SIST EN 50144-2-5:1999

Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives

This clause of Part 1 is applicable except as follows :     1.1 Addition: This standard applies to all types of circular saws for cutting wood and similar materials, and to circular knives.     These requirements do not cover circular saws when mounted in a support for use as fixed tools.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere Anforderungen an Kreissägen und Rundmesser

Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les scies circulaires et les couteaux circulaires

Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-1999
• Withdrawal Date: 30-Apr-2002
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2002
• Due Date: 01-May-2002
• Completion Date: 01-May-2002
• Mandate: M/083 - Machinery
• Ref Project: EN 50144-2-5:1996 - Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

Relations

• Replaced By: SIST EN 50144-2-5:2000 - Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 50144-2-5:2000 - Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives
• Effective Date: 06-May-2014
• Replaces: SIST HD 400.2E S2:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section E: Circular saws and circular knives
• Effective Date: 29-Jan-2023
• Replaces: SIST HD 400.2E S2:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section E: Circular saws and circular knives
• Effective Date: 06-May-2014
• Replaces: SIST HD 400.2E S2:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section E: Circular saws and circular knives
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-5:1999
01-julij-1999
1DGRPHãþD
SIST HD 400.2E S2:1995
Safety of hand-held electric motor operated tools - Part 2-5: Particular
requirements for circular saws and circular knives
Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for
circular saws and circular knives
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere
Anforderungen an Kreissägen und Rundmesser
Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les
scies circulaires et les couteaux circulaires
Ta slovenski standard je istoveten z: EN 50144-2-5:1996
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-5:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-5:1999

---------------------- Page: 2 ----------------------

SIST EN 50144-2-5:1999

---------------------- Page: 3 ----------------------

SIST EN 50144-2-5:1999

---------------------- Page: 4 ----------------------

SIST EN 50144-2-5:1999

---------------------- Page: 5 ----------------
...