oSIST prEN ISO 11357-6:2024

Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024)

ISO 11357-6:2018 specifies methods for the determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) of polymeric materials by means of differential scanning calorimetry (DSC). It is applicable to polyolefin resins that are in a fully stabilized or compounded form, either as raw materials or finished products. It can be applicable to other plastics.

Kunststoffe - Dynamische Differenzkalorimetrie (DSC) - Teil 6: Bestimmung der Oxidations-Induktionszeit (isothermische OIT) und Oxidations-Induktionstemperatur (dynamische OIT) (ISO/DIS 11357-6:2024)

Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6: Détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique) (ISO/DIS 11357-6:2024)

ISO 11357-6:2018 spécifie des méthodes de détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique) des matériaux polymères au moyen de l'analyse calorimétrique différentielle (DSC). Elle s'applique aux résines polyoléfines sous forme totalement stabilisée ou sous forme de composition, soit comme matières premières, soit comme produits finis. Elle peut s'appliquer à d'autres plastiques.

Polimerni materiali - Diferenčna dinamična kalorimetrija (DSC) - 6. del: Ugotavljanje časa indukcijske oksidacije (izotermični OIT) in temperature indukcijske oksidacije (izodinamični OIT) (ISO/DIS 11357-6:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Apr-2024
• ICS: 17.200.10 - Heat. Calorimetry
• ICS: 83.080.01 - Plastics in general
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 16-Feb-2024
• Due Date: 05-Jul-2024
• Ref Project: prEN ISO 11357-6 - Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/DIS 11357-6:2024)

Relations

• Revises: SIST EN ISO 11357-6:2018 - Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
• Effective Date: 01-Nov-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 11357-6:2024
01-april-2024
Polimerni materiali - Diferenčna dinamična kalorimetrija (DSC) - 6. del:
Ugotavljanje časa indukcijske oksidacije (izotermični OIT) in temperature
indukcijske oksidacije (izodinamični OIT) (ISO/DIS 11357-6:2024)
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation
induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
(ISO/DIS 11357-6:2024)
Kunststoffe - Dynamische Differenzkalorimetrie (DSC) - Teil 6: Bestimmung der
Oxidations-Induktionszeit (isothermische OIT) und Oxidations-Induktionstemperatur
(dynamische OIT) (ISO/DIS 11357-6:2024)
Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6: Détermination du
temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à
l'oxydation (OIT dynamique) (ISO/DIS 11357-6:2024)
Ta slovenski standard je istoveten z: prEN ISO 11357-6
ICS:
17.200.10 Toplota. Kalorimetrija Heat. Calorimetry
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 11357-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11357-6:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11357-6:2024
DRAFT
International
Standard
ISO/DIS 11357-6
ISO/TC 61/SC 5
Plastics — Differential scanning
Secretariat: DIN
calorimetry (DSC) —
Voting begins on:
Part 6: 2024-02-07
Determination of oxidation
Voting terminates on:
2024-05-01
induction time (isothermal
OIT) and oxidation induction
temperature (dynamic OIT)
Plastiques — Analyse calorimétrique différentielle (DSC) —
Partie 6: Détermination du temps d'induction à l'oxydation (OIT
isotherme) et de la température d'induction à l'oxydation (OIT
dynamique)
ICS: 83.080.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 11357-6:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11357-6:2024
DRAFT
ISO/DIS 11357-6:2024(en)
International
Standard
ISO/DIS 11357-6
ISO/TC 61/SC 5
Plastics — Differential scanning
Secretariat: DIN
calorimetry (DSC) —
Voting begins on:
Part 6:
Determination of oxidation
Voting terminates on:
induction time (isothermal
OIT) and oxidation induction
temperature (dynamic OIT)
Plastiques — Analyse calorimétrique différentielle (DSC) —
Partie 6: Détermination du temps d'induction à l'oxydation (OIT
isotherme) et de la température d'induction à l'oxydation (OIT
dynamique)
ICS: 83.080.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 11357-6:2023(en)
© ISO 2023
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11357-6:2024
ISO/DIS 11357-6:2023(en)
Contents Page
Foreword .
...