SIST EN ISO 9241-11:2001
(Main)Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998)
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998)
Migrated from Progress Sheet (TC Comment) (2000-07-10): Following BT 125/1992, this part of ISO 9241 will undergo a parallel CEN/ISO ++ voting procedure.
Ergonomische Anforderungen für Bürotätigkeiten mit Bildschirmgeräten - Teil 11: Anforderungen an die Gebrauchstauglichkeit - Leitsätze (ISO 9241-11:1998)
ISO 9241-11 definiert Gebrauchstauglichkeit und erläutert, wie die notwendige Information gewonnen werden kann, um die Gebrauchstauglichkeit von Produkten zu spezifizieren oder zu evaulieren, und zwar durch Maße der Benutzungseffizienz und der Zufriedenstellung Darüber hinaus werden Anleitungengegeben, wie der Benutzungskontext eines Produkts (Hardware, Software oder Dienste) und die relevanten Maße der Gebrauchstauglichkeit explizit beschrieben werden können.
Exigences ergonomiques pour travail de bureau avec terminaux a écrans de visualisation (TEV) - Partie 11: Lignes directrices concernant l'utilisabilité (ISO 9241-11:1998)
La CEI/TS 61994-2:2011 est une spécification technique qui contient les termes et définitions pour les filtres piézoélectriques et diélectriques représentant la pointe de la technologie, destinés à être utilisés dans les normes et documents du comité d'études 49 de la CEI. Les modifications principales par rapport à l'édition antérieure sont les suivantes:
- mise à jour des définitions,
- terminologie donnée selon un schéma bien ordonné,
- ajout de nouvelles terminologies,
- insertion de schémas pour une meilleure compréhension.
Ergonomske zahteve za pisarniško delo s slikovno zaslonsko opremo - 11. del: Navodila za uporabnost (ISO 9241-11:1998)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9241-11:2001
01-junij-2001
Ergonomske zahteve za pisarniško delo s slikovno zaslonsko opremo - 11. del:
Navodila za uporabnost (ISO 9241-11:1998)
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11:
Guidance on usability (ISO 9241-11:1998)
Ergonomische Anforderungen für Bürotätigkeiten mit Bildschirmgeräten - Teil 11:
Anforderungen an die Gebrauchstauglichkeit - Leitsätze (ISO 9241-11:1998)
Exigences ergonomiques pour travail de bureau avec terminaux a écrans de
visualisation (TEV) - Partie 11: Lignes directrices concernant l'utilisabilité (ISO 9241-
11:1998)
Ta slovenski standard je istoveten z: EN ISO 9241-11:1998
ICS:
13.180 Ergonomija Ergonomics
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST EN ISO 9241-11:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9241-11:2001
---------------------- Page: 2 ----------------------
SIST EN ISO 9241-11:2001
---------------------- Page: 3 ----------------------
SIST EN ISO 9241-11:2001
---------------------- Page: 4 ----------------------
SIST EN ISO 9241-11:2001
INTERNATIONAL ISO
STANDARD 9241-11
First edition
1998-03-15
Ergonomic requirements for office work
with visual display terminals (VDTs) —
Part 11:
Guidance on usability
Exigences ergonomiques pour travail de bureau avec terminaux à écrans
de visualisation (TEV) —
Partie 11: Lignes directrices relatives à l'utilisabilité
A
Reference number
ISO 9241-11:1998(E)
---------------------- Page: 5 ----------------------
SIST EN ISO 9241-11:2001
ISO 9241-11:1998(E)
Contents Page
1 Scope. 1
2 Normative reference. 1
3 Definitions. 2
..................................................................
4 Rationale and benefits 2
5 Specifying and measuring the usability of products. 3
6 Specification and evaluation of usability during design. 6
7 Specifying and measuring a work system in use . 7
Annex A: Example of how to specify the context of use . 8
Annex B: Examples of usability measures. 10
Annex C: Example of a usability requirements specification . 14
Annex D: Relationship to other International Standards . 19
Annex E: Bibliography. 21
© ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
---------------------- Page: 6 ----------------------
SIST EN ISO 9241-11:2001
©
ISO ISO 9241-11:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 9241-11 was prepared by Technical Committee
ISO/TC 159, Ergonomics, Subcommittee SC 4, Ergonomics of human-
system interaction.
