SIST EN 61340-3-1:2002

Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) - Component testing

Describes the discharge current waveforms used to define the HBM and the basic equipment requirements used to develop these waveforms. Test parameters are defined for testing and classifying the electrostatic discharge (ESD) sensitivity of non-powered devices to the HBM. The purpose of this standard is to establish a test model that will replicate HBM failures and will define the HBM transient current discharge waveform and all necessary test parameters to ensure reliable, reproducible test results. Reproducible data will allow accurate comparisons of HBM ESD sensitivity levels.

Elektrostatik -- Teil 3-1: Verfahren zur Simulation elektrostatischer Entladung - Human body model (HBM) - Bauelementeprüfung

Electrostatique -- Partie 3-1: Méthodes pour la simulation des effets électrostatiques - Modèle du corps humain (HBM) - Essais des composants

Décrit les formes d'onde de courant de décharge utilisées pour définir le HBM et les prescriptions d'appareils de base utilisés pour développer ces formes d'onde. Les paramètres d'essai sont définis pour les essais et la classification de la sensibilité des décharges électrostatiques (ESD) des composants électroniques dispositifs de faible puissance au HBM. L'objet de cette norme est d'établir un modèle d'essai qui reproduit des défaillances du HBM et définit la forme de la décharge de courant transitoire du HBM et tous les paramètres d'essai nécessaires pour assurer des résultats d'essai fiableset reproductibles. Les données reproductibles permettent des comparaisons précises des niveaux de sensibilité des décharges électrostatiques (ESD) du HBM.

Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) - Component testing

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 19-Jul-2018
• ICS: 17.220.99 - Other standards related to electricity and magnetism
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Jul-2018
• Due Date: 12-Aug-2018
• Completion Date: 20-Jul-2018
• Ref Project: EN 61340-3-1:2002 - Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) - Component testing

Relations

• Replaced By: SIST EN 61340-3-1:2008 - Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 61340-3-1:2008 - Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 61340-3-1:2008 - Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
• Effective Date: 01-Jun-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61340-3-1:2002
01-september-2002
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human
body model (HBM) - Component testing
Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body
model (HBM) - Component testing
Elektrostatik -- Teil 3-1: Verfahren zur Simulation elektrostatischer Entladung - Human
body model (HBM) - Bauelementeprüfung
Electrostatique -- Partie 3-1: Méthodes pour la simulation des effets électrostatiques -
Modèle du corps humain (HBM) - Essais des composants
Ta slovenski standard je istoveten z: EN 61340-3-1:2002
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
SIST EN 61340-3-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61340-3-1:2002

---------------------- Page: 2 ----------------------

SIST EN 61340-3-1:2002
EUROPEAN STANDARD EN 61340-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2002
ICS 17.220.99;29.020
English version
Electrostatics
Part 3-1: Methods for simulation of electrostatic effects -
Human body model (HBM) -
Component testing
(IEC 61340-3-1:2002)
Electrostatique Elektrostatik
Partie 3-1: Méthodes pour la simulation Teil 3-1: Verfahren zur Simulation
des effets électrostatiques - elektrostatischer Entladung -
Modèle du corps humain (HBM) - Human body model (HBM) -
Essais des composants Bauelementeprüfung
(CEI 61340-3-1:2002) (IEC 61340-3-1:2002)
This European Standard was approved by CENELEC on 2002-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions
...