iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

PSIST EN 300 422-2:2001

(Main)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

To identify the requirements of ETS 300 422 which are releant to article 3.2 of teh R&TTE Directive

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Tehnične karakteristike in preskušalne metode za brezžične mikrofone v frekvenčnem območju od 25 MHz do 3 GHz - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

Status
Withdrawn
Withdrawal Date
31-Aug-2001
ICS
33.060.99 - Other equipment for radiocommunications
33.100.01 - Electromagnetic compatibility in general
33.160.50 - Accessories
Technical Committee
RES - Radio equipment and systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2001
Due Date
01-Sep-2001
Completion Date
01-Sep-2001
Mandate
M/284
Ref Project
ETSI EN 300 422-2 V1.1.1 (2000-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

Relations

Official Journal Project Relation
SIST EN 300 422-2 V1.2.2:2008 - Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wireless microphones in the 25 MHz to 3 GHz frequency range - Part 2: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive
Effective Date
23-Nov-2009

Buy Standard

P EN 300 422-2:2001P EN 300 422-2:2001
PreviousNext
Standard
P EN 300 422-2:2001
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 300 422-2 2001EN 300 422-2 2001
PreviousNext
Standard
EN 300 422-2 2001
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.160.50PriborAccessories33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 422-2 Version 1.1.1PSIST EN 300 422-2:2001en01-MXOLM-2001PSIST EN 300 422-2:2001SLOVENSKI
STANDARD



PSIST EN 300 422-2:2001



ETSIEN300422-2V1.1.1(2000-08)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Wirelessmicrophonesinthe25MHzto3GHzfrequencyrange;Part2:HarmonizedENunderarticle3.2oftheR&TTEDirectivePSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)2ReferenceREN/ERM-RP08-0310-2KeywordsRadio,radioMIC,regulation,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.PSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)3ContentsIntellectualPropertyRights.4Foreword.4Introduction.51Scope.72References.83Definitions,symbolsandabbreviations.83.1Definitions.83.2Symbols.83.3Abbreviations.84Technicalrequirementsspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.1.3Conformance.94.2.2Carrierpower.94.2.2.1Definition.94.2.2.2Limit.94.2.2.3Conformance.94.2.3Channelbandwidth.94.2.3.1Definition.94.2.3.2Limit.94.2.3.3Conformance.94.2.4Spuriousemissions.104.2.4.1Definition.104.2.4.2Limit.104.2.4.3Conformance.104.3Receiverrequirements.104.3.1Spuriousemissions.104.3.1.1Definition.104.3.1.2Limit.104.3.1.3Conformance.105Testingforcompliancewithtechnicalrequirements.105.1Environmentalconditionsfortesting.105.2Interpretationofthemeasurementresults.105.3Essentialradiotestsuites.115.3.1Transmittertestsuites.115.3.1.1Frequencyerror.115.3.1.2Carrierpower.115.3.1.3Channelbandwidth.115.3.1.4Spuriousemissions.115.3.2Receivertestsuites.115.3.2.1Spuriousemissions.11AnnexA(normative):TheENRequirementsTable(EN-RT).12Bibliography.13History.14PSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM).Thepresentdocumentispart2ofamulti-partENcoveringtheElectromagneticcompatibilityandRadiospectrumMatters(ERM);Wirelessmicrophonesinthe25MHzto3GHzfrequencyrange,asidentifiedbelow:Part1:"Technicalcharacteristicsandtestmethods";Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC[5]layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective")[1].NationaltranspositiondatesDateofadoptionofthisEN:21July2000DateoflatestannouncementofthisEN(doa):31October2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30April2001DateofwithdrawalofanyconflictingNationalStandard(dow):30April2001PSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)5IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective.Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardsforhumanexposuretoElectromagneticFieldsand,ifneeded,newstandardsforacousticsafetyUseofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCExistingEMCstandardstobereplacedbyanew,single,multi-partstandardGenericandproductstandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDirective3.1aNewradioharmonisedstandardsSpectrumEMCSafetyFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectivePSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)6Thelefthandedgeofthefigure1showsthedifferentsubclausesofArticle3oftheR&TTEDirective.Forarticle3.3varioushorizontalboxesareshown.Dottedlinesindicatethatatthetimeofpublicat
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range. Part 2: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive33.160.50PriborAccessories33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 422-2 Version 1.2.2SIST EN 300 422-2:2001en01-september-2001SIST EN 300 422-2:2001SLOVENSKI
STANDARDPSIST EN 300 422-2:20011DGRPHãþD