ISO 9241 consists of the following parts, under the general title Ergonomic
requirements for office work with visual display terminals (VDTs):
— Part 1: General Introduction
— Part 2: Guidance on task requirements
— Part 3: Visual display requirements
— Part 4: Keyboard requirements
— Part 5: Workstation layout and postural requirements
— Part 6: Environmental requirements
— Part 7: Requirements for display with reflections
— Part 8: Requirements for displayed colours
— Part 9: Requirements for non-keyboard input devices
— Part 10: Dialogue principles
— Part 11: Guidance on usability
— Part 12: Presentation of information
— Part 13: User guidance
— Part 14: Menu dialogues
— Part 15: Command dialogues
— Part 16: Direct manipulation dialogues
— Part 17: Form-filling dialogues
Annexes A to E of this part of ISO 9241 are for information only.
iii
---------------------- Page: 7 ----------------------
SIST EN ISO 9241-11:2001
©
ISO 9241-11:1998(E) ISO
Introduction
The objective of designing and evaluating visual display terminals for
usability is to enable users to achieve goals and meet needs in a particular
context of use. ISO 9241-11 explains the benefits of measuring usability in
terms of user performance and satisfaction. These are measured by the
extent to which the intended goals of use are achieved, the resources that
have to be expended to achieve the intended goals, and the extent to
which the user finds the use of the product acceptable.
ISO 9241-11 emphasizes that visual display terminal usability is dependent
on the context of use and that the level of usability achieved will depend on
the specific circumstances in which a product is used. The context of use
consists of the users, tasks, equipment (hardware, software and materials),
and the physical and social environments which may all influence the
usability of a product in a work system. Measures of user performance and
satisfaction assess the overall work system, and, when a product is the
focus of concern, these measures provide information about the usability of
that product in the particular context of use provided by the rest of the work
system. The effects of changes in other components of the work system,
such as the amount of user training, or the improvement of the lighting, can
also be measured by user performance and satisfaction.
The term usability is sometimes used to refer more narrowly to the
attributes of a product which make it easier to use (see Annex D).
Requirements and recommendations relating to the attributes of the
hardware, software and environment which contribute to visual display
terminal usability, and the ergonomic principles underlying them, are
provided in other parts of ISO 9241.
iv
---------------------- Page: 8 ----------------------
SIST EN ISO 9241-11:2001
©
INTERNATIONAL STANDARD ISO ISO 9241-11:1998(E)
Ergonomic requirements for office work with visual display
terminals (VDTs) —
Part 11:
Guidance on usability
1 Scope
ISO 9241-11 defines usability and explains how to identify the information which is necessary to take into account
when specifying or evaluating usability of a visual display terminal in terms of measures of user performance and
satisfaction. Guidance is given on how to describe the context of use of the product (hardware, software or service)
and the relevant measures of usability in an explicit way. The guidance is given in the form of general principles
and techniques, rather than in the form of requirements to use specific methods.
The guidance in ISO 9241-11 can be used in procurement, design, development, evaluation, and communication of
information about usability. ISO 9241-11 includes guidance on how the usability of a product can be specified and
evaluated. It applies both to products intended for general application and products being acquired for or being
developed within a specific organization.
ISO 9241-11 also explains how measures of user performance and satisfaction can be used to measure how any
component of a work system affects the whole work system in use.
The guidance includes procedures for measuring usability but does not detail all the activities to be undertaken.
Specification of detailed user-based methods of measurement is beyond the scope of ISO 9241-11, but further
information can be found in Annex B and the bibliography in Annex E.
ISO 9241-11 applies to office work with visual display terminals. It can also apply in other situations where a user is
interacting with a product to achieve goals. ISO 9241 parts 12 to 17 provide conditional recommendations which are
applicable in specific contexts of use. he guidance in this Part of ISO 9241 can be used in conjunction with ISO
9241 Parts 12 to 17 in order to help identify the applicability of individual recommendations.
ISO 9241-11 focuses on usability and does not provide comprehensive coverage of all objectives of ergonomic
design referred to in ISO 6385. However, design for usability will contribute positively to ergonomic objectives, such
as the reduction of possible adverse effects of use on human health, safety and performance.
ISO 9241-11 does not cover the processes of system development. Human-centred design processes for
interactive systems are described in ISO 13407.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this part of
ISO 9241. At the time of publication, the edition indicated was valid. All standards are subject to revision, and
parties to agreements based on this part of ISO 9241 are encouraged to investigate the possibility of applying the
most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid
International Standards.
ISO 6385:1981, Ergonomic requirements in the design of work systems.
1
---------------------- Page: 9 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
3 Definitions
For the purposes of this part of ISO 9241, the following definitions apply:
3.1 usability: Extent to which a product can be used by specified users to achieve specified goals with
effectiveness, efficiency and satisfaction in a specified context of use.
NOTE — See Annex D for other approaches to usability.
