7380-1:2011

Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)

ISO 7380-1:2011 specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability.

Schrauben mit abgeflachtem Halbrundkopf - Teil 1: Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant (ISO 7380-1:2011)

Diese Internationale Norm legt die Eigenschaften von Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant und Gewinden von M3 bis einschließlich M16 in Produktklasse A sowie eingeschränkter Belastbarkeit nach Tabelle 3 fest.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 und ISO 4759-1.

Vis à tête cylindrique bombée plate - Partie 1: Vis à tête cylindrique bombée plate à six pans creux (ISO 7380-1:2011)

L'ISO 7380-1:2011 spécifie les caractéristiques des vis à tête cylindrique bombée plate à six pans creux, à capacité de charge réduite, de diamètres de filetage M3 à M16 inclus, et de grade A.

Vijaki s sploščeno polkrožno glavo - 1. del: Sploščena polkrožna glava z notranjim šestkotnikom (ISO 7380-1:2011)

Ta mednarodni standard določa značilnosti vijakov s sploščeno polkrožno glavo z notranjim šestkotnikom z navoji od M3 do vključno M16 razreda izdelave A in z znižano nosilnostjo skladno s preglednico 3. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, tj. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 in ISO 4759-1.

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2011
• Withdrawal Date: 10-Jan-2023
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Jan-2023
• Ref Project: SIST EN ISO 7380-1:2011 - Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)

Relations

• Replaces: EN ISO 7380:2004 - Hexagon socket button head screws (ISO 7380:2004)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 7380-1:2023 - Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
• Effective Date: 19-Jun-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Halbrundkopfschrauben (abgeflacht) - Teil 1: Abgeflachter Halbrundkopf mit Innensechskant (ISO 7380-1:2011)Vis à tête cylindrique bombée plate - Partie 1: Vis à tête cylindrique bombée plate à six pans creux (ISO 7380-1:2011)Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 7380-1:2011SIST EN ISO 7380-1:2011en,fr01-oktober-2011SIST EN ISO 7380-1:2011SLOVENSKI
STANDARDSIST EN ISO 7380:20041DGRPHãþD



SIST EN ISO 7380-1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7380-1
August 2011 ICS 21.060.10 Supersedes EN ISO 7380:2004English Version
Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
Vis à tête cylindrique bombée plate - Partie 1: Vis à tête cylindrique bombée plate à six pans creux (ISO 7380-1:2011)
Halbrundkopfschrauben (abgeflacht) - Teil 1: Abgeflachter Halbrundkopf mit Innensechskant (ISO 7380-1:2011) This European Standard was approved by CEN on 22 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 7380-1:2011: ESIST EN ISO 7380-1:2011



EN ISO 7380-1:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 7380-1:2011



EN ISO 7380-1:2011 (E) 3 Foreword This document (EN ISO 7380-1:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document, together with EN ISO 7380-2:2011, supersedes EN ISO 7380:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 7380-1:2011 has been approved by CEN as a EN ISO 7380-1:2011 without any modification.
SIST EN ISO 7380-1:2011



SIST EN ISO 7380-1:2011



Reference numberISO 7380-1:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO7380-1First edition2011-08-01Button head screws — Part 1: Hexagon socket button head screws Vis à tête cylindrique bombée plate — Partie 1: Vis à tête cylindrique bombée plate à six pans creux
SIST EN ISO 7380-1:2011



ISO 7380-1:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Publ
...