SIST EN 300 422-2:2001



ETSIEN300422-2V1.1.1(2000-08)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Wirelessmicrophonesinthe25MHzto3GHzfrequencyrange;Part2:HarmonizedENunderarticle3.2oftheR&TTEDirectiveSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)2ReferenceREN/ERM-RP08-0310-2KeywordsRadio,radioMIC,regulation,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)3ContentsIntellectualPropertyRights.4Foreword.4Introduction.51Scope.72References.83Definitions,symbolsandabbreviations.83.1Definitions.83.2Symbols.83.3Abbreviations.84Technicalrequirementsspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.1.3Conformance.94.2.2Carrierpower.94.2.2.1Definition.94.2.2.2Limit.94.2.2.3Conformance.94.2.3Channelbandwidth.94.2.3.1Definition.94.2.3.2Limit.94.2.3.3Conformance.94.2.4Spuriousemissions.104.2.4.1Definition.104.2.4.2Limit.104.2.4.3Conformance.104.3Receiverrequirements.104.3.1Spuriousemissions.104.3.1.1Definition.104.3.1.2Limit.104.3.1.3Conformance.105Testingforcompliancewithtechnicalrequirements.105.1Environmentalconditionsfortesting.105.2Interpretationofthemeasurementresults.105.3Essentialradiotestsuites.115.3.1Transmittertestsuites.115.3.1.1Frequencyerror.115.3.1.2Carrierpower.115.3.1.3Channelbandwidth.115.3.1.4Spuriousemissions.115.3.2Receivertestsuites.115.3.2.1Spuriousemissions.11AnnexA(normative):TheENRequirementsTable(EN-RT).12Bibliography.13History.14SIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM).Thepresentdocumentispart2ofamulti-partENcoveringtheElectromagneticcompatibilityandRadiospectrumMatters(ERM);Wirelessmicrophonesinthe25MHzto3GHzfrequencyrange,asidentifiedbelow:Part1:"Technicalcharacteristicsandtestmethods";Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC[5]layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective")[1].NationaltranspositiondatesDateofadoptionofthisEN:21July2000DateoflatestannouncementofthisEN(doa):31October2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30April2001DateofwithdrawalofanyconflictingNationalStandard(dow):30April2001SIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)5IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective.Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardsforhumanexposuretoElectromagneticFieldsand,ifneeded,newstandardsforacousticsafetyUseofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCExistingEMCstandardstobereplacedbyanew,single,multi-partstandardGenericandproductstandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDirective3.1aNewradioharmonisedstandardsSpectrumEMCSafetyFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectiveSIST EN 300 422-2:2001



ETSIETSIEN300422-2V1.1.1(2000-08)6Thelefthandedgeofthefigure1showsthedifferentsubclausesofArticle3oftheR&TTEDirective.Forarticle3.3varioushorizontalboxesareshown.Dottedl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST I-ETS 300 422:1999(Main)
Radio Equipment and Systems (RES); Technical characteristics and test methods for wireless microphones in the 25 MHz to 3 GHz frequency range
ETSI I-ETS 300 422 ed.1 (1995-12)

Both technical and functional specifications of wide band audio wireless microphone systems and relevant measuring methods, ranging from HF up to and including UHF

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 422-2 V1.4.1:2015
Electromagnetic compatibility and Radio spectrum Matters (ERM);Wireless microphones in the 25 MHz to 3 GHz frequency range;Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 300 422-2 V1.4.1 (2015-06)

The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz, using
analogue, digital and hybrid (using both analogue and digital modulation) modulation.
The present document applies to the following radio equipment types:
• Professional Wireless Microphone Systems (PWMS);
• in ear monitoring systems;
• consumer radio microphones;
• tour guide systems; and
• Assistive Listening Devices (Aids for the handicapped) comprising personal and public hearing aid systems.
The maximum power recommended for equipment covered by the present document is 250 mW for radio microphones
and 500 mW for public hearing aids in the 169,4 MHz to 169,8125 MHz band (erp below 1 GHz and eirp above
1 GHz).
The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power
of 10 mW.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive):
Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated
to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    English language
    sale 15% off
SIST
SIST EN 300 422-1 V1.5.1:2015
Electromagnetic compatibility and Radio spectrum Matters (ERM);Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and methods of measurement
ETSI EN 300 422-1 V1.5.1 (2015-06)

The present document covers the minimum characteristics considered necessary in order to make the best use of the
available frequency spectrum for wireless microphones and Aids for the hearing impaired.
The present document specifies the minimum performance requirements and the methods of measurement of Assistive
Listening Devices, radio microphones and in-ear monitoring systems. It does not necessarily include all the
characteristics that may be required by a user, nor does it necessarily represent the optimum performance achievable.
The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz (as shown in
table 1) using analogue, digital and hybrid (using both analogue and digital) modulation.
The maximum power recommended for equipment covered by the present document is 250 mW for radio microphones
and 10 mW for ALDs.
An exception to this are the Public Hearing Aids defined in the CEPT Report 004 [i.9] and subsequent ECC [i.11] and
EC Decisions [i.10] on the ex ERMES band (169,4 MHz to 169,8125 MHz) where 500 mW is defined.
The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power
of 10 mW.
Electromagnetic Compatibility (EMC) requirements are covered by ETSI EN 301 489-9 [i.4].
National regulations on:
1) maximum power output;
2) licensing status;
will apply or those detailed in the latest version of:
• EC Decision 2005/928/EC [i.11];
• ECC/DEC/(05)02 [i.12];
• the EC SRD Decision [i.10]; or
• CEPT/ERC/REC 70-03 [i.8], annex 10 (see http://www.erodocdb.dk/).
Unless otherwise stated in the EC SRD Decision, ECC Decision or National Interfaces, Radio Microphones can be
subject to individual licence.
The types of equipment covered by the present document are as follows:
• in ear monitoring systems;
• consumer radio microphones;
• tour guide systems; and
• Assistive Listening Devices (Aids for the handicapped) comprising personal and public hearing aid systems.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    56 pages
    English language
    sale 15% off
SIST
SIST EN 300 422-1 V1.4.2:2011(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wireless microphones in the 25 MHz to 3 GHz frequency range - Part 1: Technical characteristics and methods of measurement
ETSI EN 300 422-1 V1.4.2 (2011-08)

The present document covers the minimum characteristics considered necessary in order to make the best use of the available frequency spectrum for wireless microphones and Aids for the hearing impaired.
The present document specifies the minimum performance requirements and the methods of measurement of Assistive Listening Devices, radio microphones and in-ear monitoring systems. It does not necessarily include all the characteristics that may be required by a user, nor does it necessarily represent the optimum performance achievable.
The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz (as shown in table 1) using analogue, digital and hybrid (using both analogue and digital) modulation.
The maximum power recommended for equipment covered by the present document is 250 mW for radio microphones and 10 mW for ALDs.
An exception to this are the Public Hearing Aids defined in the CEPT Report 004 [i.10] and subsequent ECC [i.12] and EC Decisions [i.11] on the ex ERMES band [169,4 MHz to 169,8125 MHz] where 500 mW is defined.
The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power of 10 mW.
Electromagnetic Compatibility (EMC) requirements are covered by EN 301 489-9 [i.5].
National regulations on:
1) maximum power output;
2) licensing status.
will apply or those detailed in the latest version of:
• EC Decision 2005/928/EC [i.12];
• ECC/DEC/(05)02 [i.13];
• the EC SRD Decision [i.11]; or
• CEPT/ERC/REC 70-03 [i.9], annex 10 (see http://www.erodocdb.dk/).
Unless otherwise stated in the EC SRD Decision, ECC Decision or National Interfaces, Radio Microphones can be subject to individual licence.
The types of equipment covered by the present document are as follows:
• Professional Wireless Microphone Systems (PWMS) [i.1];
• in ear monitoring systems;
• consumer radio microphones;
• tour guide systems; and
• Assistive Listening Devices (Aids for the handicapped) comprising personal and public hearing aid systems.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 422-2 V1.3.1:2011(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wireless microphones in the 25 MHz to 3 GHz frequency range - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 300 422-2 V1.3.1 (2011-08)

The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz, using analogue, digital and hybrid (using both analogue and digital modulation) modulation.
The present document applies to the following radio equipment types:
• Professional Wireless Microphone Systems (PWMS);
• in ear monitoring systems;
• consumer radio microphones;
• tour guide systems; and
• Assistive Listening Devices (Aids for the handicapped) comprising personal and public hearing aid systems.
The maximum power recommended for equipment covered by the present document is 250 mW for radio microphones and 500 mW for public hearing aids in the 169,4 MHz to 169,8125 MHz band (erp below 1 GHz and eirp above 1 GHz).
The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power of 10 mW.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive): Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 422-2 V1.2.2:2008(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wireless microphones in the 25 MHz to 3 GHz frequency range - Part 2: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive
ETSI EN 300 422-2 V1.2.2 (2008-01)

The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz, using analogue, digital and hybrid (using both analogue and digital modulation). The present document does not apply to radio microphones or in ear monitoring equipment employing Time Division Multiple Access (TDMA), modulation.
The present document applies to the following radio equipment types:
1) professional hand held radio microphones;
2) professional body worn radio microphones;
3) in ear monitoring systems, etc.;
4) consumer radio microphones;
5) tour guide systems;
6) Assistive Listening Devices (Aids for the handicapped).
The maximum power recommended for equipment covered by the present document is 250 mW (erp below 1 GHz and eirp above 1 GHz).
The present document is intended to cover the provisions of Directive 1999/5/EC (R&TTE Directive) [2], Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 422-1 V1.3.2:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wireless microphones in the 25 MHz to 3 GHz frequency range - Part 1: Technical characteristics and methods of measurement
ETSI EN 300 422-1 V1.3.2 (2008-03)

To  investigate the items listed in GSC-10/8(GRSC) Radio microphones and cordless audio Standardization, and  prepare changes to EN 300422 plus  GRSC 001 and TS 102-192. This work item will also consider the incorperation of  EN 301-840 into the final document.The present document covers the minimum characteristics considered necessary in order to make the best use of the available frequency spectrum for wireless microphones. The present document specifies the minimum performance requirements and the methods of measurement of Assistive Listening Devices, radio microphones and in-ear monitoring systems. It does not necessarily include all the characteristics that may be required by a user, nor does it necessarily represent the optimum performance achievable. The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz  using analogue, digital and hybrid (using both analogue and digital) modulation. The present document does not apply to radio microphones or in ear monitoring equipment employing Time Division Multiple Access (TDMA) modulation.
The maximum power recommended for equipment covered by the present document is 250 mW (erp below 1 GHz and eirp above 1 GHz). Equipment above 250 mW should be tested to EN 300 454-1 [6].
The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power of 10 mW.
Electromagnetic Compatibility (EMC) requirements are covered by EN 301 489-9 [7].
National regulations on maximum power output will apply or those detailed in the latest version of
CEPT/ERC/REC 70-03 [11], annex 10 (see http://www.erodocdb.dk/).
The classes of equipment given in the present document are as follows:
- class 1 equipment would normally be considered as a category requiring an operator licence;
- class 2 equipment would be considered in some countries as not requiring an operator licence.
The types of equipment covered by the present document are as follows:
• professional hand held radio microphones;
• professional body worn radio microphones;
• in ear monitoring systems;
• consumer radio microphones;
• tour guide systems; and
• Assistive Listening Devices (Aids for the handicapped).

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 422 V1.2.1:2003(Main)
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technical characteristics and test methods for wireless microphones in the 25 MHz to 3 GHz frequency range
ETSI EN 300 422 V1.2.1 (1999-07)

Amend I-ETS 300 422 to upgrade spectrum management aspects and convert to EN. Extend scope to cover: Cordless audio headphones (mono & stereo); cordless audio loudspeakers; professional in-ear monitoring systems.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 422-1 V1.2.2:2003(Main)
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and test methods
ETSI EN 300 422-1 V1.2.2 (2000-08)

Editrial modifications of EN 300 422 consequent to the adoption of EN 300 422-2

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST I-ETS 300 422:1999(Main)
Radio Equipment and Systems (RES); Technical characteristics and test methods for wireless microphones in the 25 MHz to 3 GHz frequency range
ETSI I-ETS 300 422 ed.1 (1995-12)

Both technical and functional specifications of wide band audio wireless microphone systems and relevant measuring methods, ranging from HF up to and including UHF

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day