SIST EN 17396:2020
(Main)Resilient floor coverings - Quartz vinyl tiles - Specification
Resilient floor coverings - Quartz vinyl tiles - Specification
This European Standard specifies the characteristics of quartz vinyl tiles based on polyvinyl chloride binder, quartz sand as a sole or partial filler and supplied in tile form.
Elastische Bodenbeläge - Quartzvinylplatten - Spezifikation
Dieses Dokument legt die Merkmale von homogenen Quarzvinylplatten auf der Grundlage von Polyvinylchlorid-Bindemitteln mit Quarzsand als alleinigem oder teilweisem Füllstoff, mit oder ohne eine transparente, nicht aus PVC bestehende Oberflächenausführung und in Plattenform fest.
Zur Unterstützung des Verbrauchers bei seiner Auswahl enthält dieses Dokument ein Klassifizierungssystem (siehe EN ISO 10874) auf Basis der Nutzungsintensität, das zeigt, wofür diese Bodenbeläge zufriedenstellend eingesetzt werden können. Dieses Dokument legt auch die Anforderungen zur Kennzeichnung fest.
Revêtements de sol résilients - Dalles en quartz-vinyle - Spécifications
Le présent document spécifie les caractéristiques des dalles homogènes en quartz-vinyle à base de liant en polychlorure de vinyle, de sable de quartz comme charge partielle ou unique, avec ou sans finition d’usine transparente non PVC et fournies sous forme de dalles.
Pour aider le consommateur à faire un choix éclairé, le présent document inclut un système de classification (voir EN ISO 10874) basé sur l’intensité d’utilisation, indiquant l’endroit où le revêtement de sol est supposé rendre un service satisfaisant. Il spécifie également les exigences de marquage.
Netekstilne talne obloge - Kremenove vinilne ploščice - Specifikacija
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17396:2020
01-september-2020
Netekstilne talne obloge - Kremenove vinilne ploščice - Specifikacija
Resilient floor coverings - Quartz vinyl tiles - Specification
Elastische Bodenbeläge - Quartzvinylplatten - Spezifikation
Revêtements de sol résilients - Dalles en quartz-vinyle - Spécifications
Ta slovenski standard je istoveten z: EN 17396:2020
ICS:
97.150 Talne obloge Floor coverings
SIST EN 17396:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17396:2020
---------------------- Page: 2 ----------------------
SIST EN 17396:2020
EN 17396
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 97.150
English Version
Resilient floor coverings - Quartz vinyl tiles - Specification
Revêtements de sol résilients - Dalles en quartz-vinyle Elastische Bodenbeläge - Quartzvinylplatten -
- Spécifications Spezifikation
This European Standard was approved by CEN on 3 May 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17396:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17396:2020
EN 17396:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
5 Classification. 6
6 Marking, labelling and packaging . 9
Annex A (informative) Optional properties . 10
Bibliography . 11
2
---------------------- Page: 4 ----------------------
SIST EN 17396:2020
EN 17396:2020 (E)
European foreword
This document (EN 17396:2020) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate floor covering”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 17396:2020
EN 17396:2020 (E)
1 Scope
This document specifies the characteristics of homogeneous quartz vinyl tiles based on polyvinyl
chloride binder, quartz sand as a sole or partial filler, with or without a transparent, non-PVC factory
finish and supplied in tile form.
To encourage the consumer to make an informed choice, this document includes a classification system
(see EN ISO 10874) based on intensity of use, which shows where these floor coverings will give
satisfactory service. It also specifies requirements for marking.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 105-B02:2014, Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 10874, Resilient, textile and laminate floor coverings - Classification (ISO 10874)
EN ISO 23997, Resilient floor coverings - Determination of mass per unit area (ISO 23997)
EN ISO 23999, Resilient floor coverings - Determination of dimensional stability and curling after exposure
to heat (ISO 23999)
EN ISO 24342, Resilient and textile floor-coverings - Determination of side length, edge straightness and
squareness of tiles (ISO 24342)
EN ISO 24343-1, Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 1: Residual indenta
...
SLOVENSKI STANDARD
oSIST prEN 17396:2019
01-junij-2019
Netekstilne talne obloge - Kremenove vinilne ploščice - Specifikacija
Resilient floor coverings - Quartz vinyl tiles - Specification
Elastische Bodenbeläge - Quartzvinylplatten - Spezifikation
Ta slovenski standard je istoveten z: prEN 17396
ICS:
97.150 Talne obloge Floor coverings
oSIST prEN 17396:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17396:2019
---------------------- Page: 2 ----------------------
oSIST prEN 17396:2019
DRAFT
EUROPEAN STANDARD
prEN 17396
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 97.150
English Version
Resilient floor coverings - Quartz vinyl tiles - Specification
Elastische Bodenbeläge - Quartzvinylplatten -
Spezifikation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17396:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17396:2019
prEN 17396:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
5 Classification. 6
6 Marking, labelling and packaging . 8
Annex A (informative) Optional properties . 9
Bibliography . 10
2
---------------------- Page: 4 ----------------------
oSIST prEN 17396:2019
prEN 17396:2019 (E)
European foreword
This document (prEN 17396:2019) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate floor covering”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
3
---------------------- Page: 5 ----------------------
oSIST prEN 17396:2019
prEN 17396:2019 (E)
1 Scope
This document specifies the characteristics of homogeneous quartz vinyl tiles based on polyvinyl
chloride binder, quartz sand as a sole or partial filler and supplied in tile form. Products may contain a
transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system
(see EN ISO 10874) based on intensity of use, which shows where these floor coverings will give
satisfactory service. It also specifies requirements for marking.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 105-B02:2014, Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 10874, Resilient, textile and laminate floor coverings - Classification (ISO 10874)
EN ISO 23997, Resilient floor coverings - Determination of mass per unit area (ISO 23997)
EN ISO 23999, Resilient floor coverings - Determination of dimensional stability and curling after exposure
to heat (ISO 23999)
EN ISO 24342, Resilient and textile floor-coverings - Determination of side length, edge straightness and
squareness of tiles (ISO 24342)
EN ISO 24343-1, Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 1: Residual indentation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.