SIST EN 61300-3-45:2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (IEC 61300-3-45:2011)

The purpose of this part of IEC 61300 is to describe the procedure required to measure the statistical distribution and mean attenuation for random mated optical connectors with physical contact (PC) and angled physical contact (APC) polished 1-row multi-fibre rectangular ferrules as defined in the IEC 61754 series. This measurement method is applicable to cable assemblies.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-45: Untersuchungen und Messungen - Dämpfung von zufällig gesteckten Mehrfasersteckverbindern (IEC 61300-3-45:2011)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-45: Examens et mesures - Affaiblissement dû à l'accouplement de connecteurs quelconques multifibres (I EI61300-3-45:2011)

La CEI 61300-3-45:2011 est de décrire la procédure nécessaire pour mesurer la distribution statistique et l'affaiblissement moyen des connecteurs optiques connectés sans choix préalable avec férules rectangulaires polies multifibres à contact physique (PC), et à contact physique avec angle (APC) à 1 rangée, comme défini dans la série CEI 61754. Cette méthode de mesure est applicable aux cordons.

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-45. del: Preiskave in meritve - Slabljenje naključno spojenih večvlakenskih konektorjev (IEC 61300-3-45:2011)

Namen tega dela IEC 61300 je opisati postopek, potreben za merjenje statistične porazdelitve in povprečnega slabljenja naključno spojenih poliranih enovrstičnih večvlakenskih konektorjev, ki se fizično stikajo pod pravim kotom (PC) ali pod kotom (APC), s pravokotnimi spojkami, kot je opredeljeno v seriji IEC 61754. Ta metoda velja za kabelske sestave.

General Information

• Status: Withdrawn
• Publication Date: 10-Jul-2011
• Withdrawal Date: 20-Aug-2024
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Aug-2024
• Due Date: 12-Sep-2024
• Completion Date: 21-Aug-2024
• Ref Project: EN 61300-3-45:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors

Relations

• Revised: SIST EN IEC 61300-3-45:2023 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (IEC 61300-3-45:2023)
• Effective Date: 13-Oct-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2011
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHLVNDYHLQPHULWYH6ODEOMHQMHQDNOMXþQRVSRMHQLK
YHþYODNHQVNLKNRQHNWRUMHY,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-45: Examinations and measurements - Attenuation of
random mated multi-fibre connectors (IEC 61300-3-45:2011)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-45: Untersuchungen und Messungen - Dämpfung von zufällig
gesteckten Mehrfasersteckverbindern (IEC 61300-3-45:2011)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 3-45: Examens et mesures -
Affaiblissement dû à l'accouplement de connecteurs quelconques multifibres (I EI61300-
3-45:2011)
Ta slovenski standard je istoveten z: EN 61300-3-45:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-3-45
NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-45: Examinations and measurements -
Attenuation of random mated multi-fibre connectors
(IEC 61300-3-45:2011)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 3-45: Examens et mesures - Teil 3-45: Untersuchungen und
Affaiblissement dû à l'accouplement de Messungen -
connecteurs quelconques multifibres Dämpfung von zufällig gesteckten
(CEI 61300-3-45:2011) Mehrfasersteckverbindern
(IEC 61300-3-45:2011)
This European Standard was approved by CENELEC on 2011-06-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-45:2011 E
Foreword
The text of document 86B/3177/FDIS, future edition 1 of IEC 61300-3-45, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-45 on 2011-06-16.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-03-16
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-06-16
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-45:2011 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61300-3-45:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
IEC 61300-3-35 - Fibre optic interconnecting devices and EN 61300-3-35 -
passive components - Basic test and
measurement procedures -
Part 3-35: Examinations and measurements -
Fibre optic cylindrical connector endface
visual and automated inspection

IEC 61754 Series Fibre optic connector interfaces EN 61754 Series

IEC 61300-3-45 ®
Edition 1.0 2011-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 3-45: Examinations and measurements – Attenuation of random mated
multi-fibre connectors
Dispositifs d'interconnexion et composants passifs à fibres optiques – Méthodes
fondamentales d'essais et de mesures –
Partie 3-45: Examens et mesures – Affaiblissement dû à l'accouplement de
connecteurs quelconques multifibres

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX N
ICS 33.180.20 ISBN 978-2-88912-483-1

– 2 – 61300-3-45  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references. 5
3 General description . 5
3.1 Test methods . 5
3.2 Precautions . 6
4 Apparatus . 7
4.1 Source (S) . 7
4.2 Launch conditions (E) . 7
4.3 Detector (D). 7
5 Procedure . 8
5.1 Method 1 . 8
5.2 Method 2 . 10
5.3 Analysis of results . 13
6 Details to be specified . 13

Figure 1 – “Reference” cord measurement – Method 1 . 8
Figure 2 – Test cord measurement – Method 1 . 8
Figure 3 – Test matrix and labelling for measuring method 1 (2-fibre connector) . 9
Figure 4 – Test matrix and labelling for measuring method 1 (4-fibre connector) . 10
Figure 5 – Test matrix and labelling for measuring method 1 (8, 10, 12-fibre connector). 10
Figure 6 – “Reference” cord measurement (1) – Method 2 . 11
Figure 7 – Test cord measurement (1) – Method 2 . 11
Figure 8 – “Reference” cord measurement (2) – Method 2 . 12
Figure 9 – Test cord measurement (2) – Method 2 . 12
Figure 10 – Test matrix and labelling for measuring method 2 (2-fibre connector) . 12
Figure 11 – Test matrix and labelling for measuring method 2 (4-fibre connector) . 13
Figure 12 – Test matrix and labelling for measuring method 2 (8, 10, 12-fibre connector) . 13

Table 1 – Sample size for Method 1. 6
Table 2 – Sample size for Method 2. 6

61300-3-45  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 3-45: Examinations and measurements –
Attenuation of random mated multi-fibre connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-3-45 Ed.1.0 has been prepared by subcommittee 86B: Fibre
optic interconnecting devices and passive components, of IEC technical committee 86: Fibre
optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3177/FDIS 86B/3215/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

-----------------
...