3.2 effectiveness: Accuracy and completeness with which users achieve specified goals.
3.3 efficiency: Resources expended in relation to the accuracy and completeness with which users achieve goals.
3.4 satisfaction: Freedom from discomfort, and positive attitudes towards the use of the product.
3.5 context of use: Users, tasks, equipment (hardware, software and materials), and the physical and social
environments in which a product is used.
3.6 work system: System, consisting of users, equipment, tasks and a physical and social environment, for the
purpose of achieving particular goals.
NOTE — The context of use consists of those components of the work system which are treated as given when specifying or
measuring usability.
3.7 user: Person who interacts with the product.
3.8 goal: Intended outcome.
3.9 task: Activities required to achieve a goal.
NOTE 1 These activities can be physical or cognitive.
NOTE 2 Job responsibilities can determine goals and tasks.
3.10 product: Part of the equipment (hardware, software and materials) for which usability is to be specified or
evaluated.
3.11 measure (noun) : Value resulting from measurement and the process used to obtain that value.
4 Rationale and benefits
Usability is an important consideration in the design of products because it is concerned with the extent to which the
users of products are able to work effectively, efficiently and with satisfaction.
The usability of products can be improved by incorporating features and attributes known to benefit the users in a
particular context of use. In order to determine the level of usability achieved, it is necessary to measure the
performance and satisfaction of users working with a product. Measurement of usability is particularly important in
view of the complexity of the interactions between the user, the goals, the task characteristics and the other
elements of the context of use. A product can have significantly different levels of usability when used in different
contexts.
Planning for usability as part of the design and development of products involves the systematic identification of
requirements for usability, including usability measures and verifiable descriptions of the context of use. These
provide design targets which can be the basis for verification of the resulting design.
2
---------------------- Page: 10 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
The approach adopted in ISO 9241-11 has benefits which include:
— The framework can be used to identify the aspects of usability and the components of the context of use to be
taken into account when specifying, designing or evaluating the usability of a product.
— The performance (effectiveness and efficiency) and satisfaction of the users can be used to measure the extent
to which a product is usable in a particular context.
— Measures of the performance and satisfaction of the users can provide a basis for the comparison of the relative
usability of products with different technical characteristics which are used in the same context
— The usability planned for a product can be defined, documented and verified (e.g. as part of a quality plan).
5 Specifying and measuring the usability of products
5.1 Framework for specifying usability
5.1.1 Purpose
The framework describes the components of usability and the relationship between them.
5.1.2 Components of usability
In order to specify or measure usability it is necessary to identify the goals and to decompose effectiveness,
efficiency and satisfaction and the components of the context of use into sub-components with measurable and
verifiable attributes. The components and the relationships between them are illustrated in figure 1.
Figure 1 — Usability framework
5.1.3 Information needed
When specifying or measuring usability, the following information is needed:
— a description of the intended goals;
— a description of the components of the context of use including users, tasks, equipment, and environments. This
may be a description of an existing context, or a specification of intended contexts. The relevant aspects of the
context and the level of detail required will depend on the scope of the issues being addressed. The description
of the context needs to be sufficiently detailed so that those aspects of the context which may have a significant
influence on usability could be reproduced;
— target or actual values of effectiveness, efficiency, and satisfaction for the intended contexts.
3
---------------------- Page: 11 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
5.2 Description of goals
The goals of use of a product should be described. Goals may be decomposed into subgoals which specify
components of an overall goal and the criteria which would satisfy that goal. For example, a telephone sales clerk
might have the goal to "Maintain customer orders". This overall goal might then be decomposed into subgoals such
as:
— "Make accurate record of all orders placed by customers";
— "Provide information rapidly in response to customer inquiries about orders placed".
The level at which the overall goal is set is a function of the boundary of the work system which is under
consideration and which provides the context of use. In the example above, the work system under consideration
consists of clerks taking telephone orders.
5.3 Context of use
5.3.1 Description of users
Relevant characteristics of the users need to be described. These can include knowledge, skill, experience,
education, training, physical attributes, and motor and sensory capabilities. It may be necessary to define the
characteristics of different types of user, for example users having different levels of experience or performing
different roles.
5.3.2 Description of tasks
Tasks are the activities undertaken to achieve a goal. Characteristics of tasks which may influence usability should
be described, e.g. the frequency and the duration of the task.
Detailed descriptions of the activities and processes may be required if the description of the context is to be used
as a basis for the design or evaluation of details of interaction with the product. This may include description of the
allocation of activities and steps between the human and technological resources. Tasks should not be described
solely in terms of the functions or features provided by a product or system. Any description of the activities and
steps involved in performing the task should be related to the goals which are to be achieved.
For the purposes of evaluating usability, a set of key tasks will typically be selected to represent the significant
aspects of the overall task.
NOTE — User tasks and subtasks can be identified by task analysis (for more information see the bibliography in Annex E).
5.3.3 Description of equipment
Relevant characteristics of the equipment need to be described. The description of the hardware, software and
materials associated with a visual display terminal may be in terms of a set of products (or system components),
one or more of which may be the focus of usability specification or evaluation, or it may be in terms of a set of
attributes or performance characteristics of the hardware, software and other materials.
5.3.4 Description of environments
Relevant characteristics of the physical and social environment need to be described. Aspects which may need to
be described include attributes of the wider technical environment (e.g. the local area network), the physical
environment (e.g. workplace, furniture), the ambient environment (e.g. temperature, humidity) and the social and
cultural environment (e.g. work practices, organisational structure and attitudes).
5.3.5 Examples
Annex A gives examples of how the components of the context of use can be described in terms of characteristics
which may be relevant to usability.
4
---------------------- Page: 12 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
5.4 Usability measures
5.4.1 Choice of measures
It is normally necessary to provide at least one measure for each of effectiveness, efficiency and satisfaction.
Because the relative importance of components of usability depends on the context of use and the purposes for
which usability is being described, there is no general rule for how measures should be chosen or combined.
The choice of measures and the level of detail of each measure, is dependent on the objectives of the parties
involved in the measurement. The relative importance of each measure to the goals should be considered. For
example where usage is infrequent, high importance may be given to measures of learning and re-learning.
If it is not possible to obtain objective measures of effectiveness and efficiency, subjective measures based on the
user's perception can provide an indication of effectiveness and efficiency.
5.4.2 Effectiveness
Measures of effectiveness relate the goals or subgoals of the user to the accuracy and completeness with which
these goals can be achieved.
For example if the desired goal is to accurately reproduce a two-page document in a specified format, then
accuracy could be specified or measured by the number of spelling mistakes and the number of deviations from the
specified format, and completeness by the number of words of the document transcribed divided by the number of
words in the source document.
5.4.3 Efficiency
Measures of efficiency relate the level of effectiveness achieved to the expenditure of resources. Relevant
resources can include mental or physical effort, time, materials or financial cost. For example, human efficiency
could be measured as effectiveness divided by human effort, temporal efficiency as effectiveness divided by time,
or economic efficiency as effectiveness divided by cost.
If the desired goal is to print copies of a report, then efficiency could be specified or measured by the number of
usable copies of the report printed, divided by the resources spent on the task such as labour hours, process
expense and materials consumed.
5.4.4 Satisfaction
Satisfaction measures the extent to which users are free from discomfort, and their attitudes towards the use of the
product.
Satisfaction can be specified and measured by subjective rating on scales such as discomfort experienced, liking
for the product, satisfaction with product use, or acceptability of the workload when carrying out different tasks, or
the extent to which particular usability objectives (such as efficiency or learnability) have been met. Other measures
of satisfaction might include the number of positive and negative comments recorded during use. Additional
information can be obtained from longer-term measures such as rate of absenteeism, observation of overloading or
underloading of the user’s cognitive or physical workload, or from health problem reports, or the frequency with
which users request transfer to another job.
5.4.5 Further examples
Further examples of measures that can be used for assessing usability are included in Annexes B and C.
5.5 Interpretation of measures
Care should be taken in generalizing the results of any measurement of usability to another context which may have
significantly different types of users, tasks or environments. If measures of usability are obtained over short periods
of time, the values may not take account of infrequent events which could have a significant impact on usability, for
example intermittent system errors.
For a general-purpose product, it will generally be necessary to specify or measure usability in several different
representative contexts, which will be a subset of the possible contexts and of the tasks which can be performed.
There may be differences between usability in these contexts.
5
---------------------- Page: 13 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
6 Specification and evaluation of usability during design
6.1 Specification of the intended context of use for a product
Information about the characteristics of users, their goals and tasks and the environments in which the tasks are
carried out provides important information for use in the specification of overall product requirements, prior to
development of specific usability requirements.
6.2 Specification of usability requirements for a product
Prior to development, an organisation seeking to acquire a product specifically adapted to its needs can use the
information in ISO 9241-11 as a framework for specifying the usability requirements which the product should meet
and against which acceptance testing may be carried out. Specific contexts in which usability is to be measured
should be identified, measures of effectiveness, efficiency and satisfaction selected, and acceptance criteria based
on these measures established (an example is given in Annex C).
6.3 Product development
The definition and framework for usability can be used by product development teams to establish a common
understanding of the concept of usability, and can help product development teams address the breadth of issues
associated with product usability.
A developer can use the guidance in ISO 9241-11 to help specify usability targets for the product (see Annex C). At
various stages during the development process the developer can measure the usability achieved against these
targets. This information enables objective decisions to be taken about the need for design changes to enhance
usability, and about trade-offs which may be appropriate between usability and other requirements.
6.4 Specification or evaluation of product attributes
The guidance on context of use can be used to identify the users, tasks and environments so that more accurate
judgements can be made about the needs for particular product attributes.
6.5 Usability measurement
ISO 9241-11 provides information to support measurement of usability. For example, description of the
characteristics of users can assist with the selection of users to participate in evaluation. Identification of user's
goals can assist with the selection of appropriate tasks for usability testing or reviews. The characteristics of the
environment in which a product is likely to be used need to be described if that environment has to be simulated to
ensure the validity of test results.
ISO 9241-11 also provides a basis from which measures of usability can be generated. Product developers can
develop appropriate measures of efficiency, effectiveness, and/or satisfaction (see Annex B).
6.6 Usability input to a quality plan
The activities listed in 6.1 to 6.5 can provide a basis for defining, documenting and verifying usability as a part of a
quality plan. Figure 2 outlines the relationship between these activities and the resulting documents and other forms
of output. These could be included in a quality plan (e.g. as described in ISO 9000-3).
6.7 Comparative evaluation of products
The guidance in ISO 9241-11 can be used to assist in making a choice between products already available. Having
specified the usability requirements in terms of the intended goals, context of use and which measures of
effectiveness, efficiency and satisfaction are to be used, the guidance can then be used to specify test conditions
and evaluation criteria. The test conditions should be representative of important aspects of the overall context of
use.
6
---------------------- Page: 14 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
Figure 2 — Usability activities and associated documents
6.8 Use with other International Standards
Other parts of ISO 9241, such as ISO 9241-14, contain recommendations which are applicable in particular
contexts of use. The guidance in ISO 9241-11 can be used to provide a framework for identifying the goals and
context of use which is relevant to the design decision to be made. Annex D contains more information on the
relationship with other parts of ISO 9241 and other International Standards.
7 Specifying and measuring a work system in use
7.1 Relationship to usability
If the aim is to improve the overall work system, any part of the work system can be the subject of design or
evaluation. Measures of effectiveness, efficiency and satisfaction can be used to evaluate any component of the
work system. For example, it may be appropriate to consider the amount of user training to be provided, changes in
lighting, or re-organisation of the task. In each case the element which is the object of design or evaluation is
considered to be subject to potential variation, while the other elements of the work system are treated as fixed.
When a product is the focus of concern, these measures provide information about the usability of that product in
the particular context of use provided by the rest of the work system.
7.2 Examples of application
7.2.1 Design of a complete work system
When designing a complete work system usability can be optimised by changing components of the context of use
of a product, such as the version of the operating system, lighting or amount of user training. In this case measures
of effectiveness, efficiency and satisfaction can be used to specify or evaluate the effect of a new version of the
operating system, different types of lighting, or different amounts of user training respectively.
7.2.2 Diagnostic evaluation
If a work system is judged to be unsatisfactory, systematic analyses of the contribution of different components of
the context of use should be conducted. Both direct contributions and the interactions between the components of
the context of use should be considered in order to determine the principal causes of the problems. This process
may also be used to identify which components are amenable to change, in order to bring about improvements in
the overall work system. Diagnostic activity relating to the context of use is often necessary to determine whether
problems are due to the product or other components of the work system.
7
---------------------- Page: 15 ----------------------
SIST EN ISO 9241-11:2001
©
ISO
ISO 9241-11:1998(E)
Annex A
(informative)
Example of how to specify the context of use
Table A.1 (based on E.2.2 and E.2.18) gives an example of how the context of use can be specified in terms of
attributes which may be relevant to the usability. A product to be used in a particular context can be specified under
these headings. Specifications may be either in terms of relevant characteristics, or the identification of a specific
instance. When specifying a particular instance of a product which can be customised, adaptations which have
been made to the default characteristics of the product should be specified.
Verifiable and repeatable descriptions of usability require measures of usability which can be repeated in a specified
context. Unless evaluation of usability can take place in conditions of actual use, it will be necessary to decide which
attributes of the actual or intended context of use are to be represented in the context which is specified for
evaluation. When specifying or evaluating usability it is therefore important that the context selected is
r